Rietschle CLFT 100 Replacement Carbon Vanes – 524002 / 507110
RIETSCHLE CLFT 100 REPLACEMENT CARBON VANES
VacAir Superstore stocks Rietschle CLFT 100 replacement carbon vanes for dry-running rotary vane pump servicing. We supply end users, industrial maintenance departments, engineers and pump service companies.
Rietschle OEM reference: 507110
Extended OEM reference: 5071100000
Alternative OEM reference: 524002
VacAir reference: VA524002
Quantity required: 8 vanes per pump
Vane dimensions: 230 × 40 × 5 mm
Minimum vane height: 30 mm
Material: Carbon
Availability: IN STOCK
ELMO RIETSCHLE CLFT 100 REPLACEMENT CARBON VANES
VacAir Superstore stocks Rietschle CLFT 100 replacement carbon vanes for industrial dry-running rotary vane pump maintenance. We supply end users, engineering contractors, factory maintenance departments and vacuum pump repair specialists with replacement vanes for scheduled servicing, plant shutdowns and unexpected equipment failures.
The CLFT 100 requires eight carbon vanes, each measuring 230 × 40 × 5 mm. The replacement is identified by Rietschle OEM numbers 524002 and 507110. VacAir lists this vane as VA524002, and can supply the eight-vane quantity needed for a complete pump change.
In operation, the carbon vanes slide within the rotor slots, forming the chambers that allow the dry-running pump to work. Their height reduces gradually through normal use. The CLFT 100 vane measures 40 mm high when new, and the specified minimum working height is 30 mm. Inspecting all eight vanes helps engineers plan replacement before excessive wear or damage causes a breakdown.
VacAir also supplies Elmo Rietschle filters and spare parts and provides vacuum pump servicing and repairs. Customers can purchase the replacement vanes alone or arrange additional support for their maintenance work.
TECHNICAL INFORMATION
|
CLFT 100 VANE FEATURES✓Carbon vanes for the Rietschle CLFT 100 pump
✓Eight vanes for a complete replacement
✓230 × 40 × 5 mm replacement dimensions
✓30 mm minimum permitted vane height
✓Rietschle OEM 507110 / alternative 524002
✓In-stock vane supply with engineering support
|
RIETSCHLE CLFT 100 VANE INSPECTION & REPLACEMENT
|
For a CLFT 100 service, inspect the full set of eight carbon vanes and record their condition rather than relying on a single measurement. Uneven wear, chipped corners and cracked carbon can indicate a problem that requires attention before the pump is returned to service. Each new vane measures 230 × 40 × 5 mm. The 40 mm dimension is the original vane height, and the CLFT 100 minimum working height is 30 mm. Measure the vanes accurately, check for free movement in the rotor slots and follow the pump manufacturer’s instructions when deciding whether a set must be replaced. CLFT 100 maintenance checks before fitting new vanes: ✓ Measure the height of all eight carbon vanes ✓ Inspect vane edges for chips or fractures ✓ Check that the vanes slide freely in the rotor slots ✓ Examine the cylinder wall for scoring or damage ✓ Inspect the rotor and shaft condition ✓ Check bearings for excessive wear or movement ✓ Inspect inlet filtration and accumulated carbon dust ✓ Check for contamination or evidence of overheating ✓ Investigate any abnormal or uneven vane wear CLFT 100 wear limit: A new vane is 40 mm high and the minimum permitted working height is 30 mm. Replace worn or damaged vanes as a complete eight-vane set in accordance with the manufacturer’s maintenance instructions.
|
General carbon vane installation and inspection illustration.
|
ELMO RIETSCHLE CLFT 100 SPARE PARTS
|
VacAir supplies CLFT 100 replacement carbon vanes together with filters and other Rietschle pump spare parts. Keeping a complete eight-vane set available can help maintenance teams plan servicing and avoid unnecessary delays when a pump requires attention. When the pump is opened for vane replacement, inspect the inlet filter, rotor slots, internal running surfaces and bearings. Carbon dust, contamination or mechanical wear may affect the movement and service life of new vanes. If an old vane has fractured, the cause should be investigated before reassembly. We have supplied replacement vacuum pump vanes and spare parts since 1996. For the CLFT 100, we stock the 230 × 40 × 5 mm carbon vane under Rietschle references 524002 and 507110, with VacAir reference VA524002. Our team can also supply associated maintenance components. ✓ Rietschle 507110 replacement carbon vanes ✓ Inlet filters and maintenance components ✓ Vacuum pump spare parts and repair support ✓ Technical assistance identifying correct parts |
 |
CLFT 100 VANE FITTING & PUMP SERVICING
The Rietschle CLFT 100 requires eight carbon vanes for a complete replacement. VacAir supplies the vane set for customers who maintain their own pumps, and our service division can undertake fitting and additional engineering work where required.
Before installation, compare the removed vanes with the 30 mm minimum working height. Check the rotor slots for free movement, examine the cylinder and rotor surfaces for scoring and inspect the bearings and inlet filtration. The condition of these components matters as much as the height of the old vanes.
If the pump has experienced broken vanes, abnormal noise, overheating or a reduction in performance, replacing the carbon alone may not resolve the underlying fault. A proper inspection can reveal contamination, restricted movement or internal wear that could shorten the life of the replacement set.
VacAir supplies CLFT 100 vanes from stock and has OEM factory-trained engineers available for pump servicing, fault diagnosis, preventative maintenance and repairs. This allows customers to obtain the parts they need while also having access to practical engineering support.
CLFT 100 CARBON VANES — UK & WORLDWIDE SUPPLY
|
VacAir supplies Rietschle CLFT 100 carbon vanes from Leeds to customers throughout the United Kingdom. Our customers include industrial production facilities, engineering businesses, maintenance contractors and specialist vacuum pump repair companies. For overseas customers, we also arrange deliveries to Europe and worldwide destinations. Depending on the location and urgency, express courier services and collection from our Leeds trade counter can be discussed. We support both planned maintenance orders and urgent replacement requirements. For a complete CLFT 100 vane change, order eight carbon vanes measuring 230 × 40 × 5 mm. The relevant Rietschle references are 524002 and 507110, with VacAir part number VA524002. Related DFT 100 and VFT 100 pumps use only four vanes, so the model-specific quantity matters. To order CLFT 100 vanes or discuss delivery, call 0113 2088501 or email sales@vacair-superstore.com. |
 |
WHY BUY RIETSCHLE CLFT 100 VANES FROM VACAIR?
|
Since 1996
Vane Supply
|
Technical Help
Part Identification
|
ISO 9001:2015
Quality Management
|
OEM-Trained
Engineers
|
Supplying vacuum pump vanes since 1996. VacAir has decades of experience selling replacement carbon vanes, filters and pump spares to industrial customers, maintenance engineers and specialist repair companies.
CLFT 100 carbon vanes in stock. We supply the correct 230 × 40 × 5 mm replacement vane, with eight required per pump. Customers can obtain vanes for routine servicing or urgent replacement work.
Supporting preventative maintenance. Replacing worn carbon vanes at the appropriate time helps operators manage pump maintenance and reduce the risk of avoidable interruptions to production.
Two OEM numbers for the same vane. Rietschle 524002 and 507110 both identify the vane used in the CLFT 100. VacAir supplies it under reference VA524002.
More than a parts supplier. Our business also supplies filters and maintenance components, while OEM-trained engineers can assist with vane fitting, servicing, fault investigation and vacuum pump repairs.
UK, European and worldwide supply. VacAir serves customers at home and overseas, with delivery options for planned orders and urgent replacement needs.
RIETSCHLE CLFT 100 CARBON VANE QUESTIONS
Where can I buy Rietschle CLFT 100 carbon vanes?
How many carbon vanes does the Rietschle CLFT 100 require?
What size are CLFT 100 replacement carbon vanes?
What is the minimum working height for CLFT 100 vanes?
Are Rietschle 524002 and 507110 the same carbon vane?
Do the CLFT 100 and VFT 100 use the same carbon vanes?
What should be checked when replacing CLFT 100 vanes?
Can VacAir supply CLFT 100 vanes urgently and fit them?
Trust VacAir Superstore for all your vacuum pump needs.
Contact us for replacement vanes, spare parts, vacuum pumps and engineering support.
