Becker WN124-195 Vanes, 90137200007

IDENTIFYING BECKER VANE WN 124-195

BECKER PUMP COMPATIBILITY

WN 124-195 carbon vanes are used in the following Becker T, VT and DT series dry-running rotary vane pumps. All three models use Becker reference 90137200007 and require a complete set of seven vanes.

REPLACING BECKER WN 124-195 CARBON VANES

VacAir Superstore supplies Becker WN 124-195 replacement carbon vanes for the T 3.60, VT 3.60 and DT 3.60 dry-running rotary vane pumps. These carbon graphite vanes are designed to operate within the pump rotor and gradually wear during normal service. Regular inspection and timely replacement are important to maintaining pump performance and reducing the risk of an unexpected breakdown.

A new WN 124-195 carbon vane measures 115 × 49 × 4 mm, with an original vane height of 49 mm. The specified minimum wear height is 31 mm. During routine maintenance, measure each vane individually and inspect the carbon for cracks, chipped edges, abnormal wear patterns or evidence of overheating. Any significant difference in wear between the vanes should be investigated before the pump is returned to service.

The Becker T 3.60, VT 3.60 and DT 3.60 models listed on this page each require a complete set of seven WN 124-195 vanes, corresponding to Becker OEM part number 90137200007. Replacing all seven together helps avoid mixing components at different stages of wear. If a vane has fractured or become excessively worn, the cylinder running surface, rotor slots and bearings should be inspected before new carbon is fitted.

WN 124-195 maintenance inspection checklist:

CORRECT CARBON VANE ORIENTATION Before fitting Becker WN 124-195 replacement carbon vanes, carefully clean the rotor slots and remove any carbon dust or fragments from the previous set. Each vane must be able to move freely within its slot. Restricted movement can affect pump operation and contribute to premature vane wear or mechanical damage. The higher edge of the vane is the leading edge. The chamfer follows behind the leading edge, as illustrated in the adjacent VacAir fitting diagram. Confirm the vane profile and correct orientation for the particular pump’s direction of rotation before installation. All three compatible Becker models require seven carbon vanes per pump. Check the cylinder running surface, rotor, shaft and bearings before installing the new set. If the previous vanes have broken, worn unevenly or suffered overheating, the underlying cause should be identified rather than simply fitting new vanes. Always follow the relevant Becker manufacturer’s fitting and maintenance instructions. VacAir’s experienced engineers can assist with vane identification, professional fitting, pump servicing and mechanical repairs where required.

UK, EUROPEAN & WORLDWIDE VANE SUPPLY

WHY BUY REPLACEMENT BECKER VANES FROM VACAIR?

Replacement carbon vane specialists since 1996. VacAir has supplied replacement vacuum pump vanes, spare parts and technical assistance to industrial customers for three decades. We support manufacturers, engineering departments, OEMs, distributors and specialist pump service companies that need dependable components, competitive prices and knowledgeable support. Our business is built around understanding vacuum pumps and helping customers maintain them, rather than simply selling parts from a generic catalogue.

Becker WN 124-195 replacement vanes available from UK stock. VacAir stocks the 115 × 49 × 4 mm carbon graphite vane identified by WN 124-195, under our own reference VA901372. The corresponding Becker OEM reference 90137200007 identifies the complete seven-vane set for the T 3.60, VT 3.60 and DT 3.60 pumps. We can help confirm the correct vane specification and quantity, particularly where an older pump is being serviced or the original component reference needs checking.

More than 40 years of combined former Becker UK agent experience. Our senior team brings substantial first-hand knowledge of Becker vacuum pumps, their operation and maintenance requirements. We understand the importance of correct vane selection, rotor condition, cylinder wear and filtration. This specialist knowledge enables us to assist customers with practical questions that a generic catalogue supplier may be unable to answer.

Competitive replacement vane prices and our Price Promise. We work hard to provide high-quality replacement carbon vanes at competitive prices, backed by knowledgeable technical support. Our Price Promise applies to qualifying, genuinely comparable replacement carbon vanes offered by other UK suppliers, subject to our published conditions. Customers can request a competitive quotation while benefiting from specialist advice and dependable UK stock.

Customer satisfaction supported by externally audited ISO 9001:2015 quality management. VacAir operates an ISO 9001:2015 certified quality management system, with externally audited processes supporting consistent service, customer satisfaction and continual improvement. We take pride in accurate product information, straightforward communication and honest business practices, with a reputation built through long-standing customer relationships.

OEM-trained engineers and dedicated Becker pump repair facilities. VacAir’s technical capabilities extend beyond supplying replacement vanes. Our engineers can fit new carbon vanes, inspect rotor and cylinder condition, investigate abnormal wear and undertake servicing or mechanical repairs. Our Becker pump repair and refurbishment workshop provides professional fitting, servicing and mechanical repair support at highly competitive rates.

Comprehensive Becker spare parts and maintenance support. Alongside replacement vanes, VacAir supplies a wide range of Becker vacuum pump spare parts, including OEM components and quality replacement alternatives. Customers can discuss filters, additional service components and wider pump requirements with a team that understands the complete machine.

Reliable supply for planned maintenance and urgent breakdowns. Whether servicing a Becker T 3.60, maintaining a VT 3.60 or repairing a DT 3.60, our aim is to make obtaining the correct replacement vanes straightforward. We combine UK stock, correct seven-vane set identification, competitive quotations, experienced technical support and worldwide delivery arrangements to help customers keep essential machinery operating.

FREQUENTLY ASKED QUESTIONS