Elmo Rietschle KLT 25 Replacement Carbon Vanes
Maintain your Elmo Rietschle KLT 25 dry-running rotary vane vacuum pump with replacement carbon vanes supplied by VacAir.
Whether you are arranging a planned vane change or need parts following an unexpected pump stoppage, VacAir can assist with component identification and urgent delivery options.
Replacement vanes, technical assistance and delivery support.
ELMO RIETSCHLE KLT 25 REPLACEMENT CARBON VANES
The Elmo Rietschle KLT 25 relies on carbon vanes as part of its dry-running rotary vane pumping mechanism. Over time, these components wear through normal operation and should be checked during scheduled maintenance. VacAir supplies replacement vanes to help keep KLT 25 pumps operating reliably.
Each KLT 25 requires 6 carbon vanes measuring 85 × 39 × 4 mm for a complete change. The corresponding Rietschle OEM reference is 513431, with VacAir replacement reference VA513431.
Identifying vanes by both pump model and original part number helps avoid ordering errors, especially where the same carbon vane specification is used across different Rietschle pump families. This page covers the six-vane requirement for the KLT 25, while our master product page provides the shared OEM reference information.
VacAir can also assist with Elmo Rietschle spare parts and vacuum pump servicing and repairs.
TECHNICAL INFORMATION
|
KLT 25 VANE FEATURES
✓
Replacement carbon vanes for the KLT 25 pump
✓
Six matching vanes for a complete replacement
✓
85 × 39 × 4 mm vane dimensions
✓
Corresponds to OEM part number 513431
✓
In stock for planned maintenance or repairs
✓
UK supply with international delivery options |
REPLACING WORN KLT 25 CARBON VANES
|
Carbon vanes are consumable components within the KLT 25 vacuum pump. As the rotor turns, the vanes operate against the internal cylinder surface and gradually wear. Their condition should be monitored according to the manufacturer’s maintenance recommendations. When a complete replacement is required, fit six correctly specified 513431 carbon vanes. The opportunity should also be taken to inspect the condition of the pumping chamber and other components that may influence vane life. Inspection points include: ✓ Rotor slots for cleanliness and free vane movement
✓ Cylinder surfaces for scoring or abnormal wear
✓ Bearings and rotor condition
✓ Inlet filtration and possible restrictions
✓ Carbon dust or fragments from damaged vanes
✓ Evidence of excessive temperature or uneven wear
Before fitting new vanes: If the pump has experienced a vane breakage, unusual noise or premature wear, investigate the cause and inspect the internal components. Follow the manufacturer’s fitting instructions and service limits.
|
General carbon vane maintenance illustration.
|
ELMO RIETSCHLE KLT 25 SPARE PARTS
|
When servicing a KLT 25, replacing the carbon vanes may be only one part of the maintenance work. Filters and other components should also be considered according to the pump’s operating condition and service history. VacAir supplies Elmo Rietschle spare parts for industrial vacuum pump maintenance and repairs. Our business history dates back to 1996, and we work with customers who need reliable replacement components and knowledgeable technical support. For a planned KLT 25 overhaul, our team can assist with identifying additional parts using the pump model, serial number and existing component references. This can help maintenance teams prepare the components they require before taking a pump out of service. ✓ Replacement carbon vanes and vane sets
✓ Inlet and exhaust filtration components
✓ Other vacuum pump maintenance spares
✓ Parts identification and engineering advice
|
|
KLT 25 VANE FITTING & PUMP SERVICING
VacAir supports customers carrying out their own KLT 25 maintenance by supplying the six 513431 carbon vanes required for a complete change. The correct dimensions and part references make it easier to identify replacement components before dismantling the pump.
Where a pump has been running with excessively worn vanes, it may be necessary to inspect the rotor, cylinder and bearings before fitting replacements. This is especially important following a vane fracture or repeated premature wear.
Customers who prefer professional assistance can use VacAir’s OEM factory-trained engineers for carbon vane fitting, vacuum pump servicing and repairs.
Our service team can assist with both planned maintenance and the investigation of pumps that have developed performance problems or mechanical faults.
KLT 25 VANES — UK, EUROPEAN & WORLDWIDE SUPPLY
|
VacAir supplies Rietschle KLT 25 replacement carbon vanes to customers throughout the United Kingdom and to international destinations. For routine maintenance, we can help arrange supply in advance of a planned service. Where downtime is already affecting production, our team can discuss urgent despatch options and suitable delivery services. Whether you need a single replacement vane or the six vanes required for a complete KLT 25 change, contact VacAir for availability, technical assistance and delivery arrangements. |
|
WHY BUY KLT 25 REPLACEMENT VANES FROM VACAIR?
|
Since 1996
Vacuum pump specialists
|
Technical Help
Part identification
|
ISO 9001:2015
Quality management
|
OEM-Trained
Engineering support
|
Finding a replacement carbon vane should be straightforward when the correct OEM number and pump model are available. For the KLT 25, VacAir identifies the required vane as 513431, measuring 85 × 39 × 4 mm.
Our team can help customers distinguish between similar Rietschle vane specifications and confirm the quantity required for their particular pump. This is especially useful when several machines are maintained on the same site.
VacAir combines replacement parts supply with engineering knowledge, servicing facilities and a business history dating back to 1996. Our ISO 9001:2015 quality management system supports our approach to providing products and technical services.
KLT 25 CARBON VANE QUESTIONS
How many carbon vanes are required for a KLT 25?
What dimensions are the KLT 25 replacement vanes?
What is the Rietschle OEM number for KLT 25 vanes?
Where can I find the 513431 master product page?
Should all six KLT 25 vanes be changed at the same time?
What should be checked if a KLT 25 vane has broken?
Can VacAir supply KLT 25 spares and servicing?
Trust VacAir Superstore for all your vacuum pump needs.
Contact us for replacement vanes, spare parts, vacuum pumps and engineering support.
