Rietschle DTR 100 Replacement Carbon Vanes – 529267 / 529268
RIETSCHLE DTR 100 REPLACEMENT CARBON VANES
VacAir Superstore stocks and supplies Rietschle DTR 100 replacement carbon vanes for dry-running rotary vane compressor maintenance. Identified by OEM references 529267 and 529268, these carbon vanes measure 245 × 52 × 4 mm. The DTR 100 requires seven vanes for a complete replacement, with a 26 mm minimum permitted vane height. Our UK vane stock and specialist pump industry knowledge support planned servicing, replacement parts purchasing and urgent maintenance requirements.
Rietschle OEM reference: 529267
Alternative OEM reference: 529268
VacAir reference: VA529267
Quantity required: 7 vanes
Dimensions: 245 × 52 × 4 mm
Minimum vane height: 26 mm
Material: Carbon
Availability: IN STOCK
ELMO RIETSCHLE DTR 100 REPLACEMENT CARBON VANES
VacAir Superstore stocks, supplies and sells replacement carbon vanes for the Elmo Rietschle DTR 100. These are the 245 × 52 × 4 mm carbon vanes identified by Rietschle part numbers 529267 and 529268, supplied to compressor service businesses, engineering departments and industrial operators responsible for keeping their equipment operational.
The DTR 100 uses a seven-vane rotor, with each carbon vane sliding within its individual slot as the compressor operates. At 245 mm long, the DTR 100 vane is substantially larger than the components used in many smaller Rietschle models. Correct identification of the dimensions, OEM reference and quantity is particularly important when arranging a replacement set for maintenance.
A new DTR 100 vane has a height of 52 mm. The specified minimum permitted height is 26 mm, so engineers should measure the remaining height of each vane during inspection and consider its condition alongside the dimensional limit. Cracks, damaged edges or unusual wear patterns may justify replacement before a vane reaches the minimum height.
Rietschle references 529267 and 529268 relate to the same replacement vane specification. These vanes are also used in DTR 140, KTR 100, KTR 140, VTR 100 and VTR 140 models. However, their rotor arrangements differ: DTR and KTR models require seven vanes, whereas the VTR models require four. For the DTR 100, a complete replacement therefore consists of seven matching carbon vanes.
VacAir can also assist with Elmo Rietschle spare parts and filters, alongside professional compressor servicing and repairs when a machine requires more than a routine vane change.
TECHNICAL INFORMATION
|
DTR 100 VANE FEATURES✓ Replacement carbon vanes for Rietschle DTR 100
✓ OEM references 529267 and 529268
✓ 245 × 52 × 4 mm vane dimensions
✓ Seven vanes for a complete DTR 100 replacement
✓ 26 mm minimum permitted vane height
✓ UK stock with specialist technical support
|
RIETSCHLE DTR 100 VANE INSPECTION & REPLACEMENT
|
The DTR 100’s seven large carbon vanes should be assessed individually during maintenance. Their remaining height is important, but the pattern of wear across the complete set can also provide useful information about the condition of the compressor’s internal running surfaces and rotor assembly. Each 529267 / 529268 vane measures 245 × 52 × 4 mm when new. The original height is 52 mm, and the minimum permitted height for the DTR 100 is 26 mm. Inspect for uneven wear along the vane length, fractured corners, surface damage or any indication that a vane has not been moving freely within its slot. DTR 100 inspection checklist: ✓ Measure the remaining height of all seven vanes ✓ Compare measurements with the 26 mm minimum ✓ Check for wear differences along each 245 mm vane ✓ Examine edges and corners for fractures ✓ Inspect rotor slots for deposits or damage ✓ Confirm unrestricted movement of each vane ✓ Check the internal running surfaces for scoring ✓ Examine rotor and shaft condition ✓ Assess bearings for excessive movement ✓ Check inlet filtration and contamination DTR 100 vane wear limit: New vane height 52 mm; minimum permitted height 26 mm. A complete change requires seven 529267 / 529268 carbon vanes.
|
|
ELMO RIETSCHLE DTR 100 SPARE PARTS
|
VacAir supplies DTR 100 replacement carbon vanes from UK stock, together with access to other Elmo Rietschle maintenance components. The carbon vane is identified by OEM references 529267 and 529268, with VacAir reference VA529267. A complete DTR 100 change requires seven vanes measuring 245 × 52 × 4 mm. For purchasing departments managing Rietschle spare parts, these two OEM references are particularly useful. They relate to the same replacement vane specification, so either number can help identify the correct component. It is still important to quote the machine model, especially when ordering enough vanes for a complete service. The DTR 100 shares this carbon vane with the DTR 140, KTR 100 and KTR 140, all of which require seven vanes. The VTR 100 and VTR 140 use the same individual vane but require only four. This difference matters when consolidating parts orders for several machines or preparing replacement sets for engineers working at different sites. Carbon vane wear may also indicate a need to examine other components. During DTR 100 maintenance, inspect filtration, rotor slots, bearings and internal running surfaces. If a vane has fractured, loose carbon fragments and possible internal damage should be addressed before fitting new parts. VacAir can assist with associated Rietschle filters, maintenance spares and technical enquiries. Our experience with industrial vacuum pumps and compressors helps customers establish which parts are required for straightforward servicing and which situations may need more extensive mechanical attention. ✓ DTR 100 replacement carbon vanes, 529267 / 529268 ✓ Correct seven-vane replacement quantity ✓ Rietschle filtration and maintenance components ✓ Specialist spare parts identification and support |
 |
DTR 100 VANE FITTING & PUMP SERVICING
Servicing a DTR 100 provides an opportunity to inspect the condition of its seven-vane rotor arrangement. Because each carbon vane is 245 mm long, engineers should examine wear across the full length of the component, not simply measure one convenient point and assume the remaining surfaces are in the same condition.
The replacement 529267 / 529268 vane has a new height of 52 mm, while the DTR 100’s minimum permitted height is 26 mm. Measure each of the seven removed vanes and look for differences in wear between positions. Chips, cracks, abnormal polishing or significant variation along a vane may indicate a problem requiring further investigation.
Before dismantling, isolate the compressor and follow the manufacturer’s maintenance procedure. Once accessible, inspect the rotor slots for carbon deposits, damage and restricted movement. Check the internal running surfaces for scoring and examine the rotor and bearings for indications of mechanical wear.
Filtration condition also deserves attention. Contamination entering a dry-running compressor can contribute to abnormal wear, while fractured carbon can leave fragments within the machine. The underlying cause of a damaged vane should be investigated rather than fitting a new set without checking the surrounding components.
When replacement is required, fit seven matching 245 × 52 × 4 mm carbon vanes in accordance with the manufacturer’s specified procedure and orientation. VacAir supplies the components to customers undertaking their own servicing, and our OEM-trained engineers can provide fitting, fault diagnosis and repair assistance where required.
DTR 100 CARBON VANES — UK & WORLDWIDE SUPPLY
|
VacAir supplies Rietschle DTR 100 carbon vanes from UK stock to industrial operators, engineering contractors, specialist pump repair companies and maintenance departments. We understand that sourcing the correct seven-vane set is often one part of a wider maintenance schedule, particularly where the compressor is used in a production environment. Our supply service also extends to customers across Europe and worldwide. We can discuss delivery arrangements for planned servicing and urgent replacement requirements, including the information needed for international consignments. When requesting a quotation, identify the machine as a Rietschle DTR 100 and quote 529267 or 529268. The replacement vane measures 245 × 52 × 4 mm, and seven are required. Supplying the model and OEM reference together helps distinguish the correct seven-vane requirement from VTR models using the same component in sets of four. VacAir has supplied replacement carbon vanes since 1996, combining competitive prices with experienced technical assistance. Customers can speak directly with our team about vane identification, additional spare parts, delivery arrangements and engineering support rather than relying solely on a catalogue listing. For DTR 100 pricing and delivery: Call 0113 2088501 or email sales@vacair-superstore.com. |
|
WHY BUY RIETSCHLE DTR 100 VANES FROM VACAIR?
|
Since 1996
Vane Supply
|
Technical Help
Part Identification
|
ISO 9001:2015
Quality Management
|
OEM-Trained
Engineers
|
Established specialists in replacement carbon vanes since 1996. VacAir has supplied industrial vacuum pump and compressor vanes for decades, supporting manufacturers, OEMs, engineering businesses, distributors and maintenance departments. Our experience includes understanding the differences between machines that share individual vane specifications but require different quantities. For customers sourcing DTR 100 components, this means dealing with a specialist familiar with the equipment rather than a general parts catalogue.
Correct DTR 100 vanes available from UK stock. We stock the 529267 / 529268 replacement carbon vane, measuring 245 × 52 × 4 mm. A DTR 100 requires seven vanes. The same carbon component is used in the DTR 140, KTR 100, KTR 140, VTR 100 and VTR 140, but the VTR machines take only four. Our product identification knowledge helps ensure customers receive the appropriate quantity for the compressor being maintained.
Practical knowledge of dry-running rotary vane equipment. VacAir’s expertise covers replacement carbon vanes, vacuum pumps, compressors, filters, spare parts and engineering services. The DTR 100’s 245 mm vane length and seven-slot rotor arrangement make careful inspection important. We understand the significance of the 26 mm minimum permitted vane height, uneven wear along the vane, restricted movement in rotor slots and damage to internal running surfaces. Our team can help customers assess the implications of abnormal wear rather than simply matching a part number.
Competitive replacement vane pricing and our Price Promise. VacAir aims to offer excellent value on carbon vanes while retaining the reassurance of specialist technical support. Our published Price Promise explains the conditions under which qualifying like-for-like prices from UK competitors may be matched. Customers can raise a comparison when requesting their quotation. We believe accurate product identification, competitive pricing and responsive customer service should be available together.
Externally audited ISO 9001:2015 quality management. VacAir operates within a certified quality management system supporting consistent processes, customer satisfaction and continual improvement. We value accurate product information, clear communication and genuine feedback from the businesses we supply. These principles help guide our replacement parts business and the engineering services available to customers.
We do not fabricate product reviews, invent customer ratings or display artificial review scores on our website or provide them to search engines. We have no need to. Our products, expertise and reputation have supported customers across the pump industry for decades.
OEM-trained engineering support when needed. Customers with their own maintenance engineers can obtain seven replacement DTR 100 vanes directly from VacAir. Where a machine has suffered a fractured vane, internal scoring or an uncertain mechanical fault, our OEM-trained engineers can assist with vane fitting, servicing, fault diagnosis and repairs. This support is available separately and is not a requirement for purchasing replacement components.
UK, European and worldwide supply. VacAir supports industrial businesses in Britain and overseas with replacement vanes, pump spares and technical assistance. Our established stockholding, decades of experience, competitive prices and ISO 9001:2015 quality management make us a dependable source for planned DTR 100 servicing and unexpected maintenance requirements.
RIETSCHLE DTR 100 CARBON VANE QUESTIONS
Where can I buy Rietschle DTR 100 replacement carbon vanes?
Which OEM part numbers identify the DTR 100 carbon vane?
How many vanes does a Rietschle DTR 100 require?
What are the dimensions of DTR 100 carbon vanes?
What is the minimum permitted DTR 100 vane height?
Do DTR 100 and DTR 140 compressors use the same carbon vanes?
Why do VTR 100 and VTR 140 pumps need only four of the same vanes?
What should be checked if a DTR 100 carbon vane fractures?
Can VacAir supply DTR 100 vanes internationally and provide fitting assistance?
Trust VacAir Superstore for all your vacuum pump needs.
Contact us for replacement vanes, spare parts, vacuum pumps and engineering support.
