Rietschle CLFT 40 Replacement Carbon Vanes – 507107
RIETSCHLE CLFT 40 REPLACEMENT CARBON VANES
VacAir Superstore stocks Rietschle CLFT 40 replacement carbon vanes for dry-running rotary vane pump maintenance. Supplied under OEM reference 507107, each carbon vane measures 190 × 27 × 4 mm. We supply the eight vanes required per CLFT 40 pump for scheduled servicing and repairs, with a 22 mm minimum working height.
Rietschle OEM reference: 507107
Extended OEM reference: 5071070000
VacAir reference: VA507107
Quantity required: 8 vanes per pump
Vane dimensions: 190 × 27 × 4 mm
Minimum vane height: 22 mm
Material: Carbon
Availability: IN STOCK
ELMO RIETSCHLE CLFT 40 REPLACEMENT CARBON VANES
VacAir Superstore stocks and supplies Rietschle CLFT 40 replacement carbon vanes for servicing dry-running rotary vane pumps. Our 507107 carbon vanes are available for industrial maintenance teams, vacuum pump engineers and service companies requiring dependable replacement parts.
A Rietschle CLFT 40 uses eight carbon vanes, each sized 190 × 27 × 4 mm. VacAir supplies these under reference VA507107, corresponding to OEM 507107 and the extended number 5071070000. A full service requires eight replacement pieces.
During operation, carbon vanes slide within the CLFT 40 rotor and gradually reduce in height. New vanes are 27 mm high; the specified minimum working height is 22 mm. Routine checks of all eight vanes help prevent excessive wear and unplanned downtime.
The CLFT 40 and CLFT 41 share the same 507107 carbon vane and each uses eight. The related VFT 40 also uses this vane size but requires only four, so the complete set quantity must match the pump.
VacAir can also assist with Rietschle replacement parts and vacuum pump repairs and maintenance where the CLFT 40 requires additional attention.
TECHNICAL INFORMATION
|
CLFT 40 VANE FEATURES✓Carbon vanes for the Rietschle CLFT 40 pump
✓Eight vanes for a complete replacement
✓190 × 27 × 4 mm replacement dimensions
✓22 mm minimum permitted vane height
✓Cross-reference to Rietschle OEM 507107
✓VacAir part identification and technical support
|
RIETSCHLE CLFT 40 VANE INSPECTION & REPLACEMENT
|
Inspecting the eight carbon vanes in the CLFT 40 at scheduled maintenance intervals helps keep the pump running reliably. Remove the vanes carefully, measure each one and examine the rotor chamber for damage or debris before fitting replacements. Each new CLFT 40 vane measures 190 × 27 × 4 mm. With 27 mm initial height and a 22 mm minimum working limit, vane measurement is an essential part of servicing. Look for cracking, chipped edges, uneven wear and any vane that sticks in its slot. CLFT 40 maintenance inspection checklist: ✓ Measure the height of all eight carbon vanes ✓ Inspect vane edges for chips or fractures ✓ Check that the vanes slide freely in the rotor slots ✓ Examine the cylinder wall for scoring or damage ✓ Inspect the rotor and shaft condition ✓ Check bearings for excessive wear or movement ✓ Inspect inlet filtration and accumulated carbon dust ✓ Check for contamination or evidence of overheating ✓ Investigate any abnormal or uneven vane wear
CLFT 40 minimum vane height: New vanes are 27 mm high, with a minimum permitted height of
|
General carbon vane installation and inspection illustration.
|
ELMO RIETSCHLE CLFT 40 SPARE PARTS
|
VacAir stocks CLFT 40 carbon vanes, inlet filters and Rietschle spare parts for planned overhauls and breakdown repairs. The 507107 replacement vane is available for customers fitting their own parts or arranging a service through VacAir. When replacing a CLFT 40 vane set, clean away carbon dust and check the inlet filter, rotor slots, bearings and cylinder wall. Scratches, binding vanes or unusual wear patterns can shorten the life of new carbon vanes unless the cause is corrected. Since 1996, VacAir has supplied carbon pump vanes and maintenance components to industrial customers. For the CLFT 40 we stock the 507107 / 5071070000 vane, sold as VacAir VA507107, with eight pieces required for a complete change. ✓ Rietschle 507107 replacement carbon vanes ✓ Inlet filters and maintenance components ✓ Vacuum pump spare parts and repair support ✓ Technical assistance identifying correct parts |
 |
CLFT 40 VANE FITTING & PUMP SERVICING
VacAir supplies the eight 507107 carbon vanes needed for a complete Rietschle CLFT 40 replacement. Customers can obtain the parts for in-house servicing or arrange professional fitting by our engineering team.
Before new vanes are installed, check the old set against the 22 mm minimum height and inspect the pump for dust build-up, worn rotor slots, damaged running surfaces and bearing play. Correcting these issues can help protect the new vanes.
If vanes have fractured or worn unevenly, inspect the CLFT 40 thoroughly before restarting it. Restricted rotor slots, contaminated air, overheating or mechanical damage can cause another failure even after a new set has been fitted.
Alongside our stock of replacement vanes, VacAir offers OEM factory-trained engineers for carbon vane fitting, pump servicing, fault finding and repairs where customers require additional support.
CLFT 40 CARBON VANES — UK & WORLDWIDE SUPPLY
|
VacAir supplies CLFT 40 replacement carbon vanes from Leeds to manufacturers, engineering firms and maintenance departments across the UK. Our stock supports both planned service work and urgent requests when a pump is out of operation. Customers in Europe and worldwide can also obtain our replacement vanes. We use established carriers and can discuss express despatch or collection arrangements for time-critical maintenance requirements. For a CLFT 40 replacement set, order eight 507107 carbon vanes, each 190 × 27 × 4 mm, VacAir reference VA507107. The CLFT 41 uses eight of the same vanes, while the VFT 40 requires only four. For stock enquiries, identification help or delivery options, telephone VacAir on 0113 2088501. |
|
WHY BUY RIETSCHLE CLFT 40 VANES FROM VACAIR?
|
Since 1996
Vane Supply
|
Technical Help
Part Identification
|
ISO 9001:2015
Quality Management
|
OEM-Trained
Engineers
|
Carbon vane supply since 1996. VacAir has supplied replacement vanes and vacuum pump spares for decades, helping customers obtain the parts they need to keep equipment operating.
Complete CLFT 40 vane sets. We stock 507107 carbon vanes measuring 190 × 27 × 4 mm, with eight required for this particular Rietschle model.
Vanes available from UK stock. Our replacement carbon vane range supports routine servicing and rapid replacement after unexpected pump failures.
OEM 507107 replacement supply. Order using the Rietschle 507107 / 5071070000 numbers or VacAir VA507107; we supply the matching CLFT 40 vanes.
Vane fitting and pump repair. Our OEM-trained engineers can fit new vanes, inspect damaged components and carry out servicing when required.
UK and international deliveries. We supply CLFT 40 vanes to customers throughout Britain, Europe and further afield, with delivery options to suit the requirement.
RIETSCHLE CLFT 40 CARBON VANE QUESTIONS
Where can I purchase Rietschle CLFT 40 carbon vanes?
How many replacement vanes does the CLFT 40 pump need?
What size are the CLFT 40 507107 carbon vanes?
When should CLFT 40 vanes be replaced?
What is the OEM reference for CLFT 40 vanes?
Do CLFT 40, CLFT 41 and VFT 40 use identical vanes?
What should engineers inspect during CLFT 40 vane servicing?
Does VacAir stock CLFT 40 vanes and offer fitting?
Trust VacAir Superstore for all your vacuum pump needs.
Contact us for replacement vanes, spare parts, vacuum pumps and engineering support.
