Elmo Rietschle DTA 50 Replacement Carbon Vanes – 523880
RIETSCHLE DTA 50 REPLACEMENT CARBON VANES
VacAir Superstore stocks replacement carbon vanes for the Rietschle DTA 50 dry-running rotary vane compressor. For a full replacement, order six 160 × 37 × 4 mm vanes, identified by Rietschle OEM number 523880. The DTA 50 has a 27 mm minimum working vane height. Our UK stock supports routine maintenance and urgent parts requirements.
Rietschle OEM reference: 523880
Extended OEM reference: 5238800000
VacAir reference: VA523880
Quantity required: 6 vanes per pump
Vane dimensions: 160 × 37 × 4 mm
Minimum vane height: 27 mm
Material: Carbon
Availability: IN STOCK
ELMO RIETSCHLE DTA 50 REPLACEMENT CARBON VANES
Rietschle DTA 50 carbon vanes available from VacAir Superstore. We supply replacement carbon for the DTA 50 dry-running rotary vane compressor, helping production sites and maintenance contractors obtain the right parts for a scheduled overhaul or a repair that cannot wait.
For the DTA 50, order a complete set of six vanes. Each replacement measures 160 × 37 × 4 mm and is identified by Rietschle reference 523880, also written 5238800000. VacAir stock reference VA523880 provides a straightforward ordering identifier.
The new vane measures 37 mm in height. Your confirmed 27 mm minimum working height is the limit to consider during inspection; broken corners, unusual scoring or sticking in a rotor slot may justify replacement before that measurement is reached.
The DTA 50 is commonly maintained as part of a wider plant service programme. Having the six-vane quantity ready, along with any required filtration or additional spares, helps engineers complete the work without an avoidable delay. This page is specific to the DTA 50; the 523880 master page carries shared vane information.
Beyond carbon vanes, VacAir supplies Rietschle filters and maintenance parts. Our vacuum pump and compressor engineering team can also assist where a service reveals damage or the need for more extensive repair.
TECHNICAL INFORMATION
|
DTA 50 VANE FEATURES✓ Replacement carbon vanes for the Rietschle DTA 50
✓ Six vanes for a full DTA 50 rotor change
✓ 160 × 37 × 4 mm carbon vane dimensions
✓ 27 mm model-specific minimum working height
✓ Rietschle reference 523880 / 5238800000
✓ Stocked by a specialist vacuum pump supplier
|
RIETSCHLE DTA 50 VANE INSPECTION & REPLACEMENT
|
Before servicing the Rietschle DTA 50, isolate the equipment and follow the manufacturer’s procedure. Remove and assess the six carbon vanes as a group. Differences in length or surface condition between rotor positions can indicate uneven running rather than ordinary gradual wear. Compare each removed vane with the new 160 × 37 × 4 mm specification. The new height is 37 mm and the minimum working height is 27 mm. Examine the entire 160 mm length for edge damage and ensure that the pump internals are fit to receive a fresh set. Practical checks for a DTA 50 vane change: ✓ Measure the remaining height of all six vanes ✓ Compare wear patterns across the six rotor positions ✓ Look for broken ends, fractures or chipped carbon ✓ Check free vane travel in each rotor slot ✓ Examine the cylinder running face for marks or scoring ✓ Inspect the rotor and shaft for visible damage ✓ Check bearing condition and unusual movement ✓ Review the inlet filter and signs of restriction ✓ Remove loose carbon fragments using approved methods ✓ Investigate overheating, contamination or irregular wear DTA 50 wear reference: New vane height 37 mm; minimum working height 27 mm. Inspect the complete six-vane set and follow Rietschle service instructions.
|
 |
ELMO RIETSCHLE DTA 50 SPARE PARTS
|
Get DTA 50 replacement carbon vanes and associated parts from one specialist. VacAir stocks the 523880 carbon vane and supplies filters and other Rietschle service components. Buying the complete six-vane set ahead of maintenance can simplify the purchasing process. A carbon vane replacement is also an opportunity to check the condition of the machine. Filtration problems, accumulated dust, worn bearings or damaged internal surfaces can shorten the life of a new set if they are not addressed. VacAir has supplied industrial vacuum pump parts since 1996. Our team can support routine orders for 160 × 37 × 4 mm DTA 50 vanes as well as enquiries involving other parts or a compressor requiring repair. ✓ Rietschle 523880 carbon vane supply ✓ Filters and related service consumables ✓ Replacement pump and compressor components ✓ Technical and engineering assistance |
 |
DTA 50 VANE FITTING & PUMP SERVICING
When a DTA 50 is due for new carbon vanes, VacAir can supply the six 523880 vanes needed for a full change. Customers with their own maintenance engineers can order the parts; fitting and servicing assistance is also available from our team.
Use the 27 mm minimum height as one part of the inspection, not the only test. The condition of the rotor slots, running surfaces and filtration matters just as much when preparing a compressor to operate with new carbon.
If the removed vanes show breakage or markedly different wear, investigate the reason before reassembly. Excessive dust, damaged surfaces, bearing issues or a vane that cannot move freely may require additional work.
VacAir brings together UK vane stock and OEM-trained engineering experience. That means you can source the replacement carbon directly while retaining the option of specialist fault finding, workshop repairs or scheduled servicing.
DTA 50 CARBON VANES — UK & WORLDWIDE SUPPLY
|
VacAir supplies Rietschle DTA 50 replacement vanes from our Leeds base to businesses across the UK. Whether you maintain one compressor or manage spare parts for multiple production lines, we can supply the carbon vane required for the DTA 50. We also handle export orders for customers in Europe and other worldwide locations. For urgent requirements, discuss available courier services or collection arrangements with our sales team before placing the order. When enquiring, quote DTA 50, Rietschle 523880 or 5238800000, and the six-vane quantity. Each vane is 160 × 37 × 4 mm, with a 27 mm minimum working height. For prices and delivery options, telephone 0113 2088501 or email sales@vacair-superstore.com. |
 |
WHY BUY RIETSCHLE DTA 50 VANES FROM VACAIR?
|
Since 1996
Vane Supply
|
Technical Help
Part Identification
|
ISO 9001:2015
Quality Management
|
OEM-Trained
Engineers
|
Vacuum pump vane specialists since 1996. Our experience is built on supplying replacement parts for working industrial vacuum equipment, not simply offering a list of product codes. DTA 50 buyers can deal with a supplier who understands why accurate parts supply and dependable delivery matter to plant operations.
523880 vanes held in UK stock. VacAir stocks the 160 × 37 × 4 mm carbon vane required for the DTA 50. With six vanes per compressor, customers can organise a complete replacement set for planned maintenance or a breakdown without searching for individual pieces.
We understand pumps and compressors, not just carbon vanes. Since 1996, our group has worked in vacuum pump sales, parts and engineering. We understand the equipment, its service demands and the effect of downtime. You are buying from an established industry specialist rather than a general catalogue seller with no pump background.
Competitive replacement vane prices and a Price Promise. We work to combine sensible pricing with reliable parts supply and informed customer service. Our published VacAir Price Promise terms explain the conditions for comparing genuinely equivalent UK offers.
Customer satisfaction is central to our approach. VacAir’s ISO 9001:2015 certified quality management system includes customer satisfaction monitoring and a commitment to continual improvement. External audits provide additional scrutiny of those processes.
We do not fabricate product reviews, invent customer ratings or display artificial review scores on our website or provide them to search engines. We have no need to. Our products, expertise and reputation have supported customers across the pump industry for decades.
Experienced engineers are available when required. A compressor with broken carbon, abnormal wear or damaged running surfaces may need more than replacement vanes. Our OEM-trained engineers can support inspections, fitting, diagnosis, preventative servicing and repairs.
A long-established UK supplier serving customers worldwide. We combine stocked replacement carbon vanes, knowledgeable people and ISO 9001:2015 quality systems with UK and international supply. Our aim is to make buying DTA 50 vanes straightforward, fairly priced and supported by a business that stands behind its service.
RIETSCHLE DTA 50 CARBON VANE QUESTIONS
Where can I source Rietschle DTA 50 replacement vanes?
How many vanes are fitted in a Rietschle DTA 50?
What dimensions should DTA 50 carbon vanes have?
What is the DTA 50 minimum permitted vane height?
What part number identifies the DTA 50 vane?
Should the six DTA 50 vanes be renewed together?
What else should be inspected when changing DTA 50 vanes?
Can VacAir supply spares or servicing as well as DTA 50 vanes?
Trust VacAir Superstore for all your vacuum pump needs.
Contact us for replacement vanes, spare parts, vacuum pumps and engineering support.
