VacAir Superstore stocks replacement carbon vanes for the Busch SV 1016C SECO dry-running vacuum pump. These 63 × 36.5 × 4 mm carbon vanes are identified by Busch OEM reference 0722000489 and VacAir part number VA722000489. The pump requires seven vanes for a complete replacement, with a 27 mm minimum permitted wear height. Supplied from UK stock, our replacement vanes are available with specialist part-identification assistance, competitive quotations and access to VacAir’s experienced vacuum pump engineers.
Busch OEM reference: 0722000489
VacAir reference: VA722000489
Quantity required: 7 vanes per pump
Vane dimensions: 63 × 36.5 × 4 mm
Minimum vane height: 27 mm
Material: Carbon
Availability: IN STOCK
TRUSTED BY INDUSTRY FOR OVER 30 YEARS
NEED REPLACEMENT CARBON VANES?
Why waste time endlessly searching? Just give us a quick call.
No online checkout risk. No tedious forms.
Just a quick call with vacuum pump specialists
who know their products.
No Doubts – No Worries!
Get the right vanes at the right prices, with delivery arranged around how urgently you need them.
CALL THE EXPERTS NOW ☎ 0113 2088501 One quick call could save you time and money.Prefer to write to us?
✉ SEND AN ENQUIRY →URGENT ORDERS WELCOME
UK, European & Worldwide Supply
VacAir Superstore stocks and supplies Busch SV 1016C replacement carbon vanes for the maintenance of SECO dry-running rotary vane vacuum pumps. Whether you are responsible for industrial equipment, carrying out scheduled maintenance or repairing a pump on behalf of a customer, VacAir can help you obtain correctly identified replacement carbon without the uncertainty of a general parts catalogue.
For the Busch SV 1016C, the replacement vane is identified by OEM part number 0722000489 and VacAir reference VA722000489. Each vane measures 63 × 36.5 × 4 mm, and the rotor takes seven vanes. Our spares team can supply the complete quantity and help customers confirm the correct component before arranging despatch.
A new SV 1016C carbon vane has a height of 36.5 mm. The minimum permitted height is 27 mm, so measuring the remaining carbon during maintenance is an important way of assessing wear. Engineers should inspect each of the seven vanes, paying particular attention to fractured edges, abnormal wear patterns and carbon that is sticking within the rotor slots.
The condition of the old vanes can reveal useful information about the pump itself. If the SV 1016C has lost vacuum performance, become noisy or suffered unexpected carbon damage, checking the cylinder, rotor and inlet filtration before fitting replacements may prevent another avoidable failure. VacAir combines replacement vane supply with an established in-house engineering department for customers who require fitting, fault investigation or repairs.
Our wider Busch vacuum pump spares range supports planned maintenance and repair work. If you need assistance beyond supplying replacement carbon, see our Busch pump servicing and repairs.
TECHNICAL INFORMATION
|
SV 1016C VANE FEATURES✓ Replacement carbon for Busch SECO SV 1016C pumps
✓ Seven vanes required for a full rotor replacement
✓ Dimensions of 63 × 36.5 × 4 mm
✓ Original height 36.5 mm; minimum height 27 mm
✓ Identified by main OEM number 0722000489
✓ UK stock and dedicated vacuum pump technical support
|
Preventative maintenance on the Busch SV 1016C should include checking the carbon vanes before they reach their permitted wear limit. The pump relies on seven vanes moving freely within the rotor. As their running surfaces wear, their remaining height decreases, making regular inspection an important part of protecting the pump’s internal components.
The original vane height is 36.5 mm, with a 27 mm minimum permitted height. Measure each vane separately and assess the overall condition of the seven-vane set. Broken corners, unusual deposits or significantly different wear between vanes may justify further examination of the rotor, cylinder and filtration system.
SV 1016C inspection checklist:
|
✓ Remove and examine the complete seven-vane set ✓ Measure remaining height against the 27 mm limit ✓ Look for chipped edges and fractured carbon ✓ Compare wear across all seven running surfaces ✓ Remove carbon dust and deposits from rotor slots |
✓ Inspect the cylinder for scoring and damage ✓ Check rotor condition and bearing movement ✓ Examine inlet filters for contamination or restriction ✓ Investigate the reason for any premature vane failure ✓ Check that each vane slides smoothly into its rotor slot without binding |
CORRECT CARBON VANE ORIENTATIONWhen fitting new Busch SV 1016C carbon vanes, pay particular attention to the orientation of the carbon and the condition of each rotor slot. All seven vanes must be able to move freely once installed. The higher edge of the vane is the leading edge. The chamfer follows behind the leading edge, as illustrated in the VacAir fitting diagram. Clean away carbon dust and any broken fragments before fitting the replacement set. Inspect the cylinder for scoring and the rotor slots for damage or restrictions that might interfere with the movement of the new vanes. Confirm the direction of rotation and follow the pump manufacturer’s servicing instructions. If there is evidence of internal damage or repeated vane failure, professional inspection is advisable before returning the pump to operation. |
|
|
VacAir supplies replacement carbon vanes and spare parts for Busch SV 1016C vacuum pumps. Our stocked replacement, VA722000489, corresponds to Busch OEM reference 0722000489 and measures 63 × 36.5 × 4 mm. We can supply the seven matching vanes required for a complete rotor replacement. When arranging a service, it makes sense to consider the pump’s wider condition. Inlet filtration, bearings, seals and internal running surfaces all deserve attention where there are signs of poor vacuum performance, contamination or abnormal wear. Correcting the cause of vane damage can be as important as replacing the carbon itself. Since 1996, VacAir has helped industrial users and service companies source replacement vanes and vacuum pump components. Our technical team can assist with identifying additional service parts and discussing maintenance requirements, whether the work is planned in advance or follows an unexpected stoppage. ✓ SV 1016C carbon vanes, OEM 0722000489 ✓ Seven matching vanes for a complete rotor set ✓ Busch filtration and other service components ✓ Experienced parts identification and technical advice |
Prefer to have your Busch SV 1016C professionally maintained? Alongside supplying replacement carbon vanes, VacAir operates its own dedicated vacuum pump service department. Our fully trained engineers can replace the seven carbon vanes, inspect the pump and undertake servicing or repairs at highly competitive rates.
Vane replacement with a proper mechanical inspection. Rather than treating the job as simply removing old carbon and inserting new pieces, our engineers can assess the condition of the seven-vane rotor, examine the cylinder and check whether the existing wear pattern suggests a problem requiring attention. This is particularly useful when a pump has suffered broken vanes or an unexplained reduction in performance.
Experienced diagnosis of vacuum pump faults. Problems such as insufficient vacuum, abnormal noise, overheating or recurring carbon damage can have several possible causes. Our workshop can examine the condition of the pump, including filtration, bearings, seals and internal components, and advise on the work needed to restore reliable operation.
VacAir has been involved in the supply and servicing of industrial vacuum equipment for decades. Our OEM-trained engineers combine practical workshop experience with detailed product knowledge, helping customers avoid unnecessary replacement costs where servicing or repair is a suitable solution. We offer competitive rates and straightforward technical advice, whether you need routine vane fitting or more extensive work.
|
From our operation in Leeds, West Yorkshire, VacAir supplies Busch SV 1016C carbon vanes to industrial customers, engineering contractors and vacuum pump maintenance businesses across the UK and overseas. Our UK stock includes the 63 × 36.5 × 4 mm replacement carbon vane identified by 0722000489. With seven vanes required for each SV 1016C pump, we can help customers obtain the full quantity for a planned service, rather than leaving a maintenance job incomplete because the correct parts were not available. We appreciate that replacement vanes may be required urgently when production or other essential equipment depends on a working vacuum pump. In-stock orders confirmed before 4pm on working days can qualify for same-day despatch, subject to order confirmation and carrier arrangements. We also offer delivery options for customers in Europe and worldwide. Need a quotation or urgent despatch advice? Call 0113 2088501 or email sales@vacair-superstore.com. Tell us you need Busch SV 1016C vanes, part number 0722000489, and we can discuss the correct quantity and delivery arrangements. |
|
|
Since 1996
Vane Supply
|
Technical Help
Part Identification
|
ISO 9001:2015
Quality Management
|
OEM-Trained
Engineers
|
Replacement vane specialists since 1996. VacAir has been supplying carbon vanes and vacuum pump spares to industrial customers for three decades. Our business has developed around the needs of engineers, maintenance teams and companies that depend on their pumps, rather than simply offering a large catalogue of unrelated industrial products.
UK vane stock and the correct replacement quantity. We stock the Busch SV 1016C replacement carbon vane identified by 0722000489 and VA722000489. With seven vanes required per pump, our spares team can supply the matching quantity needed to renew the rotor set and assist with checking dimensions before an order is confirmed.
Real vacuum pump expertise when you need it. The value of a specialist supplier becomes clear when an engineer needs more than a part number. Our team understands the practical issues associated with vane wear, correct installation, rotor damage and reduced vacuum performance. You can discuss the application with people who know how dry-running rotary vane pumps operate.
Competitive prices and our published Price Promise. We work to provide replacement carbon vanes at the right price, without sacrificing technical support or dependable supply. Our Price Promise sets out the circumstances in which we will match a qualifying lower quotation from another UK supplier for a genuinely comparable replacement carbon vane.
Externally audited ISO 9001:2015 quality management. VacAir operates an ISO 9001:2015 quality management system, with customer satisfaction and continual improvement forming part of our established procedures. We believe that reliable product identification, responsive service and clear communication are important to maintaining customer confidence.
We do not fabricate product reviews, invent customer ratings or display artificial review scores on our website or provide them to search engines. Our products, expertise and reputation have supported customers across the vacuum pump industry for decades.
Our own service department and OEM-trained engineers. We are not limited to posting out carbon vanes. VacAir’s fully trained engineers can fit the complete seven-vane SV 1016C set, inspect the pump, investigate mechanical faults and undertake servicing or repairs. Our dedicated engineering department offers these services at highly competitive rates, giving customers access to knowledgeable support when a repair requires more than replacement parts.
Honest advice, dependable supply and an established reputation. Whether you are ordering for your own workshop, maintaining industrial machinery or supplying parts to another business, VacAir aims to make the process straightforward. We combine UK vane stock, worldwide delivery arrangements, competitive quotations and decades of practical vacuum pump experience to help customers obtain the right parts with confidence.
Trust VacAir Superstore for all your vacuum pump needs.
Contact us for replacement vanes, spare parts, vacuum pumps and engineering support.