VacAir Superstore stocks, supplies and sells Busch SV 1040B replacement carbon vanes for the maintenance of dry-running rotary vane vacuum pumps. Our replacement vanes measure 95 × 44 × 4 mm and are identified by Busch OEM part number 0722000488 and VacAir reference VA722000488. The SV 1040B requires seven carbon vanes per pump, with a 34 mm minimum permitted vane height. We supply the correct replacement vanes from UK stock, with competitive prices and knowledgeable technical assistance.
Busch OEM reference: 0722000488
VacAir reference: VA722000488
Quantity required: 7 vanes per pump
Vane dimensions: 95 × 44 × 4 mm
Minimum vane height: 34 mm
Material: Carbon
Availability: IN STOCK
TRUSTED BY INDUSTRY FOR OVER 30 YEARS
NEED REPLACEMENT CARBON VANES?
Why waste time endlessly searching? Just give us a quick call.
No online checkout risk. No tedious forms.
Just a quick call with vacuum pump specialists
who know their products.
No Doubts – No Worries!
Get the right vanes at the right prices, with delivery arranged around how urgently you need them.
CALL THE EXPERTS NOW ☎ 0113 2088501 One quick call could save you time and money.Prefer to write to us?
✉ SEND AN ENQUIRY →URGENT ORDERS WELCOME
UK, European & Worldwide Supply
VacAir Superstore stocks and supplies Busch SV 1040B replacement carbon vanes for industrial users, maintenance engineers and vacuum pump service companies. With extensive experience in replacement vane supply since 1996, we help customers source correctly identified components for the Busch SV 1040B dry-running rotary vane vacuum pump, supported by specialist technical knowledge and competitive quotations.
Our replacement vanes are identified by Busch OEM reference 0722000488 and VacAir part number VA722000488. Each vane measures 95 × 44 × 4 mm, and the SV 1040B requires seven matching carbon vanes. Obtaining the full replacement quantity in advance allows maintenance teams to organise pump servicing with the correct parts ready for installation.
An SV 1040B vane starts with an original height of 44 mm. The minimum permitted height is 34 mm, making accurate measurement important when inspecting a used set. However, vane height is only part of the assessment. Engineers should also look for cracks, chipped corners, uneven running surfaces and evidence that individual vanes have not been moving freely inside their rotor slots.
The SV 1040B uses 95 mm carbon vanes. Careful inspection along their full length is worthwhile, particularly if a pump has experienced unusual noise, reduced vacuum performance or unexpected vane damage. Replacing worn vanes without checking the cylinder and rotor condition may leave an underlying problem unresolved. VacAir can supply the replacement vanes and provide professional fitting or repairs through our own engineering department.
Our wider range of Busch vacuum pump spare parts supports routine servicing and more extensive maintenance. For customers who need specialist workshop assistance, see our Busch vacuum pump repairs and servicing.
TECHNICAL INFORMATION
|
SV 1040B VANE FEATURES✓ Replacement carbon vanes for Busch SV 1040B pumps
✓ Complete replacement quantity of seven vanes
✓ Correct dimensions of 95 × 44 × 4 mm
✓ New vane height 44 mm; minimum height 34 mm
✓ Identified by main OEM reference 0722000488
✓ UK stock and specialist vacuum pump assistance
|
Routine inspection of the Busch SV 1040B should include examining the condition and remaining height of all seven carbon vanes. As the pump operates, the vanes gradually wear against the cylinder. Monitoring their condition helps engineers plan replacement before excessive wear or mechanical damage interrupts operation.
The replacement vanes measure 95 × 44 × 4 mm when new, with an original height of 44 mm and a 34 mm minimum permitted height. Check each vane individually and look for irregularities across the seven-vane set. A cracked vane, damaged running edge or carbon vane that sticks in its rotor slot requires attention even when its measured height remains above the wear limit.
SV 1040B inspection checklist:
|
✓ Remove and inspect the complete seven-vane set ✓ Measure each vane against the 34 mm wear limit ✓ Check the full 95 mm length for fractures ✓ Look for chipped edges and uneven vane wear ✓ Clean deposits and carbon dust from rotor slots |
✓ Inspect the cylinder for scoring or damage ✓ Examine rotor condition and bearing movement ✓ Check inlet filtration for restriction or debris ✓ Investigate premature or unusual vane damage ✓ Check that each vane slides smoothly into its rotor slot without binding |
CORRECT CARBON VANE ORIENTATIONCorrect fitting of the seven Busch SV 1040B replacement carbon vanes is essential. Each vane should move freely in its rotor slot, without binding or catching on deposits left behind by the previous set. The higher edge is the leading edge. The chamfer follows behind the leading edge, as illustrated in the adjacent VacAir installation diagram. Before fitting the new vanes, remove carbon dust and any fragments from the rotor slots. Examine the cylinder and rotor for scoring, damage or other signs of abnormal operation. If the previous vanes fractured or wore unevenly, investigate the cause before completing the replacement. Confirm the direction of rotation and follow the pump manufacturer’s servicing instructions. Where internal damage is suspected, VacAir’s engineering department can inspect the pump and provide professional vane fitting or repairs. |
![]() |
VANE FITTING & BUSCH PUMP REPAIRS →
|
VacAir supplies replacement carbon vanes and spare parts for Busch SV 1040B vacuum pumps. Our replacement vane, identified by Busch OEM 0722000488 and VacAir VA722000488, measures 95 × 44 × 4 mm. We can supply the seven matching vanes required for a complete rotor replacement. When servicing an SV 1040B, attention should not stop at the vanes. Inlet filtration, internal cleanliness, rotor slots and cylinder condition all influence how the pump performs. If the old vanes show signs of damage or unusual wear, checking these areas can help prevent avoidable problems after new vanes have been installed. VacAir has been supplying vacuum pump vanes and associated spare parts since 1996. Our experienced spares team can help identify maintenance components and provide practical advice on the parts required, whether you are preparing for a planned service or dealing with an unexpected pump failure. ✓ SV 1040B replacement carbon vanes, OEM 0722000488 ✓ Complete seven-vane replacement quantity ✓ Busch vacuum pump filters and service components ✓ Technical support for part identification and servicing |
VacAir operates its own dedicated vacuum pump service department, offering professional vane fitting, maintenance and repairs in addition to replacement vane supply. Our fully trained engineers can fit the complete seven-vane set in a Busch SV 1040B, inspect the pump and carry out servicing at highly competitive rates.
Understanding why the old vanes need replacing. The condition of a used vane set can provide valuable information about the pump. Uneven wear, damaged edges or a vane that has become trapped in its rotor slot may indicate internal problems. Our engineers can inspect the rotor and cylinder, helping identify issues that should be corrected before fitting the new carbon vanes.
Professional fault diagnosis and pump repairs. Reduced vacuum performance, abnormal running noise and repeated vane damage can have causes beyond normal wear. Our workshop can investigate filtration, bearings, seals and internal running surfaces, then advise on the most appropriate servicing or repair work.
Our OEM-trained engineers combine practical workshop experience with extensive knowledge of industrial vacuum pumps. Customers can choose to purchase replacement carbon vanes for their own maintenance or arrange a complete service with VacAir. We offer straightforward technical advice and competitively priced engineering work, supported by decades of specialist experience.
|
From our operation in Leeds, West Yorkshire, VacAir supplies Busch SV 1040B replacement carbon vanes to industrial maintenance teams, engineering contractors and vacuum pump service businesses throughout the UK and overseas. Our UK stock includes the 95 × 44 × 4 mm carbon vane identified by Busch OEM 0722000488. As the SV 1040B requires seven vanes per pump, our spares department can arrange the correct complete quantity for planned maintenance, reducing the risk of delays caused by missing or incorrectly identified replacement parts. We understand that a vacuum pump failure can interrupt production and create urgent spare-parts requirements. In-stock orders confirmed by 4pm on working days can qualify for same-day despatch, subject to order confirmation and carrier arrangements. We also arrange deliveries throughout Europe and worldwide, with options depending on destination and urgency. For a competitive quotation, urgent delivery enquiry or technical assistance, call 0113 2088501 or email sales@vacair-superstore.com. Quote Busch SV 1040B or 0722000488 when contacting our team. |
![]() |
|
Since 1996
Vane Supply
|
Technical Help
Part Identification
|
ISO 9001:2015
Quality Management
|
OEM-Trained
Engineers
|
Specialists in replacement carbon vanes since 1996. VacAir has supplied replacement carbon vanes and vacuum pump spares for decades, supporting industrial customers, engineers and specialist service companies. We understand that customers need dependable components, accurate identification and knowledgeable assistance to keep their equipment operating.
UK stock of the correct SV 1040B replacement vanes. We stock the 95 × 44 × 4 mm carbon vane identified by Busch OEM 0722000488 and VacAir VA722000488. Our spares team understands that the SV 1040B requires seven matching vanes and can supply the complete replacement quantity for maintenance and repair work.
Vacuum pump knowledge rather than generic catalogue selling. VacAir specialises in vacuum pumps and their components. Our team understands vane dimensions, wear limits, rotor condition and correct fitting, so customers can obtain practical assistance from experienced people rather than relying solely on a parts listing.
Competitive pricing supported by our Price Promise. We work to offer replacement carbon vanes at attractive prices while maintaining dependable supply and technical support. Our published Price Promise explains the conditions under which we can match a qualifying lower price from another UK supplier for genuinely comparable replacement carbon vanes.
Customer satisfaction and externally audited ISO 9001:2015 systems. VacAir operates an ISO 9001:2015 quality management system incorporating customer satisfaction monitoring and continual improvement. Our reputation has been built through accurate product identification, reliable service and straightforward dealings with customers.
We do not fabricate product reviews, invent customer ratings or display artificial review scores on our website or provide them to search engines. Our products, expertise and reputation have supported customers across the vacuum pump industry for decades.
OEM-trained engineers and our own dedicated service department. VacAir offers more than replacement carbon vane supply. Our fully trained engineers can fit the seven SV 1040B replacement vanes, inspect the pump, investigate mechanical faults and undertake servicing or repairs. We provide professional engineering support at highly competitive rates.
Honest advice, established experience and worldwide supply. Whether you are maintaining a single Busch SV 1040B or supplying vanes to industrial customers, VacAir combines UK stock, competitive quotations, international delivery arrangements and decades of vacuum pump expertise. Our aim is to help customers obtain the right replacement vanes at the right price, with practical assistance whenever required.
Trust VacAir Superstore for all your vacuum pump needs.
Contact us for replacement vanes, spare parts, vacuum pumps and engineering support.