Elmo Rietschle DLT 15 Replacement Carbon Vanes – 513702
RIETSCHLE DLT 15 REPLACEMENT CARBON VANES
Order Rietschle DLT 15 replacement carbon vanes from VacAir Superstore, a UK vacuum pump specialist supplying carbon vanes since 1996. The DLT 15 takes six 513702 carbon vanes, measuring 55 × 39 × 4 mm. For this pump the minimum working vane height is 24 mm. Replacement vanes are held in UK stock, with pump spares and engineering support also available.
Rietschle OEM reference: 513702
Extended OEM reference: 5137020000
VacAir reference: VA513702
Quantity required: 6 vanes per pump
Vane dimensions: 55 × 39 × 4 mm
Minimum vane height: 24 mm
Material: Carbon
Availability: IN STOCK
ELMO RIETSCHLE DLT 15 REPLACEMENT CARBON VANES
For a Rietschle DLT 15 needing new carbon vanes, VacAir offers a straightforward route to the correct replacement parts. We stock 513702 carbon vanes in the UK for routine servicing, maintenance shutdowns and unexpected pump repairs.
The DLT 15 rotor takes six vanes. Each replacement measures 55 × 39 × 4 mm, and the vane is also referenced as 5137020000. Our VacAir stock reference is VA513702, so buyers can quote either the pump model or the part number when enquiring.
A new vane has a 39 mm height. The DLT 15 minimum working height is 24 mm, which is the model-specific measurement to use when assessing wear. Height is only one consideration: cracking, chipped corners and irregular wear can also make replacement necessary.
For planned maintenance, obtaining the full six-vane quantity before opening the pump helps avoid an incomplete change. The 513702 part is used in other Rietschle machines with different vane quantities; this page specifies the requirements for the DLT 15 itself.
VacAir also supplies Rietschle spare parts and filters, with vacuum pump servicing and repairs available if the work extends beyond replacing the vanes.
TECHNICAL INFORMATION
|
DLT 15 VANE FEATURES✓Stocked replacement carbon vanes for DLT 15 equipment
✓Six vanes required for a complete pump change
✓Compact 55 × 39 × 4 mm carbon vane dimensions
✓24 mm minimum working height for DLT 15
✓Rietschle reference 513702 / VacAir VA513702
✓UK stock with specialist pump industry support
|
RIETSCHLE DLT 15 VANE INSPECTION & REPLACEMENT
|
Before checking DLT 15 carbon vanes, isolate the equipment and follow the appropriate Rietschle maintenance procedure. Remove the set carefully and examine all six vanes; comparing them side by side can make uneven wear or a damaged edge easier to spot. The specified replacement is 55 × 39 × 4 mm. Measure the remaining 39 mm height dimension and compare it with the DLT 15 24 mm minimum working height. Also look at the rotor slots and internal running surface, since new vanes should not be installed into a damaged or contaminated pump without investigating the cause. Useful checks when inspecting a DLT 15: ✓ Measure each of the six vanes and note any differences ✓ Examine the carbon faces and corners for chips ✓ Look for cracks, splits or broken pieces ✓ Check that the vanes move freely in their rotor slots ✓ Inspect the chamber running surface for scoring ✓ Examine the rotor and shaft for visible damage ✓ Check bearings for play or roughness ✓ Inspect inlet filtration and any signs of restriction ✓ Check for loose carbon dust or foreign material ✓ Investigate unusual heat, noise or uneven wear DLT 15 wear measurement: A new vane is 39 mm high; the minimum working height is 24 mm. Inspect and measure all six vanes and follow the manufacturer’s service procedure.
|
 |
ELMO RIETSCHLE DLT 15 SPARE PARTS
|
Buying DLT 15 replacement vanes from VacAir also gives access to a specialist source of related pump parts. We hold the 513702 vane in stock and can supply filters and other components required during maintenance. If the existing vanes have chipped or failed, take the opportunity to check the inlet filter, rotor slots and chamber before fitting the new set. Replacing carbon alone may not resolve a fault caused by contamination, internal damage or bearing problems. Our team has worked with vacuum pump spares since 1996. For the DLT 15, we can supply the six 55 × 39 × 4 mm vanes and discuss other Rietschle maintenance parts when the service scope calls for them. ✓ Rietschle 513702 carbon vane supply ✓ Replacement filters and routine maintenance spares ✓ Parts for Rietschle pump repairs ✓ Support from experienced vacuum pump engineers |
 |
DLT 15 VANE FITTING & PUMP SERVICING
A DLT 15 service can be carried out by suitably competent maintenance personnel using the correct manufacturer procedure. VacAir supplies the six replacement 513702 vanes for customers who prefer to undertake their own pump maintenance.
Use the 24 mm minimum working height as part of the wear assessment, alongside the overall condition of the carbon. Cleanliness, correct fitting and freedom of movement in the rotor slots are important when installing the replacement set.
Where a pump has lost performance or suffered a broken vane, check for damage or contamination before restarting it. A recurring problem deserves investigation rather than repeatedly fitting new carbon into the same conditions.
Customers who need more than parts supply can use VacAir’s OEM-trained engineering team for vane fitting, fault diagnosis, workshop repairs and planned servicing. The starting point remains simple: the DLT 15 vanes are available from our UK stock.
DLT 15 CARBON VANES — UK & WORLDWIDE SUPPLY
|
VacAir supplies DLT 15 replacement carbon vanes from our Leeds base to industrial customers, maintenance contractors and vacuum pump service businesses across the UK. Stock of the 513702 vane supports both advance purchasing and urgent maintenance requirements. For international buyers, we arrange supply to Europe and other worldwide destinations. Customers can discuss suitable courier options, collection from our Leeds trade counter and any time-critical despatch requirements. When requesting a quotation, specify Rietschle DLT 15, part number 513702 or 5137020000, and six vanes measuring 55 × 39 × 4 mm. That gives the sales team the essential information for the replacement set. For prices and delivery options, telephone 0113 2088501 or email sales@vacair-superstore.com. |
 |
WHY BUY RIETSCHLE DLT 15 VANES FROM VACAIR?
|
Since 1996
Vane Supply
|
Technical Help
Part Identification
|
ISO 9001:2015
Quality Management
|
OEM-Trained
Engineers
|
Replacement vane specialists since 1996. Carbon vanes are an established part of VacAir’s business, not a recent addition to a general parts catalogue. DLT 15 customers buy from a company with decades of experience supplying components for industrial vacuum equipment and understanding what happens inside the pumps.
513702 vanes held in UK stock. The 55 × 39 × 4 mm vane is available from VacAir, and a DLT 15 requires six for a complete change. Stock on hand gives customers the option to prepare for a scheduled service or respond quickly when a pump is taken out of operation.
We are pump specialists, not simply parts resellers. Our group has worked with vacuum pumps and their spare parts since 1996. We understand the practical consequences of vane wear, damaged rotor slots and loss of pump performance. That experience gives buyers confidence that they are dealing with a long-established industry specialist.
Competitive prices with the VacAir Price Promise. We aim to provide strong value on replacement carbon vanes, backed by genuine product knowledge and customer service. Our Price Promise terms set out how comparable UK offers are considered.
Customer satisfaction is central to our business. Our ISO 9001:2015 quality management system includes customer satisfaction and continual improvement, with external audits providing independent scrutiny of the system and our processes.
We do not fabricate product reviews, invent customer ratings or display artificial review scores on our website or provide them to search engines. We have no need to. Our products, expertise and reputation have supported customers across the pump industry for decades.
Engineering support when replacement vanes are not the whole answer. A DLT 15 with fractured carbon, poor performance or abnormal wear may require a closer look at its internal condition. VacAir’s OEM-trained engineers provide inspection, fault finding, vane fitting and repair services alongside our parts supply.
Established quality systems and international reach. VacAir combines UK stock, experienced people and ISO 9001:2015 quality management with delivery to customers in the UK and overseas. We want buying DLT 15 vanes to be straightforward, with clear technical details and responsive service.
RIETSCHLE DLT 15 CARBON VANE QUESTIONS
Can I buy Rietschle DLT 15 replacement carbon vanes from VacAir?
What quantity of carbon vanes is needed for a DLT 15?
Which dimensions should I order for DLT 15 vanes?
What is the minimum permitted vane height for the DLT 15?
Do 513702 and 5137020000 refer to the same replacement vane?
Is it better to replace all six DLT 15 vanes at once?
What could cause premature wear of DLT 15 carbon vanes?
Does VacAir offer DLT 15 vane fitting and other spare parts?
Trust VacAir Superstore for all your vacuum pump needs.
Contact us for replacement vanes, spare parts, vacuum pumps and engineering support.
