Elmo Rietschle DLT 10 Replacement Carbon Vanes – 513455
RIETSCHLE DLT 10 REPLACEMENT CARBON VANES
Keep your Rietschle DLT 10 ready for service with 513455 replacement carbon vanes from VacAir UK stock. This model takes six 60 × 31 × 4 mm vanes for a complete change. The DLT 10 has a 20 mm minimum working vane height, measured against the 31 mm original height. Order the full set from an established vacuum pump specialist.
Rietschle OEM reference: 513455
Extended OEM reference: 5134550000
VacAir reference: VA513455
Quantity required: 6 vanes per pump
Vane dimensions: 60 × 31 × 4 mm
Minimum vane height: 20 mm
Material: Carbon
Availability: IN STOCK
ELMO RIETSCHLE DLT 10 REPLACEMENT CARBON VANES
Rietschle DLT 10 replacement carbon vanes are available from VacAir UK stock for maintenance teams, pump repairers and businesses that need to keep their dry-running equipment operational. Ordering by the DLT 10 model avoids confusion when the same carbon vane reference appears in other pump ranges.
A full DLT 10 vane change requires six 513455 carbon vanes. Each replacement measures 60 × 31 × 4 mm and is supplied under our VacAir reference VA513455. The extended Rietschle reference is 5134550000.
Although the vane is 31 mm high when new, the DLT 10 has its own specified 20 mm minimum working height. This is a model-specific maintenance figure: it should not be borrowed from another pump merely because that pump uses the same 513455 carbon vane.
For a production-line service, sourcing the complete six-vane set in advance makes the job easier to schedule. During removal, compare the condition of all six vanes; differences in wear can indicate an issue that merits investigation before a fresh set is fitted.
VacAir supplies more than carbon: we also offer Rietschle filters and spare parts, with pump servicing and repairs available from our engineering team.
TECHNICAL INFORMATION
|
DLT 10 VANE FEATURES✓Stocked replacement carbon vanes for DLT 10 equipment
✓Six vanes required for a complete pump change
✓Compact 60 × 31 × 4 mm carbon vane dimensions
✓20 mm minimum working height for DLT 10
✓Rietschle reference 513455 / VacAir VA513455
✓UK stock with specialist pump industry support
|
RIETSCHLE DLT 10 VANE INSPECTION & REPLACEMENT
|
A DLT 10 service should begin with a careful look at the removed carbon vanes and the surfaces they run against. Inspect all six rotor slots, not just the first vane removed. Cracks, rough edges, uneven shortening or a vane that does not slide freely can point to more than ordinary wear. The 513455 vane measures 60 × 31 × 4 mm when new. Its 31 mm original height must be compared with the 20 mm minimum for the DLT 10. If any vane is below the limit or shows damage, replace the set and examine the pump for contributing faults. Use this DLT 10 inspection checklist before refitting: ✓ Record the remaining height of each of the six vanes ✓ Check long edges and corners for fractures or chips ✓ Confirm free movement throughout the rotor slots ✓ Inspect the internal chamber for scoring and wear marks ✓ Look for damage to the rotor and shaft ✓ Check bearing condition and unwanted movement ✓ Inspect the inlet filter and any restriction ✓ Remove loose carbon deposits in line with service guidance ✓ Look for overheating, moisture or other contamination ✓ Investigate differences in wear between the six vanes DLT 10 measurement check: New carbon vane height 31 mm; minimum working height 20 mm. Replace the six-vane set as appropriate and follow the Rietschle service procedure.
|
 |
ELMO RIETSCHLE DLT 10 SPARE PARTS
|
A DLT 10 vane replacement is often carried out alongside other preventative maintenance. VacAir stocks the 513455 carbon vane and supplies filters and associated Rietschle components, allowing customers to source more of their service requirements from one vacuum pump specialist. Before the pump is reassembled, inspect the inlet filtration and the internal running chamber. A restricted filter, damaged running surface or debris left behind by a fractured vane can compromise the new set. Identifying these issues during a planned service can help avoid repeated downtime. Our group has supplied pump vanes and spares since 1996. Whether the DLT 10 is being serviced on site or sent to a workshop, VacAir can supply the six 60 × 31 × 4 mm replacement vanes and discuss other components required for the job. ✓ Rietschle 513455 / 5134550000 replacement carbon vanes ✓ Inlet filtration and routine service components ✓ Rietschle spares for wider repair work ✓ OEM-trained engineering and workshop support |
 |
DLT 10 VANE FITTING & PUMP SERVICING
VacAir sells DLT 10 replacement vanes as the parts required for a complete six-vane change. Customers with their own maintenance capability can purchase the carbon vanes directly, while those needing engineering assistance can use our fitting and repair services.
During a scheduled change, measure the removed 513455 vanes against the 20 mm DLT 10 wear limit. Clean and inspect the rotor slots and internal surfaces in accordance with the manufacturer’s procedure before installing the new vanes.
If the DLT 10 has developed unusual noise, vibration, excess heat or unexpectedly poor performance, a new set of vanes may not be the whole solution. Check for scoring, contamination, poor filtration or other mechanical faults that could cause premature damage.
Our OEM-trained engineers can assist with vane fitting, preventative servicing, inspection and repairs. That gives customers a choice: buy the six vanes from stock, or obtain parts and engineering support from the same specialist supplier.
DLT 10 CARBON VANES — UK & WORLDWIDE SUPPLY
|
From our Leeds base, VacAir supplies DLT 10 carbon vanes to UK manufacturers, maintenance departments and independent service companies. Stock of the 513455 vane helps customers plan routine replacements without waiting to locate a specialist component. For customers outside the UK, we arrange European and worldwide shipments. We can discuss suitable delivery arrangements for both planned maintenance and urgent production-related requirements, including collection where appropriate. When ordering, identify the DLT 10, OEM 513455 (or 5134550000) and the six-vane set. Each vane is 60 × 31 × 4 mm; the model-specific minimum working height is 20 mm. For pricing and despatch information, telephone 0113 2088501 or email sales@vacair-superstore.com. |
 |
WHY BUY RIETSCHLE DLT 10 VANES FROM VACAIR?
|
Since 1996
Vane Supply
|
Technical Help
Part Identification
|
ISO 9001:2015
Quality Management
|
OEM-Trained
Engineers
|
Replacement-vane specialists since 1996. VacAir has spent decades supplying the components used to maintain industrial vacuum pumps. DLT 10 buyers deal with a long-established specialist who understands both carbon vane supply and the equipment in which those vanes operate.
Six DLT 10 vanes from UK stock. We stock 513455 carbon vanes measuring 60 × 31 × 4 mm, so customers can order the complete six-vane replacement set for planned servicing or an unexpected stoppage. Accessible UK stock is a practical advantage when a machine needs to return to service.
We are pump specialists, not simply a catalogue seller. Our group has worked with vacuum pumps and replacement vanes since 1996. We understand the difference between supplying a numbered part and understanding the pump, its service requirements and the problems that can occur when vanes fail.
Competitive prices backed by the VacAir Price Promise. We aim to offer strong value on replacement carbon vanes while retaining experienced people, genuine product knowledge and dependable customer service. Our Price Promise terms set out how comparable offers are assessed.
Customer satisfaction is central to our ethos. Customer feedback and continual improvement form part of our ISO 9001:2015 quality management approach, which is subject to external audit. We take customer satisfaction seriously as an ongoing business responsibility.
We do not fabricate product reviews, invent customer ratings or display artificial review scores on our website or provide them to search engines. We have no need to. Our products, expertise and reputation have supported customers across the pump industry for decades.
Engineering support beyond the sale. If a DLT 10 has damaged vanes, abnormal wear or a suspected internal fault, VacAir’s OEM-trained engineers can assist with inspection, fault finding, vane fitting and repairs. Customers can source the carbon and the wider service expertise through one supplier.
Established quality systems and international reach. VacAir combines ISO 9001:2015 quality management, experienced staff and UK-held stock with delivery to customers across Britain, Europe and worldwide. Our aim is to make buying replacement vanes straightforward and dependable.
RIETSCHLE DLT 10 CARBON VANE QUESTIONS
Where can I buy replacement vanes for a Rietschle DLT 10?
How many carbon vanes are required for a DLT 10 service?
What dimensions should DLT 10 replacement vanes be?
What is the DLT 10 minimum permitted vane height?
Are Rietschle 513455 and 5134550000 the same vane reference?
Can I replace only the shortest DLT 10 vane?
What else should be inspected during a DLT 10 vane change?
Can VacAir supply DLT 10 vanes urgently and arrange fitting?
Trust VacAir Superstore for all your vacuum pump needs.
Contact us for replacement vanes, spare parts, vacuum pumps and engineering support.
