Rietschle DTA 80 Carbon Vanes – 523778 / 526886 / 523851
RIETSCHLE DTA 80 REPLACEMENT CARBON VANES
VacAir Superstore stocks replacement carbon vanes for the Rietschle DTA 80, ready for industrial compressor maintenance and repair requirements. Order the 130 × 52 × 5 mm vane using OEM 523778, or alternatives 526886 and 523851. A complete DTA 80 change takes six vanes; the minimum permitted vane height is 38 mm.
Rietschle OEM reference: 523778
Alternative OEM references: 526886 | 523851
Extended OEM reference: 5237780000
VacAir reference: VA523778
Quantity required: 6 vanes per pump
Vane dimensions: 130 × 52 × 5 mm
Minimum vane height: 38 mm
Material: Carbon
Availability: IN STOCK
ELMO RIETSCHLE DTA 80 REPLACEMENT CARBON VANES
Buy Rietschle DTA 80 carbon vanes from UK stock at VacAir Superstore. Our spares department supplies the replacement carbon needed by maintenance engineers, plant operators and compressor service businesses. Ordering the right six-vane set ahead of a shutdown can prevent avoidable delays when the machine is opened.
The DTA 80 takes six 130 × 52 × 5 mm vanes, supplied as VacAir reference VA523778. The main OEM number is 523778; 526886 and 523851 are alternative references. These numbers make it straightforward to match an existing parts schedule or worn vane to the replacement we stock.
At manufacture the vane height is 52 mm. For the DTA 80 the minimum permitted height is 38 mm. Wear measurements are useful for maintenance planning, but a cracked, chipped or binding vane may need replacing before it reaches that dimension.
When purchasing for a DTA 80, specify the complete set of six rather than an individual replacement. The part number is shared with other Rietschle equipment, so the quantity stated here is specifically for the DTA 80; the master page carries the broader model compatibility information.
VacAir also supplies Rietschle spare parts and filtration. Should a routine vane change reveal more extensive damage, our pump servicing and repair team can assist.
TECHNICAL INFORMATION
|
DTA 80 VANE FEATURES✓ Replacement carbon vanes for the Rietschle DTA 80
✓ Six vanes for a full DTA 80 rotor change
✓ 130 × 52 × 5 mm carbon vane dimensions
✓ 38 mm model-specific minimum working height
✓ Rietschle reference 523778 / 526886 / 523851
✓ Stocked by a specialist vacuum pump supplier
|
RIETSCHLE DTA 80 VANE INSPECTION & REPLACEMENT
|
When the DTA 80 is opened for maintenance, examine the full set of six vanes before discarding them. The pattern of wear can be informative: one vane markedly shorter than its neighbours, a damaged leading edge or a polished patch in an unexpected position may indicate a problem worth investigating. A new DTA 80 vane is 130 × 52 × 5 mm, including an original 52 mm height. The 38 mm minimum working height is a measurement limit, not a guarantee that a damaged vane can remain in service. Replace the complete set when wear or condition requires it. DTA 80 checks before a replacement set is installed: ✓ Measure all six vanes and record any significant difference ✓ Look closely at both long edges for cracks or chips ✓ Check the vane contact faces for uneven polishing ✓ Verify that each rotor slot is clean and permits movement ✓ Examine the internal cylinder for scoring and local wear ✓ Inspect the rotor and shaft for visible damage ✓ Assess bearing condition and any abnormal movement ✓ Inspect inlet filtration and air passages ✓ Clear carbon dust and fragments in accordance with service guidance ✓ Investigate any signs of excessive temperature or contamination DTA 80 vane limit: Original vane height 52 mm; minimum permitted height 38 mm. Examine the condition of the entire six-vane set and follow the Rietschle maintenance instructions.
|
 |
ELMO RIETSCHLE DTA 80 SPARE PARTS
|
Order DTA 80 replacement vanes through VacAir’s spares department. We hold the 523778 carbon vane in UK stock, giving customers a direct source for the six pieces needed for a complete compressor vane change. The alternative references 526886 and 523851 are also recognised. A compressor service often involves more than the vane set. Inlet filtration, bearings and internal running surfaces should be assessed before reassembly, particularly if the removed carbon has fractured or produced excessive debris. VacAir has supplied industrial vacuum equipment parts since 1996. Our team can supply six 130 × 52 × 5 mm DTA 80 vanes and discuss the other Rietschle service items required for the same maintenance visit. ✓ Rietschle 523778 / 526886 / 523851 carbon vane replacements ✓ Filters and routine maintenance components ✓ Related Rietschle compressor and vacuum pump spares ✓ Access to experienced engineers for more involved repairs |
 |
DTA 80 VANE FITTING & PUMP SERVICING
The DTA 80 uses six replacement carbon vanes under OEM 523778, with 526886 and 523851 as alternative references. VacAir supplies these for maintenance teams undertaking their own replacement and also offers professional servicing where required.
Before fitting new carbon, compare the removed vanes with the 38 mm wear limit. A service should also confirm that the rotor slots are clean and the vanes can travel freely, with no fragments or contamination left inside the chamber.
If a compressor has stopped after a vane fracture, simply fitting fresh vanes may not address the cause. Check the internal running surface, bearing condition, filtration and signs of excessive heat before returning the machine to operation.
Our primary role is to sell and supply the correct DTA 80 vanes promptly. Customers who need more than parts can draw on VacAir’s OEM-trained engineering team for fitting, preventative maintenance, diagnosis and repairs.
DTA 80 CARBON VANES — UK & WORLDWIDE SUPPLY
|
VacAir supplies Rietschle DTA 80 replacement vanes from Leeds to production facilities, service contractors and distributors throughout the UK. We hold the 523778 vane and can supply the six required per compressor for routine or unplanned maintenance. Our spares team also handles overseas enquiries, with UK, European and worldwide delivery options. Customers working to a maintenance deadline can discuss suitable courier services or collection from our Leeds premises. To avoid ordering delays, quote DTA 80, 523778 (or 526886 / 523851) and the quantity six. Each replacement measures 130 × 52 × 5 mm; the model-specific minimum height is 38 mm. For a quotation or delivery enquiry, call 0113 2088501 or email sales@vacair-superstore.com. |
 |
WHY BUY RIETSCHLE DTA 80 VANES FROM VACAIR?
|
Since 1996
Vane Supply
|
Technical Help
Part Identification
|
ISO 9001:2015
Quality Management
|
OEM-Trained
Engineers
|
Replacement vane specialists since 1996. VacAir has been part of the industrial vacuum pump market for three decades. DTA 80 buyers benefit from an established spares supplier with real product knowledge, rather than relying on a general parts catalogue that cannot explain the equipment behind the listing.
523778 DTA 80 vanes on the shelf in the UK. We stock the 130 × 52 × 5 mm replacement vane, identified by 523778, 526886 and 523851. A DTA 80 takes six, so maintenance teams can source a full replacement quantity through our spares department.
We understand pumps, not just part numbers. Our business supplies vacuum pumps, compressors, vanes, filters and engineering services. We know that a replacement vane is part of a working machine and that practical pump knowledge matters when customers are making purchasing decisions.
Competitive vane pricing and a published Price Promise. VacAir works to combine value with knowledgeable service. Our Price Promise terms set out how qualifying comparable offers from UK suppliers are considered.
Customer satisfaction is central to our business. Our ISO 9001:2015 quality management processes include customer feedback, review and improvement, with independent external audits. We want customers to judge us by the parts we supply and the service they receive.
We do not fabricate product reviews, invent customer ratings or display artificial review scores on our website or provide them to search engines. We have no need to. Our products, expertise and reputation have supported customers across the pump industry for decades.
Engineering support when a vane change becomes a repair. A broken or unevenly worn DTA 80 vane may call for more than a new set. VacAir’s OEM-trained engineers can assist with inspection, fault finding, fitting and repair, while customers who need only vanes can buy just the parts.
Dependable supply for UK and international customers. We combine accessible stock, experienced people and an ISO 9001:2015 quality management system with supply throughout the UK and overseas. Our aim is to make purchasing specialist carbon vanes straightforward and reassuring.
RIETSCHLE DTA 80 CARBON VANE QUESTIONS
Can I buy Rietschle DTA 80 carbon vanes directly from VacAir?
How many replacement vanes are fitted to a DTA 80?
What dimensions should I order for DTA 80 vanes?
What is the minimum DTA 80 carbon vane height?
Do 523778, 526886 and 523851 refer to the same vane?
Why should the DTA 80 vanes be changed as a set?
What should be inspected before fitting new DTA 80 carbon?
Can VacAir deliver DTA 80 vanes and provide fitting support?
Trust VacAir Superstore for all your vacuum pump needs.
Contact us for replacement vanes, spare parts, vacuum pumps and engineering support.
