Busch SV 1006 Replacement Carbon Vanes – 0722000065

BUSCH SV 1006 REPLACEMENT CARBON VANES

VacAir Superstore stocks, supplies and sells Busch SV 1006 replacement carbon vanes for dry-running rotary vane vacuum pump maintenance. We support industrial maintenance departments, engineering companies, equipment manufacturers and vacuum pump repair specialists requiring reliable replacement carbon vanes, competitive quotations and knowledgeable technical assistance.

The Busch SV 1006 uses four carbon vanes, each measuring 55 × 26 × 4 mm. The original Busch reference is 0722000065, also written as 722000065 without the leading zero. VacAir identifies the corresponding replacement carbon vane under part number VA722000065.

Carbon vanes are wearing components and should be examined during routine pump servicing. The SV 1006 vane has an original height of 26 mm, with a minimum permitted working height of 19 mm. Measuring the remaining height helps establish whether the vanes have reached their wear limit, while visual inspection can reveal cracking, uneven contact or other damage.

For a complete replacement, the SV 1006 requires four matching new vanes. We recommend examining all four together and checking the rotor slots and cylinder condition before installing the replacement set. This is particularly important where the pump has suffered poor vacuum performance or unexpected vane failure.

We also supply Busch vacuum pump spare parts and maintenance components. Customers who would prefer professional fitting or require assistance with a pump fault can contact our Busch pump servicing and repair department.

BUSCH SV 1006 VANE INSPECTION & REPLACEMENT

The Busch SV 1006 operates with four carbon vanes moving within the rotor slots. As the pump runs, these vanes gradually wear against the internal cylinder surface. Periodic inspection is important for identifying excessive wear, cracks, restricted movement and other conditions that could affect the pump’s performance.

Each new SV 1006 replacement vane measures 55 × 26 × 4 mm, with an original height of 26 mm. The minimum permitted vane height is 19 mm. Measuring all four vanes allows their remaining height to be assessed, but a thorough inspection should also consider the condition of the rotor, cylinder and inlet filtration.

Important SV 1006 inspection points:

CORRECT CARBON VANE ORIENTATION When replacing the carbon vanes in a Busch SV 1006, the orientation of each vane should be checked before reassembly. The correct relationship between the working edge, chamfer and rotor direction is important for reliable operation. The higher edge of the vane is the leading edge. The chamfer follows behind the leading edge, as illustrated in the VacAir installation diagram. Before inserting the four new vanes, examine the rotor slots and remove any accumulated carbon dust or debris. Check the internal running surfaces and ensure that the replacement vanes move freely within their slots. Always verify the pump’s direction of rotation and follow the manufacturer’s fitting instructions. Where unusual wear or mechanical damage is found, the cause should be investigated before the pump is returned to service. VacAir’s engineers can assist if professional fitting is required.

BUSCH SV 1006 SPARE PARTS

BUSCH SV 1006 VANE FITTING & PUMP SERVICING

VacAir Superstore supplies Busch SV 1006 replacement carbon vanes for customers carrying out their own maintenance. However, we also operate our own dedicated vacuum pump service department, with fully trained engineers available to fit the replacement vanes, inspect the pump and undertake servicing or repairs.

Professional vane fitting at highly competitive rates. Our engineers can replace the complete four-vane set in your SV 1006, examine the rotor and cylinder surfaces, and check for wear or damage that might affect the performance or service life of the new carbon vanes.

Complete servicing and mechanical repairs. Where additional work is needed, our service department can inspect filtration, bearings, seals and other internal components. If the pump has suffered poor vacuum performance or a mechanical fault, our engineers can investigate the cause and discuss suitable repair options.

We understand that vacuum pumps are often important to industrial production and that both downtime and maintenance costs matter. Whether you require routine vane fitting, preventative servicing or more extensive repair work, VacAir offers specialist engineering knowledge, fully trained personnel and highly competitive workshop rates.

BUSCH VANE FITTING, SERVICING & REPAIRS →

BUSCH SV 1006 CARBON VANES — UK & WORLDWIDE SUPPLY

WHY BUY BUSCH SV 1006 VANES FROM VACAIR?

Specialists in replacement carbon vanes since 1996. VacAir Superstore has spent decades supplying replacement vanes, vacuum pump spare parts and related equipment to industrial customers. Our experience means that customers purchasing Busch SV 1006 vanes can deal with an established specialist who understands the equipment and its maintenance requirements.

UK vane stock and the correct replacement quantity. We stock the 55 × 26 × 4 mm replacement carbon vane identified by Busch OEM 0722000065. The SV 1006 requires four matching vanes, and our spares team can help customers obtain the correct quantity without unnecessary delays or confusion over product identification.

Deep vacuum pump knowledge rather than a generic parts catalogue. VacAir is a specialist vacuum pump business. Our expertise extends beyond simply matching a part number: we understand carbon vane wear, filtration, internal pump components and the importance of correct fitting. Customers can discuss their requirements with people familiar with industrial vacuum equipment.

Competitive pricing backed by our Price Promise. We aim to provide replacement carbon vanes at attractive prices while retaining knowledgeable technical support. Our published Price Promise explains the conditions under which we will match a qualifying lower price for genuinely comparable replacement carbon vanes from another UK supplier.

Customer satisfaction and externally audited ISO 9001:2015 systems. VacAir operates an ISO 9001:2015 quality management system incorporating customer satisfaction monitoring and continual improvement. We believe that consistent service, accurate product information and honest advice provide a stronger foundation for customer confidence than unsupported marketing claims.

We do not fabricate product reviews, invent customer ratings or display artificial review scores on our website or provide them to search engines. We have no need to. Our products, expertise and reputation have supported customers across the pump industry for decades.

Our own service department and OEM-trained engineering support. Customers who prefer to fit their own SV 1006 vanes can purchase the replacement carbon directly from VacAir. Alternatively, our fully trained engineers can undertake professional vane fitting, preventative servicing, fault investigation and pump repairs at highly competitive rates.

Honest service and dependable UK and worldwide supply. We understand that customers need the right replacement components, competitive prices and delivery arrangements that reflect the urgency of their maintenance requirements. Our approach combines decades of experience, practical technical assistance, UK vane stock and international supply, helping businesses keep their vacuum equipment operating reliably.

BUSCH SV 1006 CARBON VANE QUESTIONS