Rietschle DFT 60 Replacement Carbon Vanes – 507108 / 524009
RIETSCHLE DFT 60 REPLACEMENT CARBON VANES
VacAir Superstore stocks Rietschle DFT 60 replacement carbon vanes for industrial dry-running rotary vane pump servicing. We supply 200 × 34 × 4 mm carbon vanes under OEM reference 507108 and equivalent 524009. The DFT 60 requires four vanes, with a 25 mm minimum working height.
Rietschle OEM reference: 507108
Extended OEM reference: 5071080000
Alternative OEM reference: 524009
VacAir reference: VA507108
Quantity required: 4 vanes per pump
Vane dimensions: 200 × 34 × 4 mm
Minimum vane height: 25 mm
Material: Carbon
Availability: IN STOCK
ELMO RIETSCHLE DFT 60 REPLACEMENT CARBON VANES
VacAir Superstore stocks and supplies Rietschle DFT 60 replacement carbon vanes for dry-running rotary vane pump maintenance. Our customers include manufacturers, engineering service companies and plant maintenance teams needing dependable replacement parts for scheduled work or a pump that has stopped unexpectedly.
The DFT 60 requires four carbon vanes for a complete replacement. Each vane measures 200 × 34 × 4 mm and is identified by Rietschle OEM number 507108 or equivalent reference 524009. VacAir supplies these vanes from UK stock under reference VA507108.
Within the pump, carbon vanes move through the rotor slots as the rotor turns. Wear gradually reduces their height and can eventually affect pump performance. For the DFT 60, the vane is 34 mm high when new, and the minimum working height is 25 mm. The condition of all four vanes should be checked together during a service.
An important detail when buying replacement DFT 60 vanes is the four-vane set quantity. The individual carbon vane is also used in other pump models, but this page focuses on the DFT 60 rather than duplicating the compatibility table maintained on the master vane page.
In addition to carbon vanes, VacAir supplies Elmo Rietschle filters and spare parts. Our vacuum pump service team can also help with fitting, fault investigation and repairs.
TECHNICAL INFORMATION
|
DFT 60 VANE FEATURES✓Carbon vanes for the Rietschle DFT 60 pump
✓Four vanes for a complete replacement
✓200 × 34 × 4 mm replacement dimensions
✓25 mm minimum permitted vane height
✓Cross-reference to Rietschle OEM 507108
✓VacAir part identification and technical support
|
RIETSCHLE DFT 60 VANE INSPECTION & REPLACEMENT
|
When maintaining a Rietschle DFT 60, inspect the entire four-vane set rather than checking only the most accessible vane. Look for differences in wear, chipped edges, cracks and any evidence that a vane has been sticking in its rotor slot. New DFT 60 carbon vanes measure 200 × 34 × 4 mm. Their original height is 34 mm, and the minimum working height is 25 mm. Measure the height carefully and examine the pump’s internal condition before deciding whether it is ready for new vanes. All four vanes should be changed at the same time. DFT 60 inspection points during a carbon vane change: ✓ Measure the height of all four carbon vanes ✓ Inspect vane edges for chips or fractures ✓ Check that the vanes slide freely in the rotor slots ✓ Examine the cylinder wall for scoring or damage ✓ Inspect the rotor and shaft condition ✓ Check bearings for excessive wear or movement ✓ Inspect inlet filtration and accumulated carbon dust ✓ Check for contamination or evidence of overheating ✓ Investigate any abnormal or uneven vane wear DFT 60 wear limit: New vane height 34 mm; minimum working height 25 mm. Inspect all four vanes and follow the manufacturer’s instructions when replacing the set.
|
 |
ELMO RIETSCHLE DFT 60 SPARE PARTS
|
VacAir supplies DFT 60 carbon vanes alongside filters and associated Rietschle spare parts. Ordering the complete four-vane quantity in advance can make a planned service more straightforward and help maintenance teams minimise equipment downtime. Vane wear should not be considered in isolation. While the pump is open, inspect inlet filtration, the rotor and shaft, the cylinder running surface and the bearings. Debris from a damaged vane or excessive carbon dust can cause further problems if it is left inside the pump. We have supplied vacuum pump vanes and parts since 1996. For the DFT 60, we stock 200 × 34 × 4 mm vanes identified by 507108 and alternative 524009, and can supply other parts needed during a service or repair. ✓ Rietschle 507108 replacement carbon vanes ✓ Inlet filters and maintenance components ✓ Vacuum pump spare parts and repair support ✓ Technical assistance identifying correct parts |
 |
DFT 60 VANE FITTING & PUMP SERVICING
For a complete DFT 60 vane replacement, four carbon vanes are required. VacAir sells the replacement vanes for customers undertaking their own servicing and can also arrange fitting through our engineering team.
Before installing a fresh set, measure the old vanes against the 25 mm minimum working height. Inspect the rotor slots for free movement, check the internal running surfaces and make sure contamination or damaged components will not affect the new vanes.
If the DFT 60 has suffered a sudden drop in performance, unusual noise, heat or a broken vane, investigate the underlying cause. Installing replacement carbon without addressing scoring, bearing wear or restricted vane movement may lead to further failures.
VacAir combines DFT 60 vane stock with access to OEM-trained engineers for inspections, preventative servicing, vane fitting and pump repairs. Customers can buy the parts alone or ask us to support the wider maintenance job.
DFT 60 CARBON VANES — UK & WORLDWIDE SUPPLY
|
VacAir supplies Rietschle DFT 60 replacement carbon vanes from Leeds to industrial customers throughout the UK. We work with factory maintenance departments, engineering contractors and pump service businesses that need replacement parts without unnecessary delay. For overseas requirements, we also export vanes and pump spares to Europe and worldwide destinations. Courier options, urgent despatch and collection from our Leeds trade counter can be discussed to suit the customer’s maintenance timetable. When ordering for a DFT 60, specify four 200 × 34 × 4 mm carbon vanes, OEM reference 507108 or equivalent 524009. The minimum working height for this model is 25 mm. To order DFT 60 vanes or discuss delivery, call 0113 2088501 or email sales@vacair-superstore.com. |
 |
WHY BUY RIETSCHLE DFT 60 VANES FROM VACAIR?
|
Since 1996
Vane Supply
|
Technical Help
Part Identification
|
ISO 9001:2015
Quality Management
|
OEM-Trained
Engineers
|
Decades of supplying vacuum pump vanes. VacAir has served industrial customers since 1996, supplying carbon vanes, filters and replacement parts to OEMs, service engineers, distributors and end users. Our experience helps customers buy from a specialist who understands the equipment as well as the spare part.
DFT 60 vanes available from UK stock. We stock the 200 × 34 × 4 mm replacement carbon vane and supply the four required for a complete DFT 60 change. UK stock supports planned servicing and urgent replacement requirements without customers needing to source individual vanes from several suppliers.
Competitive pricing backed by our Price Promise. We work to offer strong value on replacement carbon vanes while maintaining product quality and knowledgeable service. Our published Price Promise terms explain how comparable UK offers are assessed, so customers can make an informed purchasing decision.
Clear technical information before ordering. The DFT 60 takes four vanes, identified by 507108 and equivalent 524009. We publish the vane dimensions and model-specific 25 mm wear limit to help maintenance teams prepare accurate parts lists and plan replacement work.
Engineering capability beyond parts sales. Our OEM-trained engineers can help with inspection, vane fitting, fault diagnosis, workshop servicing and repairs. If a pump has broken vanes or recurring wear problems, customers can obtain both replacement parts and access to a team experienced in vacuum pump maintenance.
Quality systems and worldwide customer support. VacAir operates under an ISO 9001:2015 quality management system and supplies businesses across the UK, Europe and worldwide. From planned orders to urgent maintenance needs, our aim is to combine reliable vane supply, responsive communication and practical support.
RIETSCHLE DFT 60 CARBON VANE QUESTIONS
Where can I buy Rietschle DFT 60 carbon vanes?
How many carbon vanes does the DFT 60 need?
What are the dimensions of DFT 60 replacement vanes?
What is the DFT 60 minimum working vane height?
Are Rietschle 507108 and 524009 equivalent part numbers?
Should DFT 60 carbon vanes be replaced as a complete set?
What should be checked if DFT 60 vanes wear unevenly?
Can VacAir supply DFT 60 vanes urgently or fit them?
Trust VacAir Superstore for all your vacuum pump needs.
Contact us for replacement vanes, spare parts, vacuum pumps and engineering support.
