Elmo Rietschle DLT 25 Replacement Carbon Vanes – 513431
RIETSCHLE DLT 25 REPLACEMENT CARBON VANES
VacAir Superstore stocks replacement carbon vanes for the Rietschle DLT 25, supplying the six 513431 vanes required for a complete change. Measuring 85 × 39 × 4 mm, these vanes have a model-specific 25 mm minimum working height. Buy from an established UK vacuum pump specialist with service and technical support available.
Rietschle OEM reference: 513431
Extended OEM reference: 5134310000
VacAir reference: VA513431
Quantity required: 6 vanes per pump
Vane dimensions: 85 × 39 × 4 mm
Minimum vane height: 25 mm
Material: Carbon
Availability: IN STOCK
ELMO RIETSCHLE DLT 25 REPLACEMENT CARBON VANES
Replacement carbon vanes for the Rietschle DLT 25 are held in VacAir stock, giving production and maintenance teams a straightforward source for this routine but important service component. A worn vane set can interrupt equipment operation, so obtaining the correct carbon parts before maintenance begins is a sensible precaution.
The DLT 25 is fitted with six carbon vanes. VacAir supplies the 85 × 39 × 4 mm vane under part number VA513431, corresponding to Rietschle reference 513431 and extended reference 5134310000. These are the dimensions to check when purchasing replacements for this model.
The original vane height is 39 mm, while the DLT 25 minimum working height is 25 mm. That distinction matters when evaluating removed vanes: an accurate height measurement, considered alongside visible damage and pump condition, is more useful than judging carbon wear by appearance alone.
VacAir supplies more than carbon: we also offer Rietschle filters and spare parts, with pump servicing and repairs available from our engineering team.
TECHNICAL INFORMATION
|
DLT 25 VANE FEATURES✓Stocked replacement carbon vanes for DLT 25 equipment
✓Six vanes required for a complete pump change
✓Compact 85 × 39 × 4 mm carbon vane dimensions
✓25 mm minimum working height for DLT 25
✓Rietschle reference 513431 / VacAir VA513431
✓UK stock with specialist pump industry support
|
RIETSCHLE DLT 25 VANE INSPECTION & REPLACEMENT
|
Inspection of the DLT 25 vane set should begin with a clean, isolated pump and reference to the manufacturer’s service procedure. Remove and assess all six carbon vanes, recording any uneven wear, chips, cracks or signs that individual vanes have not been moving freely. Each new vane measures 85 × 39 × 4 mm, with a 39 mm original height. For the DLT 25 the stated minimum working height is 25 mm. Measure each removed vane at suitable points and consider whether the condition of the rotor or running surface requires attention before replacement. Checks worth completing during a DLT 25 vane inspection: ✓ Record the remaining height of each of the six vanes ✓ Check long edges and corners for fractures or chips ✓ Confirm free movement throughout the rotor slots ✓ Inspect the internal chamber for scoring and wear marks ✓ Look for damage to the rotor and shaft ✓ Check bearing condition and unwanted movement ✓ Inspect the inlet filter and any restriction ✓ Remove loose carbon deposits in line with service guidance ✓ Look for overheating, moisture or other contamination ✓ Investigate differences in wear between the six vanes DLT 25 wear measurement: A new vane is 39 mm high; the minimum working height is 25 mm. Inspect and measure all six vanes and follow the manufacturer’s service procedure.
|
 |
ELMO RIETSCHLE DLT 25 SPARE PARTS
|
DLT 25 carbon vanes are available from VacAir together with a range of Rietschle filters and pump spare parts. If a planned shutdown is approaching, ordering the full six-vane quantity and any associated service items together can help avoid waiting for a missing component. When vanes have worn abnormally or fractured, replacement carbon may be only one part of the repair. Check the internal running surfaces, rotor slots and filtration system for the underlying conditions that may have contributed to the failure. Carbon debris should be removed as part of a proper service. VacAir has supplied vacuum pump spares since 1996. For the DLT 25 we stock 513431 carbon vanes measuring 85 × 39 × 4 mm and can assist with the other service components required to return a pump to dependable operation. ✓ Rietschle 513431 / 5134310000 replacement carbon vanes ✓ Inlet filtration and routine service components ✓ Rietschle spares for wider repair work ✓ OEM-trained engineering and workshop support |
 |
DLT 25 VANE FITTING & PUMP SERVICING
Customers carrying out their own Rietschle DLT 25 vane replacement can purchase the required six carbon vanes directly from VacAir. Our engineering team can also undertake fitting and broader pump maintenance when in-house servicing is not practical.
The 25 mm wear limit is a measurement for the DLT 25, not a substitute for assessing the rest of the pump. Before inserting new vanes, inspect the rotor slots, clean away loose carbon dust and ensure that no damaged surface or contamination will immediately compromise the replacement set.
If vane wear has been unusually rapid, or the pump has become noisy or hot, investigate those symptoms rather than assuming new carbon will resolve the entire problem. Restricted vane travel, poor filtration and worn internal components can all warrant attention during the same service visit.
VacAir supplies 513431 replacement vanes from UK stock and offers access to OEM-trained engineers for fitting, inspection, servicing and repairs. Customers can obtain the parts alone or discuss a more complete maintenance solution.
DLT 25 CARBON VANES — UK & WORLDWIDE SUPPLY
|
VacAir supplies DLT 25 carbon vanes to businesses throughout the UK from our base in Leeds. Whether the requirement is a scheduled replacement or a pump awaiting repair, our stock of the 513431 vane gives customers an established specialist to contact. We also serve customers in Europe and other overseas markets. Delivery arrangements can be discussed around the urgency of the requirement, and customers may enquire about collection from our Leeds trade counter when appropriate. To specify the correct DLT 25 order, quote 513431 or 5134310000 and the 85 × 39 × 4 mm dimensions. A full pump set consists of six vanes; the model-specific minimum wear height is 25 mm. To discuss a DLT 25 vane order, telephone 0113 2088501 or email sales@vacair-superstore.com. |
 |
WHY BUY RIETSCHLE DLT 25 VANES FROM VACAIR?
|
Since 1996
Vane Supply
|
Technical Help
Part Identification
|
ISO 9001:2015
Quality Management
|
OEM-Trained
Engineers
|
Specialists in replacement vanes since 1996. VacAir has spent decades supplying carbon vanes and spare parts for industrial vacuum equipment. DLT 25 buyers deal with a longstanding vacuum pump specialist that understands why accurate part specifications and timely supply matter.
UK stock of the 513431 vane. We stock the 85 × 39 × 4 mm Rietschle carbon vane used in the DLT 25. With six vanes needed per pump, customers can plan a full replacement rather than searching for individual parts at the last minute.
We are pump specialists. Vacuum pumps, their maintenance and their spare parts are central to our business. Our group has worked in the industry since 1996; we are not a general catalogue business that has added carbon vanes without the knowledge to support them. That specialist experience gives purchasers confidence in their supplier.
Competitive prices with the VacAir Price Promise. We aim to offer strong value on replacement carbon vanes without treating knowledgeable service as an optional extra. Our Price Promise terms explain the conditions applying to comparable UK offers.
Customer satisfaction is central to our approach. Our ISO 9001:2015 quality management certification includes a commitment to monitoring customer satisfaction and continual improvement, with the management system subject to external audit. We regard that as a practical responsibility, not simply a badge on a website.
We do not fabricate product reviews, invent customer ratings or display artificial review scores on our website or provide them to search engines. We have no need to. Our products, expertise and reputation have supported customers across the pump industry for decades.
Practical engineering support when the pump needs more. A DLT 25 with uneven vane wear, scoring or contamination may need more than replacement carbon. VacAir’s OEM-trained engineers can assist with inspection, fault finding, vane fitting and repairs, so customers have access to support beyond parts supply.
Established systems and broad delivery coverage. VacAir combines ISO 9001:2015 quality management, accessible UK stock and supply to customers in Britain and overseas. We work to make buying the right vanes straightforward, backed by knowledgeable people and clear communication.
RIETSCHLE DLT 25 CARBON VANE QUESTIONS
Where can I purchase replacement vanes for a Rietschle DLT 25?
How many carbon vanes are fitted to the DLT 25?
What are the measurements of a DLT 25 carbon vane?
What is the minimum DLT 25 vane height?
Is 5134310000 another reference for the 513431 vane?
Should I renew all six DLT 25 vanes together?
What else should be examined during a DLT 25 vane change?
Can VacAir supply DLT 25 spares and arrange fitting?
Trust VacAir Superstore for all your vacuum pump needs.
Contact us for replacement vanes, spare parts, vacuum pumps and engineering support.
