Elmo Rietschle KTA 60 Carbon Vanes
VacAir supplies replacement carbon vanes for the Elmo Rietschle KTA 60 dry-running rotary vane pump. Each pump requires 6 carbon vanes measuring 100 × 52 × 5 mm.
If your KTA 60 is due for a vane change or requires attention following a breakdown, contact VacAir to order replacement parts, technical help and urgent delivery options.
Specialist carbon vane supply and vacuum pump support.
ELMO RIETSCHLE KTA 60 REPLACEMENT CARBON VANES
The Elmo Rietschle KTA 60 is a dry-running rotary vane pump that relies on carbon vanes within its pumping mechanism. As these components wear during operation, regular inspection and timely replacement form an important part of maintaining the pump.
VacAir supplies 100 × 52 × 5 mm replacement carbon vanes for the KTA 60. These correspond to Rietschle OEM reference 523777, alternative OEM reference 528802, and VacAir part number VA523777. The KTA 60 requires six vanes for a complete change.
The specified minimum permitted vane height is 38 mm, compared with the original height of 52 mm. This provides a useful measurement when assessing vane wear during routine servicing. The same 523777 / 528802 vane specification is also used in other Rietschle pump models, so the correct quantity should be checked for each application.
For additional maintenance requirements, VacAir also supplies Elmo Rietschle spare parts and offers vacuum pump servicing and repairs.
KTA 60 VANE FEATURES
✓
Replacement carbon vanes for the KTA 60 pump
✓
Six vanes required for a complete replacement
✓
100 × 52 × 5 mm carbon vane dimensions
✓
Minimum permitted vane height of 38 mm
✓
OEM references 523777 and 528802
✓
In stock with specialist technical support |
KTA 60 CARBON VANE WEAR & REPLACEMENT
|
The carbon vanes fitted to the Elmo Rietschle KTA 60 gradually wear as the pump operates. New vanes measure 100 × 52 × 5 mm, and the minimum permitted vane height is 38 mm. Checking vane height during scheduled servicing helps determine whether the components are approaching their replacement limit. Once a vane reaches the 38 mm minimum height, replacement is required. The KTA 60 uses six carbon vanes for a complete change. VacAir recommends replacing the complete set together rather than combining new and worn vanes. During inspection, check: ✓ Vane height against the 38 mm wear limit
✓ Rotor slots for free vane movement
✓ Cylinder walls for scoring or unusual wear
✓ Bearings and rotor condition
✓ Inlet filtration and contamination
✓ Carbon fragments, cracking or uneven wear
KTA 60 wear limit: New vanes are 52 mm high, with a minimum permitted height of 38 mm. Replace vanes reaching this limit and follow the manufacturer’s servicing instructions. If a vane has broken, inspect the pump for the underlying cause before fitting replacements.
|
General carbon vane maintenance illustration.
|
ELMO RIETSCHLE KTA 60 SPARE PARTS
|
Keeping a KTA 60 in service involves more than inspecting its carbon vanes. Filtration and other maintenance components should also be checked to identify restrictions, contamination or developing faults. VacAir has supplied Elmo Rietschle vacuum pump spare parts since 1996. We support maintenance engineers, industrial users and service companies with replacement components and technical assistance. When arranging KTA 60 maintenance, our team can assist with identifying the appropriate parts from the pump model, serial number and existing component references. This is particularly useful when preparing for scheduled servicing or more extensive repair work. ✓ Carbon vanes and replacement vane sets
✓ Inlet and exhaust filtration components
✓ Additional pump service and repair parts
✓ Technical help with component identification
|
|
KTA 60 VANE FITTING & PUMP SERVICING
Maintenance teams carrying out their own KTA 60 servicing can obtain the six 523777 / 528802 replacement carbon vanes required for a complete change directly from VacAir.
The specified 38 mm minimum vane height is an important maintenance reference, but vane wear should not be assessed in isolation. Excessive deposits, broken vanes, unusual noise or damage to the rotor and cylinder surfaces may indicate a need for further investigation.
VacAir’s experienced OEM factory-trained engineers can assist with vane fitting, preventative servicing, fault diagnosis and vacuum pump repairs.
Whether the work involves a planned maintenance shutdown or an unexpected pump failure, our team can discuss appropriate servicing and repair options.
KTA 60 CARBON VANES — WORLDWIDE SUPPLY
|
VacAir supplies Rietschle KTA 60 carbon vanes to industrial customers, maintenance departments and vacuum pump service companies throughout the UK, Europe and worldwide. Replacement parts can be arranged for planned servicing, while urgent delivery options are available for customers dealing with unexpected downtime. Our team can discuss express despatch, courier arrangements and collection options. Customers searching for either 523777 or 528802 can contact VacAir for assistance with the correct replacement vane specification and delivery requirements. |
|
WHY BUY KTA 60 CARBON VANES FROM VACAIR?
|
Since 1996
Vacuum pump specialists
|
Technical Help
Part identification
|
ISO 9001:2015
Quality management
|
OEM-Trained
Engineering support
|
Correct vane identification is important when maintaining Rietschle dry-running rotary vane pumps. The KTA 60 uses the 100 × 52 × 5 mm carbon vane specification identified by OEM references 523777 and 528802.
VacAir brings these alternative OEM references together on the associated master product page, helping customers locate the correct vane whether they search by pump model or manufacturer part number.
Our business history dates back to 1996. We supply replacement vanes and pump spares, with technical assistance and experienced engineers available for servicing and repairs.
Our operations are supported by an ISO 9001:2015 quality management system.
KTA 60 CARBON VANE QUESTIONS
How many carbon vanes does a Rietschle KTA 60 require?
What are the KTA 60 carbon vane dimensions?
What is the minimum permitted vane height for the KTA 60?
Are Rietschle 523777 and 528802 the same carbon vane?
Where can I find the 523777 / 528802 master vane page?
Should all six KTA 60 vanes be replaced together?
Can VacAir help with KTA 60 servicing and spare parts?
Trust VacAir Superstore for all your vacuum pump needs.
Contact us for replacement vanes, spare parts, vacuum pumps and engineering support.
