Becker WN124-162 Vanes, 90134900007

IDENTIFYING BECKER VANE WN 124-162

BECKER PUMP COMPATIBILITY

Becker WN 124-162 vanes are fitted to the following Becker dry-running rotary vane vacuum pump models. Select a model below to view its model-specific vane information.

REPLACING BECKER WN 124-162 CARBON VANES

VacAir Superstore supplies Becker WN 124-162 replacement carbon vanes for the DT3.25, DT4.25, T3.25DSK, T4.25DSK, VT3.25 and VT4.25 dry-running rotary vane pumps. These carbon graphite components gradually wear as the pump operates, making periodic inspection an important part of planned maintenance. Replacing worn vanes before they become excessively short can help maintain performance and reduce the likelihood of damage or unexpected production interruptions.

A new WN 124-162 vane measures 63 × 43 × 4 mm, with an original height of 43 mm. The specified minimum wear height is 28 mm. During servicing, measure the remaining height of each vane and inspect its edges and running surfaces for cracks, chipping, unusual wear or other signs that the pump may require further attention.

The compatible Becker DT, T and VT models listed on this page each require seven replacement carbon vanes, corresponding to Becker OEM reference 90134900007. Where the pump has been operating under demanding conditions, or a vane has broken, inspect the cylinder and rotor carefully before fitting the replacement set. Simply installing new carbon without correcting the cause of abnormal wear can lead to further problems.

WN 124-162 maintenance inspection checklist:

CORRECT CARBON VANE ORIENTATION When fitting Becker WN 124-162 replacement carbon vanes, ensure the rotor slots are clean and free from debris. Each vane must be able to slide smoothly within its slot without binding. Carbon dust, damaged slots or fragments from broken vanes can restrict movement and contribute to premature wear. The higher edge of the vane is the leading edge. The chamfer follows behind the leading edge, as shown in the adjacent VacAir fitting diagram. Check the actual vane profile and confirm the correct orientation for the particular pump’s direction of rotation before installation. The Becker DT3.25, DT4.25, T3.25DSK, T4.25DSK, VT3.25 and VT4.25 models listed here require a complete seven-vane set. Before fitting new carbon, examine the cylinder running surface, rotor and bearings. Where previous vanes have worn unevenly, fractured or shown signs of overheating, identify the cause before returning the pump to service. Always follow the relevant Becker manufacturer’s maintenance and fitting instructions. VacAir’s experienced engineers can provide guidance on vane identification, professional fitting, pump inspection and mechanical repairs where required.

UK, EUROPEAN & WORLDWIDE VANE SUPPLY

WHY BUY REPLACEMENT BECKER VANES FROM VACAIR?

Specialists in replacement carbon vanes since 1996. VacAir has spent three decades supplying replacement vacuum pump vanes, spare parts and technical assistance to industrial customers, engineering departments, OEMs, distributors and specialist pump service companies. We understand that reliable equipment depends on the correct components and that customers need a supplier who can combine technical knowledge, dependable availability and competitive prices.

Becker WN 124-162 replacement vanes from UK stock. VacAir stocks the 63 × 43 × 4 mm carbon graphite vane identified by WN 124-162, under our own reference VA901349. The associated Becker OEM reference 90134900007 identifies the seven-vane set used in the compatible DT, T and VT pumps listed on this page. Our team can assist with vane identification and quantity confirmation, helping customers obtain the correct components for maintenance or repair.

More than 40 years of combined former Becker UK agent experience. Our senior team brings extensive first-hand knowledge of Becker vacuum pumps, their applications and maintenance requirements. We can discuss vane wear, filtration, rotor condition and the possible causes of premature carbon failure. VacAir is a specialist vacuum pump business, not a generic parts catalogue that simply lists part numbers without understanding the machinery.

Competitive replacement vane prices backed by our Price Promise. We work hard to offer high-quality replacement carbon vanes at competitive prices, while providing the technical support expected from an established specialist. Our Price Promise applies to qualifying, genuinely comparable replacement carbon vanes offered by other UK suppliers, subject to our published conditions. Customers should be able to obtain value for money without compromising on knowledgeable assistance or dependable supply.

Customer satisfaction and externally audited ISO 9001:2015 quality management. VacAir operates an ISO 9001:2015 certified quality management system, with externally audited processes supporting customer satisfaction, consistency and continual improvement. We take pride in accurate product information, honest communication and dependable customer service. Our reputation has been earned through long-standing relationships with customers who rely on our products and technical knowledge.

OEM-trained engineers and professional Becker pump repairs. Unlike businesses that only sell replacement vanes, VacAir also provides dedicated engineering and workshop services. Our experienced engineers can fit new carbon vanes, inspect the rotor and cylinder, investigate abnormal wear and undertake servicing or mechanical repairs. Our Becker pump repair and refurbishment workshop provides specialist fitting, service and repair support at highly competitive rates.

Becker spares and complete pump maintenance support. Alongside replacement vanes, VacAir supplies a comprehensive selection of Becker vacuum pump spare parts, including OEM components and quality replacement alternatives. Customers can discuss filters, maintenance components and wider pump requirements with a supplier who understands the complete machine.

Dependable UK stock, practical advice and worldwide delivery. Whether maintaining a Becker DT3.25, servicing a VT4.25 or repairing an older T-series pump, customers can rely on VacAir for the correct seven-vane set, competitive quotations and responsive delivery arrangements. Our aim is to help keep essential equipment running while making the purchasing process straightforward for engineers and commercial buyers.

FREQUENTLY ASKED QUESTIONS