Elmo Rietschle TR 60 Replacement Carbon Vanes – 515642
RIETSCHLE TR 60 REPLACEMENT CARBON VANES
VacAir Superstore supplies Elmo Rietschle TR 60 replacement carbon vanes for routine maintenance, planned servicing and urgent repairs. These carbon vanes correspond to Rietschle OEM reference 515642, measure 95 × 51 × 6 mm and are supplied for pumps requiring a complete set of six vanes.
Rietschle OEM reference: 515642
Extended OEM reference: 5156420000
VacAir reference: VA515642
Quantity required: 6 vanes per pump
Vane dimensions: 95 × 51 × 6 mm
Minimum vane height: 40 mm
Material: Carbon
Availability: In stock
NEED TR 60 VANES URGENTLY?
VacAir can assist with replacement TR 60 vanes, part identification and delivery options for urgent maintenance requirements.
Call: 0113 2088501
ELMO RIETSCHLE TR 60 REPLACEMENT CARBON VANES
VacAir Superstore supplies replacement carbon vanes for the Elmo Rietschle TR 60 dry-running rotary vane pump. Our replacement vanes offer a competitively priced solution for customers carrying out preventative maintenance, replacing worn components or restoring a pump to service following an unexpected breakdown.
The TR 60 requires six carbon vanes, each measuring 95 × 51 × 6 mm. The corresponding Rietschle OEM part number is 515642, also identified as 5156420000. VacAir supplies this replacement vane under reference VA515642.
During operation, the carbon vanes move within the rotor slots, forming part of the pump’s dry-running compression mechanism. As the vanes gradually wear, their remaining height must be checked during servicing. New TR 60 vanes have an original height of 51 mm, while the specified minimum permitted height is 40 mm. Regular inspections can help identify worn or damaged vanes before they cause more extensive problems.
The 515642 vane is shared with several other Rietschle TR 60 and TR 61 variants, although not all these pumps require the same quantity. The standard TR 60 uses six vanes, whereas the TR 60DV and TR 61DV require seven. VacAir can assist with correct part identification and supplies the replacement vanes, additional spare parts and engineering support needed for ongoing pump maintenance.
VacAir also supplies Elmo Rietschle spare parts and provides vacuum pump servicing and repairs through our experienced engineering team.
TECHNICAL INFORMATION
|
TR 60 VANE FEATURES✓Replacement carbon vanes for the Rietschle TR 60
✓Six vanes required for a complete replacement
✓95 × 51 × 6 mm replacement dimensions
✓40 mm minimum permitted vane height
✓Equivalent to Rietschle OEM reference 515642
✓VacAir supply and technical support
|
RIETSCHLE TR 60 VANE INSPECTION & REPLACEMENT
|
The six carbon vanes fitted to the Rietschle TR 60 experience gradual wear during normal operation. Checking their condition at recommended service intervals helps identify when replacement is necessary and provides an opportunity to inspect other internal pump components. Each new 515642 carbon vane measures 95 × 51 × 6 mm, with an original height of 51 mm. The specified minimum permitted vane height for the TR 60 is 40 mm. All six vanes should be measured individually, particularly if the pump has developed unusual noise, reduced performance or signs of uneven wear. TR 60 maintenance inspection checklist: ✓ Measure the remaining height of all six vanes ✓ Examine vane surfaces for chips, cracks or fractures ✓ Check that the vanes move freely within the rotor slots ✓ Inspect the pumping chamber for scoring or damage ✓ Assess the condition of the rotor and shaft ✓ Examine bearings for excessive wear or movement ✓ Check inlet filters and accumulated carbon dust ✓ Look for contamination, overheating or abnormal wear ✓ Investigate any evidence of broken or sticking vanes TR 60 minimum vane height: New vanes measure 51 mm high. The minimum permitted height is 40 mm. Replace worn vanes as a complete set of six, following the manufacturer’s maintenance instructions. Where vanes have broken or worn unevenly, investigate the underlying cause before fitting replacements.
|
General carbon vane installation and maintenance illustration.
|
ELMO RIETSCHLE TR 60 SPARE PARTS
|
VacAir supplies Rietschle TR 60 replacement carbon vanes and vacuum pump spare parts to support industrial maintenance and repair work. Our range includes replacement components for customers carrying out scheduled servicing and those responding to an unexpected pump failure. A TR 60 vane change is also an opportunity to assess the condition of the pump’s other service components. Inlet filtration, internal wear and the general operating condition of the pump should be considered when planning maintenance, particularly where equipment operates for extended periods. VacAir has supplied industrial vacuum pump spares since 1996. We can assist with part identification using the pump model, OEM reference or existing components. For additional spares, providing the pump serial number where available can help identify the appropriate parts. ✓ Rietschle 515642 replacement carbon vanes ✓ Air filters and routine service components ✓ Mechanical spare parts for maintenance and repairs ✓ Specialist assistance with pump part identification |
 |
TR 60 VANE FITTING & PUMP SERVICING
VacAir supplies the six Rietschle 515642 carbon vanes required for a complete TR 60 vane replacement. Our team can help customers identify the correct replacement components whether the work is being undertaken by an in-house maintenance department or an external service engineer.
Before installing new vanes, the old components should be inspected and measured against the 40 mm minimum permitted height. The rotor slots, internal cylinder surfaces, bearings and inlet filtration should also be checked for wear, damage or contamination that could affect the performance of the replacement vanes.
Where a TR 60 has suffered fractured vanes or a sudden reduction in performance, the cause should be investigated rather than assuming the vanes are the only components requiring attention. Excessive internal wear, damaged running surfaces or restricted airflow can contribute to further problems if left unresolved.
VacAir’s OEM factory-trained engineers provide professional vane fitting, planned vacuum pump maintenance, fault investigation and repairs. Customers can purchase replacement vanes directly from VacAir or discuss engineering assistance where specialist support is required.
TR 60 CARBON VANES — UK & WORLDWIDE SUPPLY
|
VacAir supplies Rietschle TR 60 replacement carbon vanes from our UK operation, supporting industrial customers, maintenance teams, distributors and specialist vacuum pump engineers requiring dependable replacement parts. Our delivery service covers the United Kingdom, Europe and destinations worldwide. For time-critical maintenance, we can discuss express courier services, collection from our Leeds trade counter and direct delivery arrangements, subject to the destination and carrier availability. When contacting us about replacement TR 60 vanes, quote Rietschle OEM number 515642 or VacAir reference VA515642. A complete TR 60 vane replacement requires six carbon vanes, each measuring 95 × 51 × 6 mm. If a breakdown has stopped your pump and replacement vanes are required urgently, telephone 0113 2088501 to discuss available stock and delivery options. |
|
WHY BUY RIETSCHLE TR 60 VANES FROM VACAIR?
|
Since 1996
Vane Supply
|
Technical Help
Part Identification
|
ISO 9001:2015
Quality Management
|
OEM-Trained
Engineers
|
Established vacuum vane supplier. Since 1996, VacAir has supplied replacement carbon vanes and spare parts for industrial vacuum pumps. Our customers include manufacturers, maintenance contractors, equipment distributors and specialist repair companies looking for reliable component supply.
Accurate TR 60 vane identification. The Rietschle TR 60 requires six 515642 carbon vanes measuring 95 × 51 × 6 mm. We recognise the differences between pump variants and can help customers distinguish six-vane models from related seven-vane configurations.
Replacement components from stock. VacAir supplies replacement carbon vanes for planned servicing and unexpected breakdowns. We understand the importance of obtaining the correct parts promptly when industrial vacuum equipment is essential to production.
Experienced technical assistance. Our team can work from Rietschle OEM numbers, VacAir references, pump models and vane dimensions to help identify replacement components. This is particularly useful when older pumps have limited documentation or customers are uncertain about the exact specification.
Engineering support beyond vane sales. VacAir’s OEM factory-trained engineers provide vacuum pump servicing, vane fitting, fault diagnosis and repair services. Customers benefit from dealing with a supplier that understands the equipment as well as the individual replacement parts.
Competitive pricing and international supply. We combine established industry experience with competitively priced replacement vanes and UK, European and worldwide delivery options. Whether you require one six-vane TR 60 set or recurring maintenance supplies, VacAir can assist.
RIETSCHLE TR 60 CARBON VANE QUESTIONS
Where can I buy Rietschle TR 60 replacement carbon vanes?
How many carbon vanes does a Rietschle TR 60 require?
What are the dimensions of Rietschle TR 60 carbon vanes?
What is the minimum permitted vane height for a TR 60?
What is the OEM part number for Rietschle TR 60 vanes?
Do all Rietschle pumps using 515642 vanes require six?
Should all six TR 60 carbon vanes be replaced together?
Can VacAir provide urgent delivery and TR 60 pump servicing?
Trust VacAir Superstore for all your vacuum pump needs.
Contact us for replacement vanes, spare parts, vacuum pumps and engineering support.
