Becker VTLF 360 Vanes

BECKER VTLF 360 REPLACEMENT VANES

VacAir supplies replacement carbon graphite vanes for the Becker VTLF 360, with the correct five-vane requirement held in UK stock for maintenance and replacement.

The VTLF 360 uses 5 WN 124-196 carbon vanes, each measuring 355 × 65 × 5 mm. The VacAir replacement reference is VA901367, corresponding with Becker OEM part number 90136701005.

WN 124-196 is used across several Becker VTLF, DTLF and DVTLF models. On the VTLF 360, however, the requirement is specifically a complete set of five vanes. The model, WN code and OEM reference therefore provide three useful ways of confirming the correct replacement before ordering.

REPLACING BECKER VTLF 360 CARBON VANES

The Becker VTLF 360 is a dry-running rotary vane vacuum pump which uses five carbon graphite vanes. These components gradually wear as the pump operates, making periodic inspection important for maintaining reliable vacuum performance. Engineers should assess the remaining vane height alongside the condition of the running edges, rotor slots and internal surfaces. New vanes have a height of 65 mm, with a confirmed minimum wear height of 41 mm.

VacAir Superstore stocks WN 124-196 replacement carbon vanes for Becker 90136701005, identified by VacAir reference VA901367. Each vane measures 355 × 65 × 5 mm (L × H × T), and a complete VTLF 360 replacement requires five vanes. Where the pump operates in a dusty industrial environment, particular attention should be paid to inlet filtration, accumulated deposits and any unusual differences in vane wear.

VTLF 360 VANE INSPECTION & FITTING PROCEDURE

Click image to enlarge

1. Isolate and prepare the pump. Disconnect the electrical supply, prevent accidental starting and allow the VTLF 360 to cool. Make any connected vacuum equipment safe and follow Becker’s maintenance instructions before opening the pump.
2. Remove and inspect all five vanes. Carefully withdraw the existing vanes, supporting their full length. Examine the running edges and surfaces for cracks, chips, uneven wear or missing sections. Measure the remaining height of each vane against the 41 mm minimum.
3. Inspect the rotor slots. Shine a suitable inspection light along the accessible length of each slot, including the far ends. Look for accumulated deposits, scoring, damaged edges or restrictions that could prevent the replacement vanes moving freely.
4. Remove dust and broken fragments. Thoroughly clean the rotor slots, cylinder and accessible internal surfaces. Account for all pieces of any fractured vane. Controlled compressed air may be used where permitted by Becker’s instructions, with appropriate dust control and protection. Avoid blowing debris further into the pump.
5. Check the replacement specification. Confirm WN 124-196 and dimensions of 355 × 65 × 5 mm. Every replacement vane must slide smoothly into its rotor slot without binding. Never force or tap a tight-fitting vane into position.
6. Fit the first vane correctly. Insert it into the upper accessible rotor slot, observing the correct orientation: the higher edge is the leading edge and the chamfer follows behind.
7. Rotate and fit the remaining vanes. Carefully turn the rotor by hand in accordance with Becker’s instructions, checking that the fitted vane moves freely. Continue until all five replacement vanes are correctly positioned.
8. Complete the final inspection. Confirm that every vane moves freely and no broken fragments remain. Examine the cylinder, end plates, bearings, inlet filtration and cooling arrangements as appropriate. Investigate scoring or abnormal wear before reassembling and testing the pump.

For wider planned maintenance, VacAir also supplies the Becker VTLF 360 service and maintenance kit, containing five replacement carbon vanes and one Becker 909534 inlet filter. Our experienced vacuum pump engineers can assist with vane fitting, servicing, fault investigation and complete pump repairs.

BECKER VTLF 360 SERVICE KIT

BECKER VTLF 360 VANE FITTING & PUMP SERVICING

Many maintenance engineers and factory service departments carry out Becker vane changes in-house, and VacAir can supply the VTLF 360 vanes, service kit and technical support needed for planned maintenance.

Where customers would prefer the work to be carried out professionally, VacAir has highly experienced OEM factory-trained engineers who can replace the vanes on site. Alternatively, the VTLF 360 can be serviced in our specialist workshop.

Our workshop capability extends beyond vane replacement. Where required, we can carry out pump servicing, fault investigation, repair and a full overhaul, with access to Becker filters and other spare parts alongside the replacement vane range.

UK, EUROPEAN & WORLDWIDE SUPPLY

WHY BUY BECKER VTLF 360 VANES FROM VACAIR?

VacAir Superstore has specialised in replacement vacuum pump vanes since 1996. For businesses maintaining a Becker VTLF 360, this means dealing with a supplier that understands the pump, the replacement vane specification and the importance of supplying the correct quantity. Our business is built around vacuum pump components and engineering support, rather than treating carbon vanes as just another item in a general industrial catalogue.

Behind that specialisation is extensive Becker experience. Our senior management team has over 40 years of combined experience working for the former Becker UK agent, giving us first-hand familiarity with Becker vacuum pump ranges, maintenance requirements and spare parts identification. This knowledge is particularly useful when customers are working with established equipment and need reassurance that the replacement components are correct.

For the VTLF 360, we supply the complete requirement of five WN 124-196 replacement carbon vanes, measuring 355 × 65 × 5 mm. These correspond to Becker OEM part number 90136701005 and VacAir code VA901367. Because the WN 124-196 specification is shared by several Becker models, our WN 124-196 / Becker 90136701005 replacement carbon vanes master page provides a useful reference when identifying vanes from their markings or OEM number.

UK stock and the correct model quantity are important parts of our service. Customers can enquire for the five replacement vanes without having to assemble the requirement from individual components. For a scheduled service involving the inlet filter, our dedicated Becker VTLF 360 service and maintenance kit contains five WN 124-196 carbon vanes and one Becker 909534 inlet filter. We can also assist with further requirements from our Becker spare parts range.

We aim to offer competitive replacement carbon vane prices alongside knowledgeable support and dependable supply. Our Price Promise is available for qualifying comparable replacement carbon vanes offered by UK suppliers. The alternative vanes must be new, in stock, intended for the same pump model and application, and of comparable specification and quality. OEM products, clearance stock, promotions, one-off offers and contract pricing are excluded. Any Price Promise request should be made at quotation stage and is subject to our published terms.

Speed of response matters when a vacuum pump is holding up production. VacAir holds WN 124-196 replacement carbon vanes in the UK and offers same-day despatch for confirmed orders placed by 4pm on working days, subject to carrier arrangements. If a VTLF 360 requires attention after that cut-off, customers are still encouraged to call. We will move heaven and earth to investigate urgent despatch possibilities where circumstances allow, although availability of special arrangements cannot be guaranteed.

VacAir’s commitment to dependable service is supported by an externally audited ISO 9001:2015 certified quality management system. We believe that correct product identification, consistent business processes and straightforward customer communication are essential to maintaining confidence in our service. Customer satisfaction and an honest reputation have helped sustain the business over decades of supplying vacuum pump users and engineering companies.

Our involvement does not have to end when the replacement vanes are despatched. VacAir’s experienced OEM factory-trained engineers can assist with VTLF 360 vane fitting, servicing, fault investigation and repairs. Where appropriate, work can be undertaken on site, or the pump can be brought into our specialist workshop for inspection and a more extensive overhaul. This engineering capability provides valuable support when maintenance reveals damage that cannot be addressed by a straightforward vane replacement. Further details are available through our Becker pump repair and servicing information.

We also appreciate the importance of looking beyond the replacement component itself. If a VTLF 360 is showing abnormal vane wear, reduced vacuum performance or signs of contamination, it may be necessary to consider filtration, operating conditions and the wider installation. Customers benefit from discussing these issues with people who understand Becker vacuum pumps and their industrial applications, rather than receiving a parts quotation without technical context.

From our Leeds base, we supply replacement carbon vanes and vacuum pump spares to industrial end users, OEMs, maintenance departments, service engineers and distributors across the UK, Europe and worldwide. Whether the requirement is a single VTLF 360 service kit, a full five-vane replacement set or engineering assistance, VacAir combines decades of specialist knowledge, UK stock, competitive pricing and practical customer support.

FREQUENTLY ASKED QUESTIONS