Busch SV 1080 Replacement Carbon Vanes – 0722000017

BUSCH SV 1080 REPLACEMENT CARBON VANES

VacAir Superstore stocks, supplies and sells replacement carbon vanes for the Busch SV 1080 vacuum pump. We support industrial maintenance departments, engineering contractors and specialist vacuum pump service companies requiring correctly identified replacement vanes for scheduled maintenance or repairs. Our focus is on dependable spare-parts supply backed by people who understand vacuum pumps and their servicing requirements.

The Busch SV 1080 uses four carbon vanes measuring 170 × 44 × 4 mm. The replacement vanes are listed against Busch OEM references 0722000017 and 0722524785, with VacAir references VA722000017 and VA722524785. Correct identification matters when ordering components for established industrial equipment, particularly where maintenance records may contain different historical part references.

Each new vane has an original height of 44 mm and a 33 mm minimum permitted height. During maintenance, all four vanes should be removed, measured and examined along their full 170 mm length. Damage at the running edge, cracking or uneven wear may indicate that replacement is necessary even where the remaining vane height has not yet reached the stated limit.

A successful vane replacement involves more than inserting four new components. The rotor slots must be clean, the vanes must move freely and the cylinder should be checked for scoring or other damage. If an SV 1080 has experienced premature vane failure or reduced vacuum performance, VacAir’s dedicated engineering department can help investigate the pump’s condition and undertake professional servicing or repairs.

VacAir also supplies Busch vacuum pump spare parts and maintenance components. For customers requiring engineering assistance, our Busch pump servicing and repair department provides professional vane fitting, fault investigation and workshop repairs.

BUSCH SV 1080 VANE INSPECTION & REPLACEMENT

The Busch SV 1080 uses four relatively long carbon vanes, making careful examination of the full running surface particularly important during maintenance. Each vane should be removed and inspected individually, with attention given to wear along its 170 mm length. Cracks, damaged corners or irregular wear patterns can provide useful indications of the pump’s internal condition.

The replacement vanes measure 170 × 44 × 4 mm, with an original height of 44 mm and a 33 mm minimum permitted height. Compare all four vanes rather than relying on a single measurement. If a vane is fractured, sticking in its rotor slot or showing unexpected wear, investigate the cause before installing the replacement set.

SV 1080 maintenance inspection checklist:

CORRECT CARBON VANE ORIENTATION Before fitting the four SV 1080 replacement carbon vanes, clean and inspect the rotor slots. The vanes must move freely without binding, and any damage or deposits that could interfere with their movement should be addressed. The higher edge is the leading edge. The chamfer follows behind the leading edge, as shown in the adjacent VacAir fitting diagram. Inspect the cylinder running surface for scoring, and check that no fragments from the previous vanes remain inside the pump. Where unusual wear or breakage has occurred, further mechanical inspection may be necessary before installing new components. Confirm the direction of rotation and follow the manufacturer’s installation instructions. VacAir’s fully trained engineers can provide professional vane fitting, internal inspection and servicing where required.

BUSCH SV 1080 SPARE PARTS

BUSCH SV 1080 VANE FITTING & PUMP SERVICING

VacAir operates its own dedicated vacuum pump service department, with fully trained engineers providing professional vane fitting, routine servicing and mechanical repairs. For Busch SV 1080 pumps, our workshop can replace the four carbon vanes, inspect the internal components and undertake maintenance at highly competitive rates.

Careful examination of the 170 mm replacement vanes. The SV 1080 uses long carbon vanes that should be inspected along their complete running edges. Uneven wear, cracking or damaged corners can indicate that the pump’s cylinder or rotor requires attention. Our engineers can examine the relevant components before new vanes are fitted.

Finding the reason for poor pump performance. A pump that has become noisy, is struggling to achieve its normal vacuum level or has experienced repeated vane damage may require more than a replacement set. VacAir can investigate filtration, internal wear and mechanical condition, then advise on appropriate servicing or repairs rather than assuming that the vanes are the only problem.

Our OEM-trained engineers have practical experience of industrial vacuum pump maintenance. Customers can order the replacement carbon vanes for fitting by their own engineers or arrange for VacAir to carry out the work. We combine specialist parts supply with a dedicated workshop, straightforward advice and professional engineering services at competitive rates.

BUSCH VANE FITTING, SERVICING & REPAIRS →

BUSCH SV 1080 CARBON VANES — UK & WORLDWIDE SUPPLY

WHY BUY BUSCH SV 1080 VANES FROM VACAIR?

Specialists in replacement carbon vanes since 1996. VacAir has supplied vacuum pump vanes and spare parts to industrial customers for decades. We understand the practical pressures of maintaining equipment that businesses depend on, and we focus on helping engineers obtain the correct replacement components with reliable technical assistance.

UK stock of the correct SV 1080 vanes. We stock the 170 × 44 × 4 mm replacement carbon vanes identified by Busch OEM references 0722000017 and 0722524785, with corresponding VacAir references VA722000017 and VA722524785. Our spares team understands that the SV 1080 requires four matching vanes and can arrange the complete replacement quantity.

Experienced vacuum pump specialists, not generic catalogue sellers. Our team works with vacuum pumps, their components and their servicing requirements. We can discuss vane identification, wear measurements, rotor condition and correct fitting with customers who need practical guidance rather than simply a product description.

Competitive prices supported by our Price Promise. VacAir aims to provide replacement carbon vanes at attractive prices while maintaining dependable supply and knowledgeable support. Our published Price Promise sets out the conditions under which we can match a qualifying lower price from another UK supplier for genuinely comparable replacement carbon vanes.

Externally audited ISO 9001:2015 quality management. VacAir operates an ISO 9001:2015 quality management system incorporating customer satisfaction monitoring and continual improvement. Accurate product identification, honest communication and reliable customer service are important parts of how we operate.

We do not fabricate product reviews, invent customer ratings or display artificial review scores on our website or provide them to search engines. Our products, expertise and reputation have supported customers across the vacuum pump industry for decades.

OEM-trained engineers and our own service department. VacAir offers more than replacement carbon vane supply. Our fully trained engineers can fit the four SV 1080 vanes, inspect the cylinder and rotor, investigate abnormal wear and undertake professional servicing or repairs. Our dedicated vacuum pump workshop provides these services at highly competitive rates.

Established reputation and worldwide supply. Whether you are servicing one Busch SV 1080 or managing maintenance across several industrial vacuum pumps, VacAir can assist with part identification, competitive quotations and delivery arrangements. We combine UK vane stock, international supply and decades of specialist experience to help customers obtain the right replacement vanes with confidence.

BUSCH SV 1080 CARBON VANE QUESTIONS