VacAir supplies replacement Schmalz vacuum pumps across the UK with fast technical support, model identification and expert advice for vacuum lifting, handling, clamping, automation and industrial applications.
Many Schmalz-branded rotary vane vacuum pumps are manufactured by Becker as OEM equipment. Our team can identify the original Becker pump, supply the correct replacement or spare parts, and advise on a suitable alternative where appropriate.
We support Schmalz EVE-TR, EVE-TR-X and EVE-OG vacuum pumps, including dry-running and oil-lubricated rotary vane models.
Send the complete Schmalz model number, pump nameplate and installation photographs for rapid identification and quotation.

Whether you are based in Leeds, The Midlands, The North West, Greater Manchester, Yorkshire & Humberside, The North East, Wales, Scotland, Ireland or anywhere in between VacAir provides reliable UK-wide Schmalz pump supply and technical support. We help customers minimise downtime by identifying the fitted pump and finding the most practical replacement.

VacAir also supplies Schmalz replacement vacuum pumps, vanes, filters and spare parts for international export, with practical support for identifying OEM Becker equivalents and arranging overseas supply.
The fastest way for us to identify and quote the correct pump is to send:
This allows our team to determine whether the pump is a Becker OEM model and advise whether the best route is a direct replacement, a Becker equivalent, repair, spare parts or a lower-cost alternative.
VacAir combines pump identification knowledge with practical technical support before and after sale.
Whether you need an exact Schmalz replacement or the most cost-effective equivalent, our team can help.
Some customers know the exact Schmalz model they need. Others need help identifying the Becker pump beneath the Schmalz label or comparing replacement options.
Many Schmalz EVE-TR and EVE-TR-X dry-running rotary vane pumps are Becker pumps supplied under Schmalz model numbers.
This knowledge helps with pump identification and parts selection, but the complete Schmalz suffix, motor, mounting, ports and duty must still be checked because OEM versions can differ from the standard Becker configuration.
Schmalz EVE-OG oil-lubricated pumps can also be assessed against the corresponding pump technology and suitable replacement ranges.
The table below lists commonly encountered Schmalz EVE models, the typical Becker OEM pump and a possible DVP comparison.
| Schmalz model or series | Pump technology | Typical DVP comparison |
|---|---|---|
| EVE-TR 4 | Becker VT 4.4 Dry-running rotary vane | DVP SC5 |
| EVE-TR 8 | Becker VT 4.8 Dry-running rotary vane | DVP SC8 |
| EVE-TR 10 | Becker VT 4.10 Dry-running rotary vane | DVP SB10 |
| EVE-TR 25 | Becker VT 4.25 Dry-running rotary vane | DVP SC25 |
| EVE-TR 40 | Becker VT 4.40 Dry-running rotary vane | DVP SC40 |
| EVE-TR 60 | Becker KVT 3.60 Dry-running rotary vane | DVP SC60 |
| EVE-TR 80 | Becker KVT 3.80 Dry-running rotary vane | DVP SC80 |
| EVE-TR 100 | Becker KVT 3.100 Dry-running rotary vane | DVP SC100 |
| EVE-TR 140 | Becker KVT 3.140 Dry-running rotary vane | DVP SC140 |
| EVE-TR-X 40 | Becker VX 4.40 Dry-running rotary vane | DVP SC40 |
| EVE-TR-X 100 | Becker KVX 3.100 Dry-running rotary vane | DVP SC100 |
| EVE-TR-X 140 | Becker KVX 3.140 Dry-running rotary vane | DVP SC140 |
| EVE-TR 250 / EVE-TR 360 | Becker VTLF 2.250 / 2.360 Dry-running rotary vane | DVP VB315 |
| EVE-OG Series | Oil-lubricated rotary vane | DVP LC or MD series |
Important: These are comparison starting points, not guaranteed drop-in replacements. The exact Schmalz suffix, electrical details, mounting, port position, vacuum level and continuous-duty requirements must be confirmed before ordering.
Schmalz EVE-TR and EVE-TR-X pumps are commonly used where clean, oil-free vacuum is required. Typical applications include vacuum lifting, handling, CNC clamping, packaging, printing, automation and pick-and-place systems.
These pumps use carbon vanes that wear gradually during service. Reduced vacuum, increased evacuation time, noise or vane dust may indicate that inspection or maintenance is required.
Schmalz EVE-OG pumps use oil-lubricated rotary vane technology for applications requiring a deeper vacuum level than a typical dry-running pump.
Correct oil, exhaust filtration, inlet filtration and service intervals are important. Replacement selection must consider ultimate vacuum, pumping speed, duty, motor and installation arrangement.
VacAir supports Schmalz-branded pumps throughout their working life.
Workshop inspection, repair and overhaul for dry-running and oil-lubricated pumps. View servicing
Replacement components for current, older and obsolete pump models. View spare parts
Precision replacement carbon vanes for commonly used Schmalz EVE pumps. View carbon vanes
Inlet filters, exhaust filters and associated filtration components. View filters
Schmalz vacuum pumps are used across a wide range of industrial handling and automation systems, including:
The correct replacement must provide the required pumping speed, vacuum level and continuous-duty performance while remaining compatible with the machine controls, safety systems and installation.
Many Schmalz EVE-TR and EVE-TR-X rotary vane pumps are manufactured by Becker and supplied as OEM equipment under Schmalz model numbers. Other Schmalz pump technologies may have different origins, so the complete nameplate should always be checked.
Usually, yes. Send the complete Schmalz nameplate, motor plate and installation photographs. We can compare the model with known Becker ranges and confirm the most likely replacement route.
Yes. VacAir provides workshop inspection, servicing and overhaul for many Schmalz-branded rotary vane pumps, subject to model, condition and parts availability.
Yes. We supply carbon vanes for many Schmalz EVE pumps, particularly models based on Becker dry-running rotary vane pumps.
Possible causes include worn vanes, blocked filters, air leaks, damaged seals, a slipping drive, incorrect rotation or pump wear. Because lifting systems are safety-critical, the complete system should be assessed before further use.
Often yes, provided the replacement meets the required flow, vacuum, continuous duty, electrical, dimensional and safety requirements. Selection should not be based on nominal capacity alone.
Send us the full model number, pump and motor nameplates, and clear photographs of the installation.
Request a Schmalz pump quotation or identification
Tel: 0113 208 8501 Email: sales@vacair-superstore.com
