Rietschle CLFT 26 Replacement Carbon Vanes – 507106
RIETSCHLE CLFT 26 REPLACEMENT CARBON VANES
VacAir Superstore stocks replacement carbon vanes for the Elmo Rietschle CLFT 26 dry-running rotary vane pump. Identified by OEM 507106, each vane measures 120 × 27 × 4 mm. The CLFT 26 requires eight vanes per pump, with a 22 mm minimum permitted vane height.
Rietschle OEM reference: 507106
Extended OEM reference: 5071060000
VacAir reference: VA507106
Quantity required: 8 vanes per pump
Vane dimensions: 120 × 27 × 4 mm
Minimum vane height: 22 mm
Material: Carbon
Availability: IN STOCK
ELMO RIETSCHLE CLFT 26 REPLACEMENT CARBON VANES
VacAir Superstore stocks Rietschle CLFT 26 replacement carbon vanes for dry-running rotary vane pump maintenance. Identified by OEM number 507106, these replacement vanes are supplied to engineers, industrial maintenance teams and pump service businesses needing reliable vanes and components.
The CLFT 26 is fitted with eight carbon vanes, each measuring 120 × 27 × 4 mm. VacAir lists the replacement as VA507106; the corresponding Rietschle references are 507106 and 5071060000. Confirm the pump model when arranging a full set.
With use, the carbon vanes move within the rotor slots and wear progressively against the pump running surface. The original vane height is 27 mm, while the CLFT 26 minimum wear height is 22 mm. Measuring the vanes during maintenance helps establish whether the set is approaching its replacement limit.
The CLFT 26 and CLFT 25 use the same 507106 vane specification and each requires eight vanes per pump. This commonality simplifies part selection, but the condition of the individual pump should still be assessed during servicing.
VacAir can also assist with Rietschle replacement parts and vacuum pump repairs and maintenance where the CLFT 26 requires additional attention.
TECHNICAL INFORMATION
|
CLFT 26 VANE FEATURES✓Carbon vanes for the Rietschle CLFT 26 pump
✓Eight vanes for a complete replacement
✓120 × 27 × 4 mm replacement dimensions
✓22 mm minimum permitted vane height
✓Cross-reference to Rietschle OEM 507106
✓VacAir part identification and technical support
|
RIETSCHLE CLFT 26 VANE INSPECTION & REPLACEMENT
|
Routine examination of the eight vanes in a CLFT 26 allows engineers to assess wear before it develops into a breakdown. The inspection should cover the carbon components as well as the rotor slots and internal pump surfaces. The replacement size is 120 × 27 × 4 mm, giving a new vane height of 27 mm. The 22 mm minimum permitted height is an important service measurement. Check all eight vanes for cracks, chipped corners, uneven contact and unrestricted movement. CLFT 26 maintenance inspection checklist: ✓ Measure the height of all eight carbon vanes ✓ Inspect vane edges for chips or fractures ✓ Check that the vanes slide freely in the rotor slots ✓ Examine the cylinder wall for scoring or damage ✓ Inspect the rotor and shaft condition ✓ Check bearings for excessive wear or movement ✓ Inspect inlet filtration and accumulated carbon dust ✓ Check for contamination or evidence of overheating ✓ Investigate any abnormal or uneven vane wear
CLFT 26 minimum vane height: New vanes are 27 mm high, with a minimum permitted height of 22 mm. Replace worn vanes as a complete set of eight, following the manufacturer’s maintenance instructions. Investigate damage or abnormal wear before installing replacements.
|
General carbon vane installation and inspection illustration.
|
ELMO RIETSCHLE CLFT 26 SPARE PARTS
|
VacAir supplies CLFT 26 carbon vanes, filters and associated Rietschle pump spares for scheduled servicing and unplanned repairs. We can assist customers working from a pump designation, an existing vane or an OEM part reference. A vane change provides an opportunity to inspect the pump internally. Pay particular attention to accumulated carbon dust, worn bearings, scoring of the cylinder and the ability of each vane to move in its rotor slot. Identifying the cause of damage helps protect the replacement set. VacAir has supplied replacement vacuum pump components since 1996. For CLFT 26 vane identification, provide the pump model together with 507106, 5071060000 or VacAir reference VA507106. ✓ Rietschle 507106 replacement carbon vanes ✓ Inlet filters and maintenance components ✓ Vacuum pump spare parts and repair support ✓ Technical assistance identifying correct parts |
 |
CLFT 26 VANE FITTING & PUMP SERVICING
For a full Rietschle CLFT 26 vane replacement, VacAir supplies eight 507106 carbon vanes. Customers may fit the parts through their own maintenance teams or use our vacuum pump engineering services.
Before installing the new set, measure the removed vanes against the 22 mm minimum wear height. Clean and examine the rotor slots, inspect the internal running surfaces and check bearings and inlet filtration for defects that could affect service life.
Premature failure, fractured vanes, vibration or reduced vacuum performance should prompt a closer examination of the machine. Replacing carbon alone may not solve a fault caused by mechanical wear, contamination or restricted movement.
VacAir provides access to OEM factory-trained engineers for fitting, fault investigation, preventative maintenance and pump repair, alongside the supply of replacement carbon vanes.
CLFT 26 CARBON VANES — UK & WORLDWIDE SUPPLY
|
From our Leeds operation, VacAir supplies replacement carbon vanes for the CLFT 26 to factories, maintenance contractors, service engineers and industrial vacuum pump users across the UK. We also serve customers in Europe and further afield, using established delivery carriers. Our team can discuss shipping and collection arrangements for both planned maintenance and urgent breakdown requirements. When requesting CLFT 26 vanes, identify the pump as CLFT 26 and quote Rietschle 507106 or VacAir VA507106. The pump takes eight vanes measuring 120 × 27 × 4 mm, also used in the CLFT 25. For stock enquiries, identification help or delivery options, telephone VacAir on 0113 2088501. |
|
WHY BUY RIETSCHLE CLFT 26 VANES FROM VACAIR?
|
Since 1996
Vane Supply
|
Technical Help
Part Identification
|
ISO 9001:2015
Quality Management
|
OEM-Trained
Engineers
|
Specialists in vacuum pump replacement parts. VacAir has worked with industrial pump users since 1996, combining vane supply with practical experience of pump servicing and component identification.
CLFT 26-specific replacement guidance. We identify the correct 507106 vane size of 120 × 27 × 4 mm and the eight pieces required for a complete pump change.
Replacement carbon vanes in stock. Our UK vane range supports preventative maintenance schedules as well as repairs when production equipment is unexpectedly out of service.
Clear part-number cross-referencing. Our team can work from the CLFT 26 model, Rietschle 507106 or 5071060000, and VacAir VA507106 to assist accurate selection.
Maintenance expertise when needed. Beyond supplying carbon vanes, our OEM-trained engineers can investigate abnormal wear, fit replacement components and carry out vacuum pump repairs.
Support for domestic and export customers. VacAir arranges vane supply from Leeds to destinations throughout the UK, Europe and worldwide.
RIETSCHLE CLFT 26 CARBON VANE QUESTIONS
Where can I obtain CLFT 26 replacement carbon vanes?
How many carbon vanes are fitted to a Rietschle CLFT 26?
What dimensions should CLFT 26 replacement vanes have?
What is the CLFT 26 minimum vane wear height?
Which Rietschle part number identifies the CLFT 26 vane?
Do CLFT 25 and CLFT 26 pumps take the same vanes?
What checks should be made when changing CLFT 26 vanes?
Can VacAir help with CLFT 26 vane fitting and urgent supply?
Trust VacAir Superstore for all your vacuum pump needs.
Contact us for replacement vanes, spare parts, vacuum pumps and engineering support.
