Rietschle DTE 6 Replacement Carbon Vanes – 507051
RIETSCHLE DTE 6 REPLACEMENT CARBON VANES
VacAir Superstore stocks and supplies Rietschle DTE 6 replacement carbon vanes for dry-running rotary vane compressor maintenance. These carbon vanes are identified by OEM part number 507051, measure 40 × 15 × 3 mm and are fitted in a quantity of four vanes per compressor. The DTE 6 has a minimum permitted vane height of 10 mm. With specialist replacement vane experience dating back to 1996, VacAir provides UK stock, competitive pricing and knowledgeable assistance to industrial maintenance teams, engineers and purchasing departments.
Rietschle OEM reference: 507051
Extended OEM reference: 5070510000
VacAir reference: VA507051
Quantity required: 4 vanes
Dimensions: 40 × 15 × 3 mm
Minimum vane height: 10 mm
Material: Carbon
Availability: IN STOCK
ELMO RIETSCHLE DTE 6 REPLACEMENT CARBON VANES
VacAir Superstore stocks Rietschle DTE 6 replacement carbon vanes for industrial dry-running compressor applications. Identified by OEM reference 507051, these replacement components are supplied to engineers, compressor service companies and industrial maintenance departments requiring the correct carbon vanes for planned servicing or urgent repairs.
The Rietschle DTE 6 uses four carbon vanes, each measuring 40 × 15 × 3 mm. The vanes operate within the rotor slots and are subject to gradual wear during normal running. Keeping them within the manufacturer’s permitted dimensions is important to maintaining compressor performance and reducing the risk of damage associated with excessively worn or fractured carbon.
For this particular compressor, the minimum permitted vane height is 10 mm, compared with an original height of 15 mm. All four vanes should be measured and examined during maintenance. Uneven wear, chipping or restricted movement should prompt further inspection of the rotor slots and internal running surfaces before a replacement set is fitted.
Rietschle part number 507051 is shared by several related machines, including the VTE 6, TL 3 and TR 3. Although the vane dimensions and four-piece quantity are common across these applications, the information on this page is specifically for the DTE 6 compressor. VacAir can assist customers ordering from the machine model, OEM number or existing vane dimensions.
VacAir also supplies Elmo Rietschle spare parts and filtration components. If vane inspection reveals internal damage or unusual operating conditions, our vacuum pump and compressor servicing team can provide additional technical and engineering support.
TECHNICAL INFORMATION
|
DTE 6 VANE FEATURES✓ Carbon vanes for the Rietschle DTE 6 compressor
✓ Primary Rietschle OEM reference 507051
✓ Precisely specified 40 × 15 × 3 mm dimensions
✓ Four matching vanes for a complete replacement
✓ DTE 6 minimum permitted height of 10 mm
✓ UK stock and experienced VacAir technical support
|
RIETSCHLE DTE 6 VANE INSPECTION & REPLACEMENT
|
The Rietschle DTE 6 compressor relies on four carbon vanes that move within the rotor slots during operation. Their condition should be checked during scheduled maintenance, especially where there has been a change in compressor output, unusual noise or evidence of carbon debris. Excessive wear or fractured vanes can indicate that further internal inspection is necessary. Each new 507051 vane measures 40 × 15 × 3 mm, with an original height of 15 mm. The minimum permitted DTE 6 vane height is 10 mm. All four components should be measured individually and inspected for damage. When replacement is required, fit a complete set of four rather than mixing new and worn vanes. DTE 6 inspection checklist: ✓ Measure all four vanes against the 10 mm wear limit ✓ Examine vane tips and running edges for damage ✓ Look for cracks, chips or broken carbon fragments ✓ Check each vane moves freely within its rotor slot ✓ Inspect rotor slots for carbon deposits or obstruction ✓ Check internal running surfaces for scoring ✓ Assess rotor and shaft condition ✓ Check bearings for excessive movement ✓ Examine inlet filtration for dirt or restriction ✓ Investigate overheating or uneven wear before reassembly DTE 6 wear limit: New vane height 15 mm; minimum permitted height 10 mm. A full replacement requires four Rietschle 507051 carbon vanes.
|
|
ELMO RIETSCHLE DTE 6 SPARE PARTS
|
VacAir supplies Rietschle 507051 replacement carbon vanes for the DTE 6 compressor. Measuring 40 × 15 × 3 mm, these vanes are supplied for a machine requiring four carbon components per complete change. The extended OEM reference 5070510000 may also be found in maintenance or parts records. The DTE 6 shares this vane specification with the VTE 6, TL 3 and TR 3 models. This common part number is useful for engineers maintaining several Rietschle machines, but the correct maintenance instructions and wear limits should always be checked for the individual model. For the DTE 6, the minimum permitted vane height is 10 mm. VacAir’s spares expertise extends beyond replacement carbon. We can assist with inlet filters and other Rietschle maintenance components, particularly when a compressor inspection reveals contamination, abnormal wear or internal damage. Ordering the right vanes and investigating associated problems helps maintenance departments avoid repeated dismantling and unexpected downtime. ✓ Rietschle 507051 replacement carbon vanes ✓ Four-vane replacement quantity for DTE 6 ✓ Inlet filtration and related compressor spares ✓ Experienced assistance with Rietschle part identification |
 |
DTE 6 VANE FITTING & PUMP SERVICING
Maintaining the Rietschle DTE 6 involves checking the condition of the four carbon vanes and the components against which they operate. As the vanes wear, their height gradually reduces from the original 15 mm. For this compressor, the minimum permitted height is 10 mm.
During a vane change, engineers should check the rotor slots for free movement, inspect the internal running surfaces for scoring and remove loose carbon debris. A fractured vane or markedly uneven wear pattern should prompt further investigation before new components are installed. Inlet filtration, rotor condition and bearings may all be relevant to diagnosing an abnormal failure.
We recommend replacing all four 507051 carbon vanes together rather than fitting individual new vanes alongside worn components. Correct installation, vane orientation and reassembly should follow the manufacturer’s service instructions for the DTE 6 compressor.
VacAir specialises first and foremost in stocking and selling replacement carbon vanes. Customers with in-house engineers can purchase the complete four-vane set without additional services. For businesses requiring practical assistance, our OEM-trained engineers can provide vane fitting, fault investigation, servicing and repairs.
DTE 6 CARBON VANES — UK & WORLDWIDE SUPPLY
|
From our base in Leeds, VacAir supplies Rietschle DTE 6 carbon vanes to industrial businesses, engineering contractors and compressor maintenance teams across the United Kingdom. We stock the 507051 replacement vane and understand the importance of obtaining the correct four-piece quantity when maintenance work is scheduled. VacAir also arranges supply across Europe and worldwide. Customers include manufacturers, resellers, equipment service providers and industrial end users. Our experience in replacement vane distribution allows us to discuss suitable delivery arrangements, including urgent requirements and planned maintenance purchasing. When requesting a quotation, provide the DTE 6 model name and OEM reference 507051. The vane measures 40 × 15 × 3 mm, and four are required per compressor. Our team can also help with related Rietschle spare parts and technical questions. For prices, despatch enquiries or international delivery assistance, telephone 0113 2088501 or email sales@vacair-superstore.com. |
|
WHY BUY RIETSCHLE DTE 6 VANES FROM VACAIR?
|
Since 1996
Vane Supply
|
Technical Help
Part Identification
|
ISO 9001:2015
Quality Management
|
OEM-Trained
Engineers
|
Decades of specialist carbon vane supply. VacAir has been supplying replacement vanes for industrial vacuum pumps and compressors since 1996. We have built our business around helping customers obtain the correct components, whether they are maintaining large production equipment or compact dry-running compressors such as the Rietschle DTE 6. We understand that accurate part identification and dependable supply can be as important as the price of the replacement vane itself.
UK stock and correct replacement quantities. The DTE 6 uses four 507051 carbon vanes, each measuring 40 × 15 × 3 mm. VacAir stocks these components and can assist customers purchasing a complete replacement quantity. Clear identification of the model, OEM number and vane dimensions helps prevent ordering mistakes and unnecessary delays when engineers are ready to undertake maintenance.
Specialist product knowledge rather than a generic catalogue. Our team works with carbon vanes, vacuum pumps, compressors, filters and industrial spare parts every day. We recognise that the same 507051 vane is used in the DTE 6, VTE 6, TL 3 and TR 3, while maintenance requirements must still be considered for each individual machine. For the DTE 6, the minimum permitted vane height is 10 mm. This model-specific knowledge helps customers identify the correct replacement and make informed maintenance decisions.
Competitive pricing supported by our Price Promise. We believe specialist technical support and good value should go together. VacAir aims to provide replacement carbon vanes at competitive prices, with a published Price Promise covering qualifying like-for-like UK replacement vane quotations. Our approach is straightforward: supply the correct vane at the right price and provide knowledgeable assistance when customers need it.
Externally audited ISO 9001:2015 quality management. VacAir operates within a certified quality management system focused on consistent processes, customer satisfaction and continual improvement. We seek genuine customer feedback to assess our performance and help identify where our service can be improved. Accurate technical information, responsible communication and reliable customer support are important elements of the standards we work to maintain.
We do not fabricate product reviews, invent customer ratings or display artificial review scores on our website or provide them to search engines. We have no need to. Our products, expertise and reputation have supported customers across the pump industry for decades.
OEM-trained engineers with practical compressor experience. VacAir is more than a business listing replacement part numbers. Our engineering team can assist when premature carbon vane wear, damaged rotor slots, internal scoring or compressor performance problems require investigation. Customers can purchase DTE 6 replacement vanes for their own engineers to fit, while separate servicing, fitting and repair support is available for those who need it.
Established UK supplier with international reach. VacAir supports manufacturing businesses, maintenance departments, specialist service contractors and resellers throughout the UK, Europe and worldwide. By combining stock, technical expertise, competitive pricing and ISO 9001:2015 quality management, we provide customers with a dependable source for Rietschle replacement carbon vanes and related industrial equipment spares.
RIETSCHLE DTE 6 CARBON VANE QUESTIONS
Where can I buy Rietschle DTE 6 replacement carbon vanes?
What is the OEM part number for DTE 6 vanes?
How many carbon vanes does a Rietschle DTE 6 require?
What are the dimensions of Rietschle DTE 6 vanes?
What is the minimum permitted DTE 6 vane height?
Which other Rietschle models use 507051 carbon vanes?
What should I check before fitting new DTE 6 vanes?
Can VacAir supply DTE 6 carbon vanes internationally and provide servicing?
Trust VacAir Superstore for all your vacuum pump needs.
Contact us for replacement vanes, spare parts, vacuum pumps and engineering support.
