Rietschle DTA 40 Replacement Carbon Vanes – 523879
RIETSCHLE DTA 40 REPLACEMENT CARBON VANES
Buy Rietschle DTA 40 replacement carbon vanes from VacAir Superstore, an established UK supplier of vacuum pump and compressor spare parts. We supply the 135 × 37 × 4 mm vane under OEM reference 523879. The DTA 40 requires six vanes for a complete replacement, with a minimum permitted vane height of 27 mm. Our experienced spares department can assist with part identification, maintenance orders and delivery enquiries.
Rietschle OEM reference: 523879
VacAir reference: VA523879
Quantity required: 6 vanes per pump
Vane dimensions: 135 × 37 × 4 mm
Minimum vane height: 27 mm
Material: Carbon
Availability: IN STOCK
ELMO RIETSCHLE DTA 40 REPLACEMENT CARBON VANES
Keep your Rietschle DTA 40 compressor operating with replacement carbon vanes from VacAir Superstore. We supply specialist carbon vane replacements to UK industry, maintenance engineers and compressor service companies. Whether a planned service is approaching or replacement carbon is needed after an inspection, our spares department can help customers obtain the correct parts without unnecessary delays.
The DTA 40 uses six carbon vanes measuring 135 × 37 × 4 mm, identified by Rietschle OEM reference 523879 and VacAir reference VA523879. These specifications are important when checking an existing vane against a replacement, particularly where older service records or supplier catalogues contain conflicting part information.
A new DTA 40 vane has a height of 37 mm. The minimum permitted working height is 27 mm, giving maintenance engineers a defined wear measurement for this model. Physical condition is equally important: cracked edges, uneven contact patterns or a vane that cannot move freely may justify replacement before that height is reached.
For a complete DTA 40 service, order six matching replacement vanes. The 523879 master vane page provides the common product specification, while this DTA 40 page identifies the correct quantity and model-specific wear height. This distinction helps purchasing departments avoid relying on generic compatibility information when preparing a maintenance order.
VacAir also supplies Rietschle spare parts and filters. Should inspection reveal mechanical damage or other problems beyond normal vane wear, our pump servicing and repair team can assist.
TECHNICAL INFORMATION
|
DTA 40 VANE FEATURES✓ Replacement carbon vanes for the Rietschle DTA 40
✓ Six matching vanes for a complete DTA 40 replacement
✓ Original dimensions of 135 × 37 × 4 mm
✓ DTA 40 minimum permitted vane height of 27 mm
✓ Rietschle OEM reference 523879 / VacAir VA523879
✓ Available from VacAir’s specialist UK carbon vane stock
|
RIETSCHLE DTA 40 VANE INSPECTION & REPLACEMENT
|
During DTA 40 maintenance, inspect the full set of six carbon vanes and compare the wear across the rotor. This helps distinguish normal progressive carbon wear from a local problem affecting one slot or one part of the compressor’s internal running surface. New DTA 40 vanes measure 135 × 37 × 4 mm. The original height is 37 mm, with a 27 mm minimum permitted height. A vane should not be retained simply because it exceeds the measurement limit if it has cracks, chipped edges or signs of restricted movement. DTA 40 inspection checklist: ✓ Measure the height of all six carbon vanes ✓ Compare wear patterns across the complete set ✓ Inspect running edges and corners for damage ✓ Check for cracks along the vane body ✓ Confirm that each rotor slot is clean and unobstructed ✓ Examine the internal cylinder for scoring ✓ Inspect rotor, shaft and bearing condition ✓ Check inlet filtration and possible contamination ✓ Remove loose carbon debris using appropriate procedures ✓ Investigate signs of overheating or repeated vane damage DTA 40 vane wear limit: New height 37 mm; minimum permitted height 27 mm. Inspect the condition of all six vanes and follow the manufacturer’s service instructions.
|
 |
ELMO RIETSCHLE DTA 40 SPARE PARTS
|
Purchase DTA 40 carbon vanes from VacAir’s dedicated spares department. We stock the 523879 replacement vane, measuring 135 × 37 × 4 mm. A complete DTA 40 change requires six vanes, and ordering the matching set ahead of maintenance helps avoid delays once the compressor has been dismantled. Carbon vane condition is only one part of compressor maintenance. Inlet filtration, bearing condition and internal running surfaces should also be considered, particularly where the removed carbon shows uneven wear or has fractured during operation. VacAir has supplied vacuum pump parts and equipment since 1996. Our team can assist with identifying the correct 523879 vane and discussing additional Rietschle spare parts needed to complete a planned service or address an unexpected fault. ✓ Rietschle 523879 / VacAir VA523879 replacement vanes ✓ Inlet filters and routine maintenance components ✓ Associated Elmo Rietschle pump and compressor spares ✓ Access to specialist servicing and repair support |
 |
DTA 40 VANE FITTING & PUMP SERVICING
The Rietschle DTA 40 requires six 523879 carbon vanes for a complete replacement. VacAir supplies these parts to customers undertaking their own compressor maintenance and can also provide professional engineering assistance when fitting or repairs are required.
Measure the removed vanes against the 27 mm minimum permitted height and inspect the condition of each piece. Before installing new carbon, check the rotor slots for contamination or damage and ensure the replacement vanes can move as intended.
Where a vane has broken or the compressor has suffered repeated failures, investigate the cause rather than fitting another set without inspection. Cylinder scoring, bearing problems, filtration issues and overheating may all require attention before the machine returns to service.
Our primary service is supplying the correct replacement carbon vanes. Customers can purchase the six-vane DTA 40 set without commissioning a repair. If additional assistance is required, VacAir’s OEM-trained engineers can help with fitting, inspection, diagnosis and servicing.
DTA 40 CARBON VANES — UK & WORLDWIDE SUPPLY
|
VacAir supplies Rietschle DTA 40 carbon vanes from our Leeds operation to maintenance teams, engineering contractors and industrial customers across the UK. We stock the 523879 vane and can supply the six required for a complete compressor change. Our spares department also supports customers throughout Europe and overseas. Delivery and collection arrangements can be discussed according to the destination, required quantity and urgency of the order. To help our team identify your requirement, quote DTA 40 and 523879. The correct replacement measures 135 × 37 × 4 mm, with six vanes per compressor and a model-specific minimum permitted height of 27 mm. For prices and delivery information, telephone 0113 2088501 or email sales@vacair-superstore.com. |
 |
WHY BUY RIETSCHLE DTA 40 VANES FROM VACAIR?
|
Since 1996
Vane Supply
|
Technical Help
Part Identification
|
ISO 9001:2015
Quality Management
|
OEM-Trained
Engineers
|
Specialist carbon vane supply since 1996. VacAir has served the industrial vacuum pump and compressor market for decades, supplying replacement carbon vanes to customers who need reliable parts and knowledgeable service. Purchasing DTA 40 vanes from us means dealing with an established supplier familiar with the equipment behind the part number.
523879 DTA 40 carbon vanes held in UK stock. We stock the 135 × 37 × 4 mm replacement vane, identified by Rietschle reference 523879 and VacAir reference VA523879. The DTA 40 requires six vanes, and our spares department can help customers obtain the matching quantity for a complete replacement.
Real product knowledge rather than generic catalogue listings. VacAir supplies vacuum pumps, compressors, filters, carbon vanes and associated spare parts. Our staff understand the importance of correct specifications, especially where different catalogues contain conflicting compatibility information. Customers can discuss their requirements with a specialist rather than relying solely on a search result.
Competitive vane prices supported by our Price Promise. We work to provide replacement carbon vanes at attractive prices, alongside technical knowledge and dependable service. Our published Price Promise terms explain how qualifying comparable offers from other UK suppliers are considered.
Customer satisfaction supported by independent quality audits. VacAir operates within an ISO 9001:2015 quality management system incorporating customer feedback, review and continual improvement. We believe long-term customer confidence should come from accurate information, reliable supply and the way we support our customers.
We do not fabricate product reviews, invent customer ratings or display artificial review scores on our website or provide them to search engines. We have no need to. Our products, expertise and reputation have supported customers across the pump industry for decades.
OEM-trained engineers available when the job requires more than vanes. Customers can buy the six DTA 40 carbon vanes directly from our spares department. If inspection reveals broken carbon, internal damage or an underlying fault, our engineering team can assist with fitting, diagnosis, maintenance and repairs. Technical support is available without making it a condition of buying replacement parts.
Dependable service for customers throughout the UK and overseas. We combine specialist stock, experienced people and ISO 9001:2015 quality management with domestic and international supply. Our aim is to make sourcing the correct DTA 40 replacement vanes straightforward, from the initial enquiry through to delivery and any subsequent technical assistance.
RIETSCHLE DTA 40 CARBON VANE QUESTIONS
Where can I buy Rietschle DTA 40 replacement carbon vanes?
How many carbon vanes are required for a DTA 40?
What dimensions are the DTA 40 carbon vanes?
What is the minimum permitted height for DTA 40 vanes?
Which OEM part number should I order for a DTA 40?
Why might an older parts list show a different DTA 40 vane number?
What should I check before fitting six new DTA 40 vanes?
Can VacAir supply DTA 40 vanes overseas and assist with servicing?
Trust VacAir Superstore for all your vacuum pump needs.
Contact us for replacement vanes, spare parts, vacuum pumps and engineering support.
