Rietschle TR 80DV Replacement Carbon Vanes – 514870
RIETSCHLE TR 80DV REPLACEMENT CARBON VANES
VacAir Superstore supplies replacement carbon vanes for the Elmo Rietschle TR 80DV dry-running rotary vane pump. Our 514870 / 526311 replacement vanes are suitable for routine maintenance, planned servicing and urgent pump repairs. A complete TR 80DV replacement requires six vanes.
Rietschle OEM reference: 514870
Alternative OEM reference: 526311
VacAir reference: VA514870 / VA526311
Quantity required: 6 vanes per pump
Vane dimensions: 95 × 59 × 6 mm
Minimum vane height: 45 mm
Material: Carbon
Availability: In stock
NEED TR 80DV VANES URGENTLY?
Contact VacAir for TR 80DV carbon vanes, assistance identifying the correct six-vane replacement set and urgent delivery options.
Call: 0113 2088501
ELMO RIETSCHLE TR 80DV REPLACEMENT CARBON VANES
VacAir Superstore supplies replacement carbon vanes for the Elmo Rietschle TR 80DV dry-running rotary vane pump. Whether replacing vanes during a scheduled maintenance shutdown or obtaining components for an urgent repair, VacAir provides the correct replacement specification with experienced technical support.
The TR 80DV requires six carbon vanes, each measuring 95 × 59 × 6 mm. These correspond to Rietschle OEM reference 514870, also cross-referenced as 526311. VacAir replacement references are VA514870 and VA526311. Our team can assist with confirming the part number, pump model and correct quantity before ordering.
During operation, carbon vanes slide within the rotor slots and maintain contact with the internal running surface. Their height gradually reduces as part of normal operation. New TR 80DV vanes measure 59 mm high, with a specified minimum permitted height of 45 mm. Routine inspections help maintenance engineers establish when replacement is required and identify any abnormal wear or damage.
An important distinction exists between the TR 80DV and TR 80DVV. Both use the same 514870 / 526311 vane dimensions, but the TR 80DV requires six vanes, whereas the TR 80DVV requires seven. The TR 80D and TR 80V also use six, while the listed TR 81 variants use seven. Checking the complete model designation is therefore essential when ordering a replacement set.
VacAir also supplies Elmo Rietschle spare parts and offers vacuum pump servicing and repairs for customers requiring additional maintenance or engineering support.
TECHNICAL INFORMATION
|
TR 80DV VANE FEATURES✓Replacement carbon vanes for the TR 80DV
✓Six vanes for a complete replacement set
✓95 × 59 × 6 mm carbon vane dimensions
✓45 mm minimum permitted vane height
✓Cross-referenced to OEM 514870 / 526311
✓VacAir technical and engineering assistance
|
RIETSCHLE TR 80DV VANE INSPECTION & REPLACEMENT
|
Routine inspection of the six carbon vanes fitted to the Rietschle TR 80DV helps engineers assess the pump’s condition and plan replacement before vane wear becomes excessive. The height of each vane gradually decreases during normal use, but wear should be reasonably consistent across the complete set. Significant differences may indicate restricted movement, contamination or other internal problems. New 514870 / 526311 carbon vanes measure 95 × 59 × 6 mm, with an original height of 59 mm. The specified minimum permitted height for the TR 80DV is 45 mm. Height measurements should be accompanied by checks for cracks, chipped edges, surface damage and unusual wear patterns. A damaged vane may require replacement before reaching the minimum height. TR 80DV maintenance inspection checklist: ✓ Measure the height of all six carbon vanes ✓ Inspect vane edges and faces for cracks or chips ✓ Confirm free movement within the rotor slots ✓ Examine cylinder running surfaces for scoring ✓ Inspect the rotor and shaft for damage ✓ Check bearings for excessive wear or movement ✓ Assess inlet filter condition and carbon dust accumulation ✓ Look for contamination or evidence of overheating ✓ Investigate broken vanes or uneven wear before replacement TR 80DV minimum vane height: New vanes measure 59 mm high, with a minimum permitted height of 45 mm. Replace worn vanes as a complete set of six, following the manufacturer’s maintenance instructions. Check for internal damage before fitting new components.
|
General carbon vane installation and maintenance illustration.
|
ELMO RIETSCHLE TR 80DV SPARE PARTS
|
VacAir supplies Rietschle TR 80DV replacement carbon vanes and vacuum pump spare parts for scheduled maintenance, equipment servicing and breakdown repairs. Our customers include industrial maintenance teams, engineering contractors and specialist vacuum pump service companies requiring accurately identified replacement components. When fitting a complete set of six vanes, it is sensible to assess the condition of other components that influence vane wear. Inlet filtration, rotor slots, cylinder running surfaces and bearings should be inspected. Where existing vanes have fractured or worn prematurely, further investigation may be required to identify the cause and avoid damage to the replacement set. VacAir has supplied carbon vanes, filters and vacuum pump spare parts since 1996. Our team can help identify TR 80DV components using Rietschle references 514870 and 526311, the pump model or existing vane dimensions. For other spare parts, providing the pump serial number can assist with accurate identification. ✓ Rietschle 514870 / 526311 replacement carbon vanes ✓ Inlet filters and routine maintenance components ✓ Spare parts for pump servicing and repairs ✓ Technical assistance identifying replacement components |
 |
TR 80DV VANE FITTING & PUMP SERVICING
VacAir supplies the six Rietschle 514870 / 526311 carbon vanes required for a complete TR 80DV replacement. Customers can purchase the correct vane specification for their own maintenance work or contact VacAir for professional fitting and vacuum pump servicing.
Before new vanes are installed, the existing components should be inspected and measured against the 45 mm minimum permitted height. The rotor slots, internal running surfaces, bearings and inlet filtration should also be examined. These checks help identify any additional wear or damage that could affect the replacement vanes.
If a TR 80DV has suffered fractured vanes, abnormal noise or reduced performance, the underlying cause should be investigated. Restricted vane movement, contamination, damaged cylinder surfaces and mechanical wear can all contribute to premature failure. Replacing the carbon vanes without addressing such problems may result in further damage.
VacAir’s OEM factory-trained engineers offer vane fitting, preventative maintenance, fault diagnosis and vacuum pump repairs. Our engineering experience supports customers who require replacement components alone as well as those seeking a more comprehensive assessment of their equipment.
TR 80DV CARBON VANES — UK & WORLDWIDE SUPPLY
|
VacAir supplies Elmo Rietschle TR 80DV replacement carbon vanes from Leeds, West Yorkshire, supporting manufacturers, maintenance departments, distributors and vacuum pump engineers requiring replacement components for industrial equipment. Our supply service covers the United Kingdom, Europe and worldwide destinations. Depending on requirements and location, we can discuss express courier delivery, collection from our Leeds trade counter and urgent delivery arrangements where available. Prompt access to the correct replacement vanes helps customers organise servicing and minimise avoidable maintenance delays. For accurate identification, quote TR 80DV, Rietschle OEM reference 514870 or alternative reference 526311. The TR 80DV requires six carbon vanes measuring 95 × 59 × 6 mm. Please check the model carefully, as the similarly named TR 80DVV uses seven vanes. If replacement vanes are required urgently, call 0113 2088501 to discuss component identification, available delivery options and technical assistance. |
|
WHY BUY RIETSCHLE TR 80DV VANES FROM VACAIR?
|
Since 1996
Vane Supply
|
Technical Help
Part Identification
|
ISO 9001:2015
Quality Management
|
OEM-Trained
Engineers
|
Established replacement vane supplier. VacAir has supplied carbon vanes and vacuum pump spare parts since 1996. We support industrial users, manufacturers, distributors and engineers working with Elmo Rietschle, Becker, Busch, DVP and other vacuum pump brands.
Accurate TR 80DV vane identification. We supply carbon vanes corresponding to Rietschle OEM 514870 / 526311, measuring 95 × 59 × 6 mm. Our team understands the difference between the six-vane TR 80DV and seven-vane TR 80DVV, helping customers establish the correct quantity for their equipment.
Replacement vanes available from stock. VacAir holds an extensive range of carbon vanes for dry-running rotary vane pumps. We supply customers carrying out planned maintenance, preventative servicing and urgent repairs, with replacement components available for a wide range of industrial applications.
Knowledgeable technical assistance. Our team can cross-reference OEM numbers, check vane dimensions and assist with model identification. This is particularly useful when equipment nameplates are difficult to read or similar pump variants require different numbers of otherwise identical vanes.
Engineering support and servicing. VacAir’s OEM factory-trained engineers provide professional vane fitting, vacuum pump servicing, fault diagnosis and repairs. This practical engineering experience supports customers dealing with worn vanes, premature failures or damage to internal pump components.
UK and international supply. We serve manufacturers, maintenance departments, engineering companies and distributors across the UK, Europe and worldwide. Whether you need six TR 80DV vanes for a scheduled service or replacement components following a breakdown, our team can discuss suitable delivery arrangements.
RIETSCHLE TR 80DV CARBON VANE QUESTIONS
Where can I buy Rietschle TR 80DV replacement carbon vanes?
How many carbon vanes are fitted to a Rietschle TR 80DV?
What are the dimensions of TR 80DV carbon vanes?
What is the minimum permitted vane height for the TR 80DV?
Are Rietschle 514870 and 526311 the same carbon vane?
What is the difference between TR 80DV and TR 80DVV vane requirements?
Should all six TR 80DV vanes be replaced together?
Can VacAir supply TR 80DV vanes urgently and provide fitting?
Trust VacAir Superstore for all your vacuum pump needs.
Contact us for replacement vanes, spare parts, vacuum pumps and engineering support.
