Rietschle DTA 100 Replacement Vanes – 523889 / 525351 / 525977
RIETSCHLE DTA 100 REPLACEMENT CARBON VANES
Buy Rietschle DTA 100 replacement carbon vanes from VacAir Superstore, an established UK vacuum pump spares specialist. We stock the 215 × 52 × 5 mm carbon vane identified by OEM 523889 and alternative numbers 525351 and 525977. The DTA 100 requires six vanes per compressor, with a minimum permitted vane height of 38 mm. Our spares department supports both scheduled servicing and urgent replacement enquiries.
Rietschle OEM reference: 523889
Alternative OEM references: 525351 | 525977
Extended OEM reference: 5238890000
VacAir reference: VA523889
Quantity required: 6 vanes per pump
Vane dimensions: 215 × 52 × 5 mm
Minimum vane height: 38 mm
Material: Carbon
Availability: IN STOCK
ELMO RIETSCHLE DTA 100 REPLACEMENT CARBON VANES
Keep your Rietschle DTA 100 compressor maintained with replacement carbon vanes from VacAir. Our UK spares department supplies the carbon needed by industrial maintenance teams, compressor engineers and purchasing departments. We understand that obtaining the correct vane set promptly is important when a machine is due for servicing or has stopped unexpectedly.
The DTA 100 requires six carbon vanes measuring 215 × 52 × 5 mm. The primary Rietschle reference is 523889, with 525351 and 525977 as alternative numbers. VacAir supplies this replacement specification under VA523889, allowing customers to identify the part from a service record, purchasing list or existing component.
The original vane height is 52 mm, while the DTA 100 minimum permitted working height is 38 mm. Carbon vanes wear progressively during operation, so checking their remaining height forms part of sensible preventative maintenance. Cracks, broken edges or uneven wear also require attention, regardless of the measurement.
For a complete DTA 100 vane change, purchase six matching replacements. Although the 523889 vane specification is used in other Rietschle equipment, the six-vane requirement and 38 mm minimum height stated here relate specifically to the DTA 100. This model page is intended to help customers order confidently without confusing the quantities required by different machines.
VacAir can also supply Rietschle spare parts and filters. If inspection identifies internal damage rather than ordinary carbon wear, our engineering and repair services provide additional support.
TECHNICAL INFORMATION
|
DTA 100 VANE FEATURES✓ Replacement carbon vanes for the Rietschle DTA 100
✓ Six matching vanes for a complete compressor change
✓ Original dimensions of 215 × 52 × 5 mm
✓ DTA 100 minimum permitted vane height of 38 mm
✓ OEM references 523889 / 525351 / 525977
✓ Available from VacAir’s specialist UK vane stock
|
RIETSCHLE DTA 100 VANE INSPECTION & REPLACEMENT
|
A DTA 100 inspection should include all six carbon vanes, rather than judging the condition of the set from one removed piece. Measure each vane and compare the wear pattern across the rotor. Unequal wear, damaged edges or carbon fragments may reveal conditions that should be addressed before replacement. The new vane specification is 215 × 52 × 5 mm, with an initial height of 52 mm. The DTA 100 minimum working height is 38 mm. A vane can still require replacement above that limit if it is cracked, chipped, distorted or unable to move correctly within its slot. Recommended DTA 100 inspection points: ✓ Measure the height of every vane in the six-vane set ✓ Compare the contact faces for consistent wear ✓ Examine edges and corners for chips or fractures ✓ Check that each vane moves freely in its rotor slot ✓ Inspect the cylinder surface for scoring or damage ✓ Examine the rotor and shaft for unusual wear ✓ Check bearing condition and abnormal shaft movement ✓ Inspect inlet filtration and signs of restriction ✓ Remove loose carbon debris using suitable safe procedures ✓ Investigate overheating, contamination or repeated vane failures DTA 100 vane measurement: New height 52 mm; minimum permitted height 38 mm. Assess the condition of all six vanes and follow the manufacturer’s maintenance instructions.
|
 |
ELMO RIETSCHLE DTA 100 SPARE PARTS
|
Source your DTA 100 carbon vanes from VacAir’s dedicated spares department. We stock the 523889 replacement vane, including alternative references 525351 and 525977. Purchasing a full set of six from one specialist supplier simplifies preparation for compressor servicing and helps avoid delays caused by missing parts. A vane replacement is also an opportunity to examine the wider compressor. Filters, bearings and the internal running surfaces all influence reliable operation. If the old vanes show signs of abnormal wear or breakage, the cause should be investigated before the machine is returned to service. Since 1996, VacAir has supported industrial customers with replacement vanes, vacuum pump components and technical expertise. Whether the requirement is a straightforward six-vane DTA 100 set or additional maintenance components, our team can help buyers identify the parts needed for their work. ✓ Stocked 523889 / 525351 / 525977 replacement carbon vanes ✓ Inlet filters and routine compressor maintenance items ✓ Additional Elmo Rietschle pump and compressor spares ✓ Specialist servicing and engineering assistance when needed |
 |
DTA 100 VANE FITTING & PUMP SERVICING
For a complete Rietschle DTA 100 vane change, fit six 523889 specification carbon vanes. VacAir supplies these replacement parts to businesses carrying out their own servicing, and our engineering department can provide additional assistance where specialist fitting or repair work is required.
The removed vanes should be measured against the 38 mm minimum permitted height and inspected for cracks, chipping and irregular contact marks. Before new carbon is installed, make sure the rotor slots are clean, unobstructed and suitable for correct vane movement.
Where a vane has broken or the compressor has developed abnormal noise or performance problems, inspect the internal cylinder, rotor, bearings and filtration system. Replacing carbon without investigating an underlying mechanical problem could lead to another premature failure.
Supplying the correct DTA 100 vanes remains our first priority. Customers can buy the replacement parts without taking a servicing package. If further help is needed, VacAir’s OEM-trained engineers can assist with fault diagnosis, preventative maintenance, fitting and repairs.
DTA 100 CARBON VANES — UK & WORLDWIDE SUPPLY
|
From our Leeds operation, VacAir supplies Rietschle DTA 100 carbon vanes to industrial customers, engineering companies and distributors across the UK. We hold the replacement specification in stock, supporting both regular maintenance purchasing and breakdown-related enquiries. Our spares department also serves customers in Europe and worldwide. Delivery arrangements can be discussed according to the destination, quantity and urgency, with collection options available for customers who prefer to arrange their own transport. When requesting a quotation, identify the DTA 100 and quote 523889, 525351 or 525977. A full set consists of six vanes measuring 215 × 52 × 5 mm, with a 38 mm model-specific minimum height. For prices and delivery information, call 0113 2088501 or email sales@vacair-superstore.com. |
 |
WHY BUY RIETSCHLE DTA 100 VANES FROM VACAIR?
|
Since 1996
Vane Supply
|
Technical Help
Part Identification
|
ISO 9001:2015
Quality Management
|
OEM-Trained
Engineers
|
Established replacement vane specialists since 1996. VacAir has supplied carbon vanes and industrial vacuum pump spares for decades. When purchasing DTA 100 vanes, customers are dealing with an experienced specialist business that understands the importance of correct components, dependable service and keeping industrial equipment operational.
523889 carbon vanes available from UK stock. We hold the 215 × 52 × 5 mm replacement vane, also identified by 525351 and 525977. The DTA 100 needs six vanes for a full replacement, and our spares team can help customers obtain the correct quantity for their maintenance requirements.
Vacuum pump expertise, not simply a list of part numbers. Our business works with vacuum pumps, compressors, carbon vanes, filtration, spare parts and engineering. We understand the equipment our products are fitted to and can offer practical assistance when customers need to check a reference or discuss an unusual maintenance problem.
Competitive prices backed by our Price Promise. We aim to offer good value on replacement carbon vanes without sacrificing specialist knowledge or customer service. Our published Price Promise terms explain the conditions for qualifying comparisons with other UK suppliers.
Customer satisfaction supported by independently audited systems. VacAir operates within an ISO 9001:2015 quality management system that includes customer satisfaction review and continual improvement. We believe long-term customer relationships are built through dependable supply, accurate information and the way a business responds when assistance is needed.
We do not fabricate product reviews, invent customer ratings or display artificial review scores on our website or provide them to search engines. We have no need to. Our products, expertise and reputation have supported customers across the pump industry for decades.
OEM-trained engineering support beyond the vane sale. If a DTA 100 has suffered a broken vane, unusual wear or internal damage, VacAir can assist with inspection, fitting, diagnosis and repairs. Our engineering expertise is available when needed, but customers who only require a set of replacement vanes are equally welcome.
Professional service for UK and worldwide customers. VacAir combines specialist stock, experienced staff and ISO 9001:2015 quality management with domestic and international supply. We want every customer ordering DTA 100 vanes to feel confident in the product identification, the people behind the sale and the support available afterwards.
RIETSCHLE DTA 100 CARBON VANE QUESTIONS
Where can I purchase Rietschle DTA 100 replacement carbon vanes?
How many carbon vanes does the DTA 100 compressor require?
What are the dimensions of a new DTA 100 carbon vane?
What is the minimum permitted DTA 100 vane height?
Are 523889, 525351 and 525977 equivalent replacement references?
Should I replace all six DTA 100 vanes at the same time?
What should be checked if a DTA 100 vane has fractured?
Can VacAir supply DTA 100 vanes internationally and help with servicing?
Trust VacAir Superstore for all your vacuum pump needs.
Contact us for replacement vanes, spare parts, vacuum pumps and engineering support.
