Becker WN124-034 Vanes, 90133000004, 90133000007, 90133000008

IDENTIFYING BECKER VANE WN 124-034

BECKER PUMP COMPATIBILITY

Becker WN 124-034 vanes are used in the following Becker dry-running rotary vane pump models. The Becker OEM reference reflects the quantity of WN 124-034 vanes required for that pump.

REPLACING BECKER WN 124-034 CARBON VANES

The Becker WN 124-034 replacement carbon vane is used across several Becker DVT, KDT, KVT and Picchio dry-running rotary vane pumps. Regular inspection is important because carbon vanes gradually wear during operation, reducing their remaining height. Identifying wear before the carbon reaches its minimum permitted height helps prevent avoidable pump damage and unexpected machinery downtime.

New WN 124-034 vanes measure 170 × 39 × 4 mm, with an original height of 39 mm and a minimum wear height of 21 mm. Inspect each vane for remaining height, cracks, damaged edges and uneven wear. Where a vane has fractured or the pump has experienced a sudden loss of performance, examine the rotor slots and cylinder for possible damage before fitting replacements.

Three Becker OEM references identify different replacement quantities. Becker 90133000004 identifies four vanes for the KDT 2.80, KDT 3.60, KDT 3.80, KVT 2.80, KVT 3.60, KVT 3.80 and Picchio 2200 models listed on this page. 90133000007 identifies seven vanes for the DVT 3.60 and DVT 3.80, while 90133000008 identifies eight vanes for the DVT 2.80. All three references use the same WN 124-034 vane dimensions.

WN 124-034 maintenance inspection checklist:

CORRECT CARBON VANE ORIENTATION When installing Becker WN 124-034 replacement carbon vanes, first confirm whether the particular pump requires four, seven or eight vanes. Ensure that the rotor slots are clean and free from damage, allowing each vane to move freely throughout its working travel. The higher edge of the vane is the leading edge. The chamfer follows behind the leading edge, as illustrated in the adjacent VacAir fitting diagram. Check the vane profile and confirm the correct orientation for the pump’s direction of rotation. Before fitting new carbon, remove dust and fragments left by the previous vanes. Inspect the cylinder running surface, rotor slots and bearings for scoring, damage or abnormal contact. If a vane has fractured, establish the cause before fitting replacements. Always follow the manufacturer’s fitting instructions for the particular Becker pump model. VacAir’s dedicated engineering department can provide professional vane fitting, pump inspection and mechanical repairs where required.

UK, EUROPEAN & WORLDWIDE VANE SUPPLY

WHY BUY REPLACEMENT BECKER VANES FROM VACAIR?

Three decades of specialist replacement vane supply. Since 1996, VacAir has supplied replacement carbon vanes, vacuum pump spare parts and technical assistance to industrial customers, engineers, OEMs, distributors and maintenance businesses. We understand that customers purchasing replacement vanes often need to keep essential machinery operating. Correct identification, dependable UK stock, competitive prices and responsive technical support matter when a vacuum pump needs maintenance or has unexpectedly failed.

The correct Becker WN 124-034 replacement carbon vanes from UK stock. VacAir stocks the 170 × 39 × 4 mm replacement carbon vane corresponding to Becker WN 124-034, supplied under our reference VA901330. We understand the distinction between Becker OEM 90133000004 for four vanes, 90133000007 for seven vanes and 90133000008 for eight vanes. Our knowledge of the compatible DVT, KDT, KVT and Picchio pumps helps customers obtain the correct quantity for their particular model, avoiding unnecessary delays and ordering mistakes.

Genuine Becker vacuum pump expertise, not just catalogue numbers. Our senior team includes more than 40 years of combined former Becker UK agent experience, providing extensive practical knowledge of Becker vacuum pumps, their applications and maintenance requirements. We can discuss vane wear, correct fitting, filtration and the mechanical condition of the pump itself. Customers benefit from dealing directly with knowledgeable vacuum pump specialists rather than relying on a generic online parts catalogue.

Competitive prices and a genuine Price Promise. VacAir works hard to supply high-quality replacement carbon vanes at competitive prices while providing the support expected from an established specialist. Our published Price Promise explains how qualifying lower prices from other UK suppliers can be considered for genuinely comparable replacement carbon vanes, subject to the stated conditions. We believe customers should receive competitive pricing without sacrificing dependable technical assistance.

Customer satisfaction backed by externally audited ISO 9001:2015 systems. VacAir operates an ISO 9001:2015 quality management system incorporating customer satisfaction monitoring and continual improvement. We value accurate product information, honest communication and reliable service because these are the foundations of lasting business relationships. Our reputation has been built through decades of supplying and supporting industrial vacuum pump users.

Dedicated servicing facilities and OEM-trained engineering support. VacAir is not limited to selling replacement vanes. Our experienced engineers can professionally fit WN 124-034 carbon vanes, inspect the pump’s internal condition and undertake maintenance or mechanical repairs where required. Our modern vacuum pump repair and refurbishment workshop provides specialist fitting, service and repair support at highly competitive rates, offering customers a practical alternative to carrying out repairs themselves.

Replacement vanes, OEM components and complete pump support. VacAir also stocks a wide range of Becker spare parts, including OEM components and high-quality replacement alternatives. Customers can obtain additional maintenance parts and discuss wider pump requirements with a supplier that understands the equipment rather than simply matching catalogue references.

Established reputation, honest advice and worldwide supply. Whether supplying four replacement vanes for a KDT, KVT or Picchio pump, seven vanes for a DVT 3.60 or DVT 3.80, eight vanes for a DVT 2.80, or supporting recurring requirements from industrial service companies, we aim to make purchasing straightforward. Customers benefit from UK vane stock, competitive quotations, international delivery arrangements and the experience of a company that has specialised in vacuum pump components for decades.

FREQUENTLY ASKED QUESTIONS