VacAir Superstore stocks replacement carbon vanes for the Orion KHA 100 dry-running rotary vane vacuum pump. We supply the correct six-vane replacement quantity for routine servicing and repairs, supported by specialist vacuum pump knowledge, competitive pricing and UK and worldwide delivery.
Orion OEM Reference: 04030403010
VacAir Part Number: VA0430403010
Quantity Per Pump: 6 vanes
Vane Dimensions (L × H × T): 35 × 17 × 3.5 mm
Original Vane Height: 17 mm
Minimum Vane Height: ≈ 13 mm
Material: Replacement carbon vanes
Availability: IN STOCK
TRUSTED BY INDUSTRY FOR OVER 30 YEARS
NEED REPLACEMENT CARBON VANES?
Why waste time endlessly searching? Just give us a quick call.
No online checkout risk. No tedious forms.
Just a quick call with vacuum pump specialists
who know their products.
No Doubts – No Worries!
Get the right vanes at the right prices, with delivery arranged around how urgently you need them.
CALL THE EXPERTS NOW ☎ 0113 2088501 One quick call could save you time and money.Prefer to write to us?
✉ SEND AN ENQUIRY →URGENT ORDERS WELCOME
UK, European & Worldwide Supply
VacAir Superstore stocks and supplies replacement carbon vanes for the Orion KHA 100 dry-running rotary vane vacuum pump. Our replacement vanes are intended for industrial users, maintenance engineers and specialist pump repair companies requiring correctly identified components for routine servicing and repairs.
The Orion KHA 100 requires six replacement carbon vanes measuring 35 × 17 × 3.5 mm (L × H × T). VacAir supplies these under replacement code VA0430403010, corresponding to Orion OEM reference 04030403010. We can supply the complete six-vane quantity required for a full replacement.
Each new vane has an original height of 17 mm, with an approximate minimum height of ≈ 13 mm. Regular inspection and measurement can help engineers assess wear and identify when replacement should be considered.
Compact vane dimensions make accurate identification particularly important. At 35 mm long and 3.5 mm thick, these replacement carbon vanes must be correctly matched to the pump. The model designation, OEM reference and vane dimensions should be checked before fitting.
During operation, the carbon vanes move within the rotor slots and maintain contact with the cylinder running surface. Deposits within the slots, damaged running surfaces or contamination can restrict movement and contribute to premature wear or mechanical problems.
Inspect all six vanes during servicing. Compare their remaining heights and look for cracks, chipped corners, unusual wear patterns or damage. Before fitting replacements, remove carbon residue, debris and fragments from every rotor slot, and inspect the cylinder running surface.
VacAir has specialised in replacement carbon vanes since 1996. Our UK stockholding, experienced technical team and OEM-trained engineers enable us to assist with vane identification, fitting guidance and professional vacuum pump servicing.
Browse our Orion replacement carbon vane range or contact our vacuum pump engineering department for help with fitting, inspection and repairs.
TECHNICAL INFORMATION
|
ORION KHA 100 VANE FEATURES✓Replacement vanes for Orion KHA 100
✓Six matching vanes per pump
✓35 × 17 × 3.5 mm vane dimensions
✓Original vane height 17 mm
✓OEM reference 04030403010
✓UK stock and experienced engineering support
|
The Orion KHA 100 requires six replacement carbon vanes measuring 35 × 17 × 3.5 mm (L × H × T). Each vane has an original height of 17 mm and an approximate minimum height of ≈ 13 mm. All six vanes should be inspected during routine maintenance.
Check for wear and damage. Examine the running edges and corners for cracks, chips and uneven contact marks. Compare the remaining height of each vane and investigate significant differences across the complete set.
Before installing new vanes, clean all rotor slots thoroughly. The KHA 100 vanes are only 3.5 mm thick, so carbon deposits or contamination can restrict their movement. Remove all broken fragments and inspect the cylinder running surface for scoring or mechanical damage.
Orion KHA 100 inspection checklist:
|
✓ Inspect all six carbon vanes ✓ Measure remaining vane heights ✓ Examine the 35 mm running edges ✓ Check for cracks and chipped corners ✓ Compare wear across the complete set |
✓ Clean all six rotor slots ✓ Remove deposits and broken fragments ✓ Inspect cylinder surface condition ✓ Investigate abnormal wear patterns ✓ Confirm free movement in every slot |
CORRECT CARBON VANE ORIENTATIONWhen fitting the six Orion KHA 100 replacement carbon vanes, ensure all rotor slots are thoroughly cleaned and free from carbon residue, contamination or fragments of previously damaged vanes. The higher edge is the leading edge. The chamfer follows behind, as illustrated in the VacAir fitting diagram. Confirm the direction of rotor rotation and follow the manufacturer’s servicing instructions. Each replacement vane should slide smoothly within its rotor slot. Because these vanes are only 3.5 mm thick, even a small restriction may interfere with movement. Investigate the cause of any tightness rather than forcing a vane into position. Check the movement of the complete six-vane set before reassembly. VacAir’s experienced engineers can assist with fitting, inspection and mechanical repairs where required. |
|
VacAir Superstore supplies replacement carbon vanes and vacuum pump spare parts to industrial customers throughout the UK and overseas. In addition to replacement vanes, our team can investigate the availability of genuine OEM and aftermarket servicing components for Orion vacuum pumps, subject to the individual model and part requirements.
Our vacuum pump spare parts range includes:
For Orion KHA 100 replacement carbon vanes, quote OEM reference 04030403010 or VacAir replacement code VA0430403010. Each pump requires six vanes measuring 35 × 17 × 3.5 mm (L × H × T).
Correct part identification matters. Although replacement carbon vanes can appear similar, their dimensions and specifications must be suitable for the particular pump. VacAir’s experience supplying replacement vanes since 1996 helps customers identify the components they need and avoid unnecessary delays.
If your Orion KHA 100 requires additional servicing components, please provide the pump nameplate details and any available part numbers. Our team can investigate suitable replacements and advise on the availability of related spares.
VacAir’s engineering department provides professional replacement vane fitting, vacuum pump servicing and mechanical repairs. Our OEM-trained engineers have extensive experience with dry-running rotary vane vacuum pumps and understand the importance of thorough inspection and preparation before fitting replacement components.
Preparing the KHA 100 rotor. The pump requires six replacement carbon vanes measuring 35 × 17 × 3.5 mm (L × H × T). Before installing new vanes, each rotor slot should be cleaned thoroughly to remove carbon residue, contamination and debris that could restrict movement.
Assessing the existing vane set. Each new vane has an original height of 17 mm, with an approximate minimum height of ≈ 13 mm. Examine all six removed vanes for chipped corners, cracking and uneven wear. Differences between individual components may indicate restricted movement or internal mechanical problems.
Inspecting the cylinder running surface. Check the cylinder for scoring, unusual contact marks and damage. If the pump has experienced excessive noise, abnormal wear or premature vane failure, the underlying cause should be investigated before fitting replacements.
Ensuring free movement. The KHA 100 replacement vanes are only 3.5 mm thick. Even relatively small deposits within the rotor slots can interfere with their movement. Each vane should slide smoothly without being forced into position.
Removing debris following vane breakage. All fragments from damaged carbon vanes must be removed to avoid damage to the new components. Check the rotor slots and cylinder carefully, and confirm that the complete six-vane set moves freely before reassembly.
VacAir can provide practical guidance to customers undertaking their own maintenance or discuss professional workshop servicing and repairs. Our engineers can also investigate abnormal vane wear, internal damage and other mechanical problems affecting pump operation.
|
VacAir supplies Orion KHA 100 replacement carbon vanes throughout the UK and worldwide. Our customers include industrial maintenance departments, engineering businesses and specialist vacuum pump repair companies requiring correctly specified replacement components. Our UK vane stock includes the 35 × 17 × 3.5 mm (L × H × T) replacement carbon vanes supplied under VacAir part number VA0430403010, corresponding to Orion OEM reference 04030403010. Each KHA 100 pump requires six vanes, and our team can assist with supplying the complete replacement quantity. Order by 4pm – same-day despatch. Qualifying in-stock orders confirmed before 4pm on working days can be despatched the same day, subject to carrier arrangements. We offer competitive delivery services throughout the United Kingdom and arrange international shipping through established transport providers. Urgent requirements after 4pm? Please telephone us. We understand that unexpected pump downtime can interrupt production and will make exceptional efforts to investigate practical late collection or despatch arrangements. Same-day despatch after the normal cut-off cannot be guaranteed. Whether you are replacing worn vanes during planned maintenance or responding to an unexpected breakdown, our team can assist with component identification, delivery options and technical questions. We aim to provide straightforward information about the parts being supplied and the most practical delivery arrangements. For quotations, technical guidance or delivery enquiries, call 0113 2088501 or email sales@vacair-superstore.com. Please quote Orion KHA 100 or VA0430403010. |
|
|
Since 1996
Vane Supply
|
Technical Help
Part Identification
|
ISO 9001:2015
Quality Management
|
OEM-Trained
Engineers
|
Replacement carbon vane specialists since 1996. VacAir has supplied replacement carbon vanes to industrial customers, maintenance departments and vacuum pump repair companies for decades. Our experience helps customers identify the correct replacement components and obtain practical guidance when servicing their equipment.
UK stock and the correct quantity for your pump. The Orion KHA 100 requires six replacement carbon vanes measuring 35 × 17 × 3.5 mm (L × H × T). We supply these under VA0430403010, corresponding to Orion OEM reference 04030403010. Our team understands the importance of supplying the correct components and complete replacement quantity.
Deep vacuum pump expertise. We understand the operation of dry-running rotary vane vacuum pumps, including the importance of rotor slot cleanliness, vane orientation, unrestricted movement and cylinder condition. This knowledge enables us to provide practical technical assistance rather than simply supplying a replacement component.
Competitive pricing and our Price Promise. VacAir aims to offer excellent value on replacement carbon vanes. Our Price Promise applies to comparable new, in-stock replacement carbon vanes offered by UK suppliers for the same pump model and application, with comparable specification and quality. Genuine OEM products, clearance items, promotions, one-off and contract arrangements are excluded. Requests must be made at the quotation stage.
Customer satisfaction and externally audited quality systems. VacAir operates an ISO 9001:2015 certified quality management system, subject to external audit. Accurate product information, dependable customer service and honest commercial practices are important parts of maintaining our reputation and long-term customer relationships.
We do not fabricate product reviews, invent customer ratings or display artificial review scores on our website or provide them to search engines.
OEM-trained engineering support. Our experienced engineers can assist with replacement vane fitting, rotor slot cleaning, cylinder inspection, preventative servicing and mechanical repairs. We provide practical technical advice to customers undertaking their own maintenance and professional workshop assistance where required.
Responsive UK despatch and worldwide supply. Our UK vane stock supports planned maintenance and urgent requirements. Qualifying in-stock orders confirmed before 4pm on working days can be despatched the same day, with international delivery available through established carriers.
Customer satisfaction arrangements. Our 14-day return arrangement applies to unused products, subject to prior agreement. A restocking fee may apply, and non-stock special-order products are non-returnable. Please refer to our published policies for full conditions.
Trust VacAir Superstore for all your vacuum pump needs.
Contact us for replacement vanes, spare parts, vacuum pumps and engineering support.