Rietschle DTB 340 Replacement Carbon Vanes – 526079
RIETSCHLE DTB 340 REPLACEMENT CARBON VANES
Buy Rietschle DTB 340 replacement carbon vanes from VacAir Superstore, a specialist UK supplier of industrial vacuum pump and compressor spare parts since 1996. We supply the 310 × 91 × 6 mm carbon vane identified by Rietschle OEM reference 526079. The DTB 340 requires five vanes for a complete replacement, and the minimum permitted vane height is 57 mm. Whether you are planning routine maintenance or replacing worn carbon following an inspection, our experienced spares team can assist with the correct parts, competitive prices and delivery arrangements.
Rietschle OEM reference: 526079
Extended OEM reference: 5260790000
VacAir reference: VA526079
Quantity required: 5 vanes per pump
Vane dimensions: 310 × 91 × 6 mm
Minimum vane height: 57 mm
Material: Carbon
Availability: IN STOCK
ELMO RIETSCHLE DTB 340 REPLACEMENT CARBON VANES
Keep your Rietschle DTB 340 compressor operating with replacement carbon vanes from VacAir Superstore. We supply industrial carbon vanes to maintenance departments, production facilities, engineering contractors and specialist compressor service companies. With experience in vacuum pump and compressor spares dating back to 1996, our team understands the importance of getting the right replacement parts to customers when they are needed.
The Rietschle DTB 340 requires five carbon vanes measuring 310 × 91 × 6 mm. The correct primary OEM reference is 526079, also recorded in extended form as 5260790000. VacAir identifies the replacement vane as VA526079. This specification is also used in the VTB 340, although the applicable maintenance limits must always be checked for the individual pump or compressor model.
Each new DTB 340 carbon vane has an original height of 91 mm. The minimum permitted height for the DTB 340 is 57 mm. Measuring the remaining vane height is an important part of planned maintenance, but engineers should also inspect the carbon for cracking, uneven wear, damaged running edges and evidence of restricted movement in the rotor slots.
When the DTB 340 requires a complete carbon vane change, order five matching 526079 replacement vanes. Our dedicated master product page provides the shared vane specification, while this model page identifies the five-vane quantity and 57 mm wear limit applicable to the DTB 340. This helps purchasing teams and maintenance engineers distinguish between a common part number and model-specific service requirements.
VacAir also supplies Elmo Rietschle spare parts and filters. If an inspection reveals damaged internal components or a problem extending beyond normal carbon vane wear, our vacuum pump and compressor servicing team can provide additional assistance.
TECHNICAL INFORMATION
|
DTB 340 VANE FEATURES✓ Replacement carbon vanes for the Rietschle DTB 340
✓ Five matching vanes for a complete replacement
✓ Original vane dimensions of 310 × 91 × 6 mm
✓ DTB 340 minimum permitted height of 57 mm
✓ OEM references 526079 / 5260790000
✓ UK stock and specialist assistance from VacAir
|
RIETSCHLE DTB 340 VANE INSPECTION & REPLACEMENT
|
A DTB 340 service should include a careful examination of all five carbon vanes and the internal running surfaces. Because the vanes are 310 mm long, inspect each piece along its full length for cracks, chipped corners, uneven wear and unusual contact patterns that may indicate problems inside the compressor. New DTB 340 vanes measure 310 × 91 × 6 mm, giving an original height of 91 mm. The minimum permitted height is 57 mm. Compare the measurements of all five vanes, and do not rely on height alone where there are signs of fracture, binding or abnormal wear. DTB 340 inspection checklist: ✓ Measure the remaining height of all five vanes ✓ Examine each vane along its full 310 mm length ✓ Check running edges and corners for damage ✓ Compare wear patterns across the complete set ✓ Inspect rotor slots for debris or restricted movement ✓ Check internal running surfaces for scoring ✓ Assess rotor, shaft and bearing condition ✓ Inspect inlet filtration and possible contamination ✓ Remove loose carbon fragments and dust safely ✓ Investigate signs of overheating or uneven wear DTB 340 wear limit: New vane height 91 mm; minimum permitted height 57 mm. Inspect the complete set of five vanes and follow the manufacturer’s maintenance instructions.
|
|
ELMO RIETSCHLE DTB 340 SPARE PARTS
|
VacAir supplies the Rietschle 526079 carbon vane for the DTB 340 compressor. Measuring 310 × 91 × 6 mm, this replacement is also identified by extended OEM reference 5260790000 and VacAir code VA526079. Five vanes are required for a complete replacement, making correct identification and ordering particularly important when arranging a planned shutdown. Carbon vane replacement is an opportunity to examine the compressor’s other service components. Check inlet filtration, rotor slots, bearings and internal running surfaces for conditions that may shorten the life of the new vanes. Where a vane has fractured, additional inspection may be necessary before the machine can be returned to operation. Our specialist spares department can help with the carbon vanes themselves and with other Elmo Rietschle maintenance requirements. With decades of industrial pump experience, VacAir supports both customers maintaining their own equipment and engineers responsible for multiple compressors across a site. ✓ Rietschle 526079 / 5260790000 carbon vanes ✓ Inlet filters and routine maintenance parts ✓ Associated Rietschle pump and compressor spares ✓ Technical assistance and specialist repair support |
 |
DTB 340 VANE FITTING & PUMP SERVICING
A complete Rietschle DTB 340 carbon vane replacement requires five matching 526079 vanes. VacAir supplies these parts directly to customers with their own maintenance engineers, as well as to specialist service contractors working on industrial compressors.
Before fitting the new set, measure and inspect the removed vanes. The original height is 91 mm and the DTB 340 minimum permitted height is 57 mm. Ensure the rotor slots are clean and unobstructed, check the internal running surfaces and follow the manufacturer’s procedures for correct vane installation and commissioning.
If the old carbon shows fractured edges, severe scoring or noticeably different wear between vanes, the underlying cause should be investigated. Installing new carbon into a damaged or contaminated compressor may lead to premature wear or another failure. Bearings, filtration and rotor condition should therefore form part of the inspection where appropriate.
VacAir’s principal aim is to supply the correct replacement vanes at competitive prices. There is no requirement to purchase a fitting service. However, our OEM-trained engineers can provide professional assistance with vane fitting, fault diagnosis, servicing and repairs where customers need additional support.
DTB 340 CARBON VANES — UK & WORLDWIDE SUPPLY
|
VacAir supplies Rietschle DTB 340 replacement carbon vanes from Leeds to manufacturing companies, maintenance contractors and industrial compressor operators across the UK. We stock the 526079 vane and can supply the five pieces required for a complete replacement. Our customer base also extends throughout Europe and worldwide. Whether a business is planning its next scheduled maintenance interval or needs parts following an unexpected breakdown, our team can discuss delivery arrangements, collection and available despatch services. When contacting VacAir, quote DTB 340 together with 526079 or 5260790000. The replacement vane measures 310 × 91 × 6 mm, and the 57 mm minimum permitted height applies specifically to the DTB 340. For a quotation, urgent enquiry or international delivery information, call 0113 2088501 or email sales@vacair-superstore.com. Our experienced team can help identify the right carbon vanes and discuss your purchasing requirements. |
|
WHY BUY RIETSCHLE DTB 340 VANES FROM VACAIR?
|
Since 1996
Vane Supply
|
Technical Help
Part Identification
|
ISO 9001:2015
Quality Management
|
OEM-Trained
Engineers
|
Established carbon vane suppliers since 1996. VacAir has spent decades working with industrial vacuum pumps, compressors and their replacement parts. Customers purchasing DTB 340 carbon vanes benefit from dealing with a specialist business that understands how important correct identification and dependable parts supply are when industrial equipment is due for maintenance.
Rietschle 526079 replacement vanes held in UK stock. We supply the 310 × 91 × 6 mm carbon vane identified by OEM references 526079 and 5260790000. The DTB 340 requires five vanes, and our spares department can help customers obtain the complete replacement quantity rather than ordering individual pieces from different suppliers.
Technical understanding of pump models and carbon vane specifications. Our team supplies vanes, filters, spare parts and industrial vacuum equipment, giving customers access to specialist product knowledge. We recognise that a shared OEM vane reference does not automatically mean identical service limits across every compatible model. For the DTB 340, the relevant minimum vane height is 57 mm.
Competitive prices backed by our Price Promise. VacAir aims to offer excellent value on replacement carbon vanes, supported by experienced technical staff and straightforward ordering. Our published Price Promise terms explain how qualifying like-for-like offers from other UK suppliers can be considered at quotation stage.
ISO 9001:2015 quality management and customer satisfaction. Our certified quality management system incorporates customer feedback, review and continual improvement. We believe accurate product descriptions, clear communication and dependable customer service are essential when supplying components used in industrial equipment.
We do not fabricate product reviews, invent customer ratings or display artificial review scores on our website or provide them to search engines. We have no need to. Our products, expertise and reputation have supported customers across the pump industry for decades.
OEM-trained engineers available for additional support. Customers who only need DTB 340 carbon vanes can purchase the five-piece replacement quantity directly from VacAir. If an inspection reveals damaged rotor slots, internal scoring or other mechanical problems, our engineering team can also assist with diagnosis, fitting, servicing and repairs without making those services a condition of buying replacement parts.
UK and international supply from an experienced specialist. VacAir supports industrial operators, maintenance teams and equipment service companies throughout Britain and overseas. Combining specialist carbon vane stock with knowledgeable staff, engineering support and an ISO 9001:2015 quality management system helps us provide a dependable service for DTB 340 replacement vane enquiries.
RIETSCHLE DTB 340 CARBON VANE QUESTIONS
Where can I buy Rietschle DTB 340 replacement carbon vanes?
How many carbon vanes does a Rietschle DTB 340 require?
What size are Rietschle DTB 340 carbon vanes?
What is the minimum permitted DTB 340 vane height?
Are 526079 and 5260790000 the same OEM vane reference?
Does the VTB 340 use the same carbon vane as the DTB 340?
What should I check before fitting new DTB 340 carbon vanes?
Can VacAir deliver DTB 340 vanes internationally and assist with fitting?
Trust VacAir Superstore for all your vacuum pump needs.
Contact us for replacement vanes, spare parts, vacuum pumps and engineering support.
