Rietschle TR 80V Replacement Carbon Vanes – 514870
RIETSCHLE TR 80V REPLACEMENT CARBON VANES
VacAir Superstore supplies replacement carbon vanes for the Elmo Rietschle TR 80V dry-running rotary vane pump. Our 514870 / 526311 replacement vanes measure 95 × 59 × 6 mm, with six vanes required per pump. Available for routine servicing, preventative maintenance and urgent repairs.
Rietschle OEM reference: 514870
Alternative OEM reference: 526311
VacAir reference: VA514870 / VA526311
Quantity required: 6 vanes per pump
Vane dimensions: 95 × 59 × 6 mm
Minimum vane height: 45 mm
Material: Carbon
Availability: In stock
NEED TR 80V VANES URGENTLY?
Contact VacAir for TR 80V replacement carbon vanes, technical assistance identifying the correct six-vane set and urgent delivery arrangements.
Call: 0113 2088501
ELMO RIETSCHLE TR 80V REPLACEMENT CARBON VANES
VacAir Superstore supplies replacement carbon vanes for the Elmo Rietschle TR 80V dry-running rotary vane pump. We support industrial users, engineering contractors and maintenance departments requiring correctly identified carbon vanes for planned servicing, routine replacement and urgent pump repairs.
The Rietschle TR 80V requires six carbon vanes, each measuring 95 × 59 × 6 mm. The replacement vane corresponds to Rietschle OEM reference 514870, with 526311 as an alternative reference. VacAir replacement codes are VA514870 and VA526311. Our technical team can help confirm the correct part number and replacement quantity before ordering.
Carbon vanes slide within the pump rotor slots and form the working chambers during operation. As the vanes move against the internal running surface, their height gradually reduces. New TR 80V vanes measure 59 mm high, with a specified minimum permitted height of 45 mm. Monitoring vane condition during maintenance helps identify when replacement is required and whether additional pump components need attention.
Several Rietschle TR 80 and TR 81 pumps share this vane specification, but their set quantities differ. The TR 80V, TR 80D and TR 80DV each require six vanes, while the TR 80DVV, TR 81 and TR 81DVV require seven. When purchasing replacement vanes, the complete pump model should therefore be checked rather than relying solely on the shared OEM number.
For additional maintenance requirements, VacAir supplies Elmo Rietschle spare parts and offers vacuum pump servicing and repairs.
TECHNICAL INFORMATION
|
TR 80V VANE FEATURES✓Replacement carbon vanes for the TR 80V
✓Six vanes for a complete replacement set
✓95 × 59 × 6 mm vane dimensions
✓45 mm minimum permitted vane height
✓OEM references 514870 and 526311
✓VacAir technical identification and support
|
RIETSCHLE TR 80V VANE INSPECTION & REPLACEMENT
|
The six carbon vanes fitted to the Rietschle TR 80V should be inspected at the manufacturer’s recommended service intervals. Measuring the remaining vane height and examining their physical condition allows engineers to identify normal wear, damaged components and potential problems within the pump before a new set is installed. New Rietschle 514870 / 526311 vanes measure 95 × 59 × 6 mm, with an original height of 59 mm. The minimum permitted height for the TR 80V is 45 mm. In addition to measuring height, inspect each vane for cracks, chipped edges, uneven wear and evidence of restricted movement within the rotor slots. TR 80V maintenance inspection checklist: ✓ Measure the remaining height of all six vanes ✓ Inspect vane edges and faces for damage ✓ Check that the vanes move freely in the rotor slots ✓ Examine the cylinder running surface for scoring ✓ Inspect the rotor and shaft condition ✓ Check bearings for excessive movement or wear ✓ Examine inlet filtration and carbon dust accumulation ✓ Look for contamination or evidence of overheating ✓ Investigate fractured vanes or unusual wear patterns TR 80V minimum vane height: New vanes are 59 mm high, with a minimum permitted height of 45 mm. Replace worn vanes as a complete set of six, following the manufacturer’s maintenance instructions. Investigate any abnormal wear or internal damage before fitting replacements.
|
General carbon vane installation and maintenance illustration.
|
ELMO RIETSCHLE TR 80V SPARE PARTS
|
VacAir supplies Rietschle TR 80V replacement carbon vanes and vacuum pump spare parts for planned maintenance, industrial servicing and repair work. We help customers source the correct six-vane replacement quantity and identify other components needed to maintain the pump. When changing carbon vanes, maintenance engineers should also examine the inlet filter, bearings, rotor slots and internal running surfaces. Contamination or mechanical wear can affect vane movement and contribute to premature failure. If the previous vanes have fractured or worn unevenly, the underlying cause should be investigated before installing replacements. Since 1996, VacAir has supplied carbon vanes, filters and vacuum pump spare parts to manufacturers, industrial users, distributors and service companies. Our technical team can help identify TR 80V components using the model designation, Rietschle OEM references 514870 / 526311 or existing vane dimensions. For other spare parts, the pump serial number can also assist identification. ✓ Rietschle 514870 / 526311 carbon vanes ✓ Inlet filters and routine maintenance components ✓ Spare parts for vacuum pump servicing and repairs ✓ Technical assistance identifying replacement parts |
 |
TR 80V VANE FITTING & PUMP SERVICING
VacAir supplies the six Rietschle 514870 / 526311 carbon vanes required for a complete TR 80V replacement. Customers can obtain the correct components for their own maintenance programmes or contact our engineering team for professional vane fitting and vacuum pump servicing.
Before installing a new set, the existing vanes should be measured against the 45 mm minimum permitted height. Engineers should also inspect the rotor slots, cylinder running surfaces, bearings and inlet filtration. These checks help identify conditions that could reduce the service life of the replacement vanes or require further repair work.
If a TR 80V has suffered fractured vanes, abnormal noise or reduced performance, the cause should be established before replacement. Restricted vane movement, contamination, damaged internal surfaces and mechanical wear can all contribute to premature failure. A vane change alone may not resolve an underlying problem within the pump.
VacAir’s OEM factory-trained engineers provide vane fitting, preventative maintenance, fault diagnosis and vacuum pump repairs. We support customers purchasing replacement vanes alone and those requiring experienced engineering assistance to inspect, maintain or repair their equipment.
TR 80V CARBON VANES — UK & WORLDWIDE SUPPLY
|
VacAir supplies Elmo Rietschle TR 80V replacement carbon vanes from Leeds, West Yorkshire, supporting industrial users, manufacturers, distributors and vacuum pump engineers requiring replacement components for their equipment. Our supply service covers the United Kingdom, Europe and worldwide destinations. Depending on the order and delivery location, we can discuss express courier services, collection from our Leeds trade counter and urgent delivery arrangements where available. Having access to correctly identified vanes helps customers plan servicing and respond to unexpected maintenance requirements. For accurate identification, quote TR 80V, Rietschle OEM reference 514870 or alternative reference 526311. The TR 80V requires six carbon vanes, each measuring 95 × 59 × 6 mm. Other models using the same vane may require seven, so confirming the exact pump designation is important. For urgent TR 80V replacement vane requirements, call 0113 2088501 to discuss components, delivery arrangements and technical support. |
 |
WHY BUY RIETSCHLE TR 80V VANES FROM VACAIR?
|
Since 1996
Vane Supply
|
Technical Help
Part Identification
|
ISO 9001:2015
Quality Management
|
OEM-Trained
Engineers
|
Established replacement vane supplier. VacAir has supplied carbon vanes and vacuum pump spare parts since 1996. We support manufacturers, maintenance departments, engineering contractors and distributors working with Rietschle, Becker, Busch, DVP and other vacuum pump brands.
Accurate TR 80V vane identification. We supply replacement carbon vanes corresponding to Rietschle OEM references 514870 and 526311, measuring 95 × 59 × 6 mm. Our team can help establish the correct six-vane quantity and distinguish the TR 80V from related seven-vane models.
Extensive replacement vane stocks. VacAir maintains a broad range of carbon vanes for dry-running rotary vane pumps. We supply components for scheduled servicing, preventative maintenance and urgent repairs, helping industrial customers source the parts they require.
Knowledgeable technical support. Our team can cross-reference OEM numbers, check vane dimensions and assist with pump model identification. This is useful where multiple pump variants share an individual vane specification but require different complete replacement quantities.
Engineering support beyond supply. VacAir’s OEM factory-trained engineers provide vane fitting, vacuum pump servicing, fault diagnosis and repairs. This practical experience supports customers dealing with damaged pumps, abnormal vane wear or unexpected breakdowns.
UK and international supply. We serve manufacturers, distributors, engineering companies and maintenance departments throughout the UK, Europe and worldwide. Whether you require six TR 80V vanes for planned servicing or urgent replacement components, our team can discuss suitable delivery arrangements.
RIETSCHLE TR 80V CARBON VANE QUESTIONS
Where can I buy Rietschle TR 80V replacement carbon vanes?
How many carbon vanes are required for a Rietschle TR 80V?
What are the dimensions of TR 80V replacement vanes?
What is the minimum permitted TR 80V vane height?
Are Rietschle 514870 and 526311 the same replacement vane?
Do TR 80V and TR 80DVV pumps require the same number of vanes?
Should all six TR 80V carbon vanes be replaced together?
Can VacAir supply TR 80V vanes urgently and provide fitting?
Trust VacAir Superstore for all your vacuum pump needs.
Contact us for replacement vanes, spare parts, vacuum pumps and engineering support.
