Elmo Rietschle KTA 80/4 Replacement Carbon Vanes
Maintain your Elmo Rietschle KTA 80/4 dry-running rotary vane pump with correctly specified replacement carbon vanes from VacAir.
Urgent deliveries on Carbon vanes, vacuum pump spare parts and technical support provided by pump eperts.
ELMO RIETSCHLE KTA 80/4 REPLACEMENT CARBON VANES
For operators maintaining an Elmo Rietschle KTA 80/4, the condition of the carbon vanes is an important consideration in keeping the pump working efficiently. These components move within the rotor during operation and experience gradual wear, making periodic inspection a necessary part of the maintenance programme.
The KTA 80/4 requires six carbon vanes measuring 130 × 52 × 5 mm. VacAir supplies replacement vanes under reference VA523778, corresponding to Rietschle OEM number 523778. The alternative OEM references are 526886 and 523851.
With an original vane height of 52 mm and a minimum permitted height of 38 mm, maintenance engineers can assess wear by measuring the remaining height of the existing carbon vanes. Accurate identification of the pump variant is equally important, as some other KTA 80 models have different replacement requirements.
In addition to replacement vanes, VacAir supplies Elmo Rietschle spare parts and provides vacuum pump maintenance and repair services.
TECHNICAL INFORMATION
|
KTA 80/4 VANE FEATURES
✓
Carbon vanes for the Elmo Rietschle KTA 80/4
✓
Six vanes required for a complete replacement
✓
Vane dimensions of 130 × 52 × 5 mm
✓
Minimum permitted wear height of 38 mm
✓
Manufacturer reference 523778
✓
Cross-references 526886 and 523851 |
INSPECTING & REPLACING KTA 80/4 CARBON VANES
|
Routine vane inspection is an important part of maintaining the KTA 80/4. The carbon vanes gradually lose height during operation, and measuring them allows maintenance engineers to determine whether they remain within the permitted service limits. The KTA 80/4 uses six vanes measuring 130 × 52 × 5 mm. Their minimum permitted height is 38 mm. Once this limit is reached, the vanes should be replaced as a complete set. Inspecting the internal pump components at the same time can help identify other causes of poor performance or premature wear. During a KTA 80/4 vane inspection, check: ✓ Remaining vane height against the 38 mm limit
✓ Carbon vane edges for cracking or chipping
✓ Rotor slots for smooth vane movement
✓ Cylinder surfaces for wear and scoring
✓ Rotor and bearing condition
✓ Inlet filters and contamination
✓ Evidence of overheating or uneven wear
KTA 80/4 wear limit: New carbon vanes measure 52 mm in height, with a minimum permitted height of 38 mm. Replace worn vanes before operating beyond the specified limit. If the pump contains broken carbon fragments, inspect and clean the internal components before fitting new vanes.
|
General carbon vane maintenance illustration.
|
KTA 80/4 VACUUM PUMP SPARE PARTS
|
A KTA 80/4 service should consider the overall condition of the pump rather than the carbon vanes alone. Filtration, bearings and other internal components may also require attention depending on operating conditions and service history. Since 1996, VacAir has supported industrial vacuum pump users with replacement components, technical assistance and servicing expertise. Our team can assist with identifying KTA 80/4 parts using the pump model, serial number and existing component references. This can be particularly helpful when ordering spares for equipment that has been in service for many years. ✓ Replacement KTA 80/4 carbon vanes
✓ Inlet and exhaust filter components
✓ Additional servicing and repair spares
✓ Assistance with identifying replacement parts
|
|
KTA 80/4 VANE FITTING & PUMP SERVICING
VacAir supplies replacement carbon vanes for maintenance engineers servicing the Elmo Rietschle KTA 80/4. A full vane replacement requires six carbon vanes corresponding to OEM reference 523778.
When planning a vane change, check the existing components against the 38 mm minimum permitted height. The rotor, cylinder and other internal parts should also be examined for abnormal wear or damage that might affect the operation of the new vanes.
Customers who prefer professional servicing can use VacAir’s experienced OEM factory-trained engineers for vane replacement, routine maintenance, fault diagnosis and vacuum pump repairs.
Where a KTA 80/4 has suffered a breakdown, investigating the cause of the problem before fitting replacement parts can help prevent a repeat failure.
KTA 80/4 VANES — UK & WORLDWIDE SUPPLY
|
VacAir supplies Elmo Rietschle KTA 80/4 carbon vanes to industrial operators, engineering companies and maintenance teams in the UK, across Europe and worldwide. Replacement parts can be arranged for planned maintenance or urgent repair requirements. Our team can discuss appropriate courier services, international shipping and collection arrangements according to the customer’s needs. When contacting VacAir, quote the KTA 80/4 pump model or one of the recognised OEM references: 523778, 526886 or 523851. This helps identify the correct vane specification and supports efficient processing of your enquiry. |
|
WHY CHOOSE VACAIR FOR KTA 80/4 CARBON VANES?
|
Since 1996
Vacuum pump specialists
|
Technical Help
Part identification
|
ISO 9001:2015
Quality management
|
OEM-Trained
Engineering support
|
The KTA 80/4 belongs to a family of Elmo Rietschle rotary vane pumps with several closely related model designations. Although some models use the same carbon vanes, selecting replacement parts by the complete pump model and OEM number is the safest approach.
VacAir identifies the KTA 80/4 replacement vane under reference VA523778, corresponding to OEM number 523778. Alternative manufacturer references 526886 and 523851 are also associated with this replacement specification.
A complete KTA 80/4 vane change requires six vanes measuring 130 × 52 × 5 mm. The 38 mm minimum permitted vane height gives maintenance personnel a useful measurement for assessing existing vane wear.
VacAir has supplied vacuum pump components since 1996, providing technical assistance, replacement spare parts and engineering services. Our operations are supported by an ISO 9001:2015 quality management system.
KTA 80/4 CARBON VANE QUESTIONS
How many vanes are required for a Rietschle KTA 80/4?
What are the KTA 80/4 carbon vane dimensions?
What is the minimum wear height for KTA 80/4 carbon vanes?
Which OEM numbers correspond to the KTA 80/4 vanes?
Are 526886 and 523851 alternative references for 523778?
Does the KTA 80/4 use the same vanes as the KTA 80/5?
Can VacAir assist with KTA 80/4 repairs and vane fitting?
Trust VacAir Superstore for all your vacuum pump needs.
Contact us for replacement vanes, spare parts, vacuum pumps and engineering support.
